Information fuel-injection pump
BOSCH
9 410 613 183
9410613183
ZEXEL
104300-6010
1043006010
Rating:
Scheme ###:
1. | [1] | 130060-4020 | PUMP HOUSING |
1/30. | [2] | 029040-6320 | STUD |
1/40. | [1] | 131420-0420 | BLEEDER SCREW |
1/41. | [1] | 026512-1540 | GASKET D15.4&12.2T1.50 |
2. | [1] | 130010-0800 | COVER |
3. | [3] | 029050-5040 | FLAT-HEAD SCREW M5P0.8L9 |
5. | [1] | 130042-0200 | SEAL RING |
16. | [1] | 130010-0900 | COVER |
19. | [2] | 029300-6030 | PLAIN WASHER D11&6.4T0.5 |
20. | [2] | 014110-6440 | LOCKING WASHER |
21. | [2] | 013020-6040 | UNION NUT M6P1H5 |
23. | [1] | 130041-0200 | O-RING |
24. | [1] | 130042-0300 | SEAL RING |
25. | [4] | 029050-5040 | FLAT-HEAD SCREW M5P0.8L9 |
30. | [3] | 130101-2420 | PLUNGER-AND-BARREL ASSY |
36. | [3] | 130110-0220 | DELIVERY-VALVE ASSEMBLY |
37. | [3] | 131112-0600 | COILED SPRING |
40. | [3] | 130115-0000 | GASKET |
41. | [3] | 130116-0300 | FITTING |
45. | [2] | 130122-0420 | PLATE |
55. | [3] | 130200-0220 | TAPPET |
55/2. | [1] | 130201-0000 | UNION NUT |
55/3. | [1] | 130202-0100 | HEXAGON SCREW |
55/4. | [1] | 130203-0100 | BEARING PIN |
55/5. | [1] | 152112-0100 | ROLLER |
55/6. | [1] | 130206-0000 | SLIDER |
61. | [3] | 130215-0000 | COMPRESSION SPRING |
62. | [3] | 130216-0000 | SLOTTED WASHER |
63. | [3] | 130217-0000 | SLOTTED WASHER |
67. | [1] | 130223-0720 | CONTROL RACK |
68. | [1] | 131226-0300 | FLAT-HEAD SCREW |
76. | [2] | 130240-0100 | PINION |
77. | [2] | 130241-0100 | CONTROL SLEEVE |
77A. | [1] | 130241-0200 | CONTROL SLEEVE |
78. | [2] | 131242-0100 | FLAT-HEAD SCREW |
90. | [1] | 130300-1100 | CAMSHAFT |
91. | [1] | 028001-7010 | BEARING PLATE |
91A. | [1] | 016630-2640 | BEARING PLATE |
92. | [1] | 130302-0100 | SPACER RING |
92A. | [1] | 130302-0200 | SPACER RING |
93/1. | [0] | 029311-7010 | SHIM D22&17T0.1 |
93/1. | [0] | 029311-7020 | SHIM D22&17T0.12 |
93/1. | [0] | 029311-7030 | SHIM D22&17T0.14 |
93/1. | [0] | 029311-7040 | SHIM D22&17T0.16 |
93/1. | [0] | 029311-7050 | SHIM D22&17T0.18 |
93/1. | [0] | 029311-7060 | SHIM D22&17T0.5 |
93/1. | [0] | 029311-7070 | SHIM D22&17T1.0 |
93/1. | [0] | 029311-7090 | SHIM D22&17T0.3 |
93/1. | [0] | 029311-7210 | SHIM D22&17T0.7 |
93/1. | [0] | 029311-7220 | SHIM D22&17T1.4 |
93/1. | [0] | 139417-0000 | SHIM D22&17T2.4 |
93A/1. | [0] | 029311-7010 | SHIM D22&17T0.1 |
93A/1. | [0] | 029311-7020 | SHIM D22&17T0.12 |
93A/1. | [0] | 029311-7030 | SHIM D22&17T0.14 |
93A/1. | [0] | 029311-7040 | SHIM D22&17T0.16 |
93A/1. | [0] | 029311-7050 | SHIM D22&17T0.18 |
93A/1. | [0] | 029311-7060 | SHIM D22&17T0.5 |
93A/1. | [0] | 029311-7070 | SHIM D22&17T1.0 |
93A/1. | [0] | 029311-7090 | SHIM D22&17T0.3 |
93A/1. | [0] | 029311-7210 | SHIM D22&17T0.7 |
93A/1. | [0] | 029311-7220 | SHIM D22&17T1.4 |
93A/1. | [0] | 139417-0000 | SHIM D22&17T2.4 |
100. | [1] | 029621-7020 | PACKING RING |
101. | [1] | 130316-0800 | COVER |
104. | [3] | 020006-1440 | BLEEDER SCREW M6P1L14 |
110. | [1] | 013121-2040 | UNION NUT M12P1.5H10 |
111. | [1] | 014111-2440 | LOCKING WASHER D21.5&12.2T3 |
112. | [1] | 025803-1610 | WOODRUFF KEY |
117. | [1] | 029731-2010 | EYE BOLT |
118. | [2] | 026512-1540 | GASKET D15.4&12.2T1.50 |
121. | [2] | 029010-6010 | CAPSULE M6P1.0L7 |
122. | [2] | 026506-1040 | GASKET D9.9&6.2T1 |
165. | [1] | 130448-0500 | CAP |
501. | [1] | 130531-2220 | CONTROL LEVER |
503. | [1] | 154324-1900 | LEVER SHAFT |
504. | [1] | 029630-8080 | O-RING |
505. | [0] | 029311-1070 | SHIM D16&11T0.5 |
505B. | [0] | 029311-1090 | SHIM D16&11T0.3 |
505C. | [0] | 029311-1020 | PLAIN WASHER D16&11T1 |
506. | [2] | 029050-5040 | FLAT-HEAD SCREW M5P0.8L9 |
510. | [1] | 130524-0100 | SWIVELLING LEVER |
514. | [1] | 130510-0000 | GOVERNOR SPRING |
516. | [1] | 130520-0300 | TENSIONING LEVER |
517. | [1] | 130512-3620 | HEADLESS SCREW |
518. | [1] | 130522-0400 | GUIDE LEVER |
519. | [1] | 130526-0000 | CONTROL LEVER |
520. | [1] | 130523-0700 | LEVER SHAFT |
522. | [1] | 029620-8020 | PACKING RING |
522B. | [1] | 139606-0000 | PACKING RING |
523/1. | [0] | 029311-2040 | SHIM D22&12.5T0.1 |
523/1. | [0] | 029311-2050 | SHIM D22&12.5T0.2 |
523/1. | [0] | 029311-2060 | SHIM D22&12.5T0.5 |
523/1. | [0] | 029311-2070 | SHIM D22&12.5T1 |
523/1. | [0] | 029311-2130 | SHIM D22&12.5T0.6 |
523/1. | [0] | 029311-2140 | SHIM D22&12.5T0.7 |
523/1. | [0] | 029311-2150 | SHIM D22&12.5T0.8 |
523/1. | [0] | 029311-2160 | SHIM D22&12.5T0.9 |
524. | [1] | 130501-0200 | SLIDING PIECE |
528. | [1] | 154102-2120 | FLYWEIGHT ASSEMBLY |
530. | [1] | 014110-8440 | LOCKING WASHER |
531. | [1] | 029230-8000 | UNION NUT |
535. | [1] | 154325-0800 | SLOTTED WASHER |
536. | [1] | 154171-4900 | COILED SPRING |
537/1. | [0] | 029310-8010 | PLAIN WASHER D15&8.4T0.2 |
537/1. | [0] | 029310-8020 | PLAIN WASHER D15&8.4T0.3 |
537/1. | [0] | 029310-8490 | SHIM D15&8.4T0.5 |
537/1. | [0] | 029310-8500 | SHIM D15&8.4T1 |
541. | [1] | 154350-7600 | GASKET |
542. | [1] | 130540-0300 | COVER |
543. | [4] | 020006-1840 | BLEEDER SCREW M6P1L18 |
544. | [1] | 139020-0000 | BLEEDER SCREW |
545. | [1] | 154011-0800 | HEXAGON NUT |
546. | [3] | 020006-2240 | BLEEDER SCREW M6P1L22 |
547. | [1] | 155615-1000 | FLAT-HEAD SCREW |
548. | [1] | 029240-6010 | UNION NUT M6P1.0H5* |
569. | [1] | 026512-1540 | GASKET D15.4&12.2T1.50 |
570. | [1] | 029111-2070 | CAPSULE M12P1.5L10 |
575. | [1] | 130511-1500 | COILED SPRING |
577. | [1] | 130514-0020 | GUIDE SLEEVE |
578. | [2] | 029331-2090 | GASKET D17&12.5T1 |
579. | [1] | 029201-2030 | UNION NUT M12P1.0H4 |
580. | [1] | 154159-0100 | CAP NUT |
583. | [1] | 155615-1000 | FLAT-HEAD SCREW |
584. | [1] | 029240-6010 | UNION NUT M6P1.0H5* |
600. | [1] | 155608-6420 | CONTROL LEVER |
601. | [1] | 154206-1400 | BUSHING |
602. | [1] | 130532-0000 | COILED SPRING |
603. | [1] | 130527-0100 | BUSHING |
604. | [1] | 029300-8010 | PLAIN WASHER D15&8T1.00 |
605. | [1] | 130527-0200 | PLAIN WASHER |
606. | [1] | 015320-1540 | SPLIT PIN |
Include in #1:
104303-3380
as FUEL INJECTION PUMP
Cross reference number
Zexel num
Bosch num
Firm num
Name
104300-6010
9 410 613 183
FUEL-INJECTION PUMP
Q
Q
Information:
start by:a) remove fuel injection pump housing and governor 1. Install the fuel injection pump housing on tool (A).2. Remove the bolts (1) that hold the governor housing (2) to the fuel injection pump housing.3. Remove the governor housing (2). 4. Remove two springs (4) and the seat (5) from the governor housing.5. Remove the seat (7) from the shaft.6. Remove the spring (6) from the shaft.7. Remove the cover (3) from the pump housing. 8. Remove the shaft (8) and the lever (9) from the pump housing. 9. Remove the thrust collar (11) from the shaft.10. Remove the cover (10) from the pump housing. 11. Loosen the two bolts (13) that hold the torque spring assembly (12) and remove it from the pump housing. 12. Remove the pin (15) from the pump housing.13. Remove the screw (14) and the nut (16) from the pump housing.14. Remove the ring that holds the lever and remove the lever (18) from the dowel (17).15. Remove the dowel (17) from the pump housing. Dowel does not need to be removed unless camshaft is to be removed.
Pull on the shield only a small amount in each location so it will not have distortion or damage. A damaged shield must be replaced.
16. Remove the shield (19) from the camshaft with tool (B). 17. Install the timing pin (C) to hold the camshaft.18. Remove the bolts (20) that hold the flyweight assembly to the camshaft. 19. Remove the flyweight assembly (21) from the camshaft.20. Remove the timing pin (C) from the pump housing.Connection Of Governor To Fuel Injection Pump Housing
1. Put the fuel injection pump housing on the bracket assembly (A).2. Install the timing pin (B) to hold the camshaft.3. Put the flyweight assembly (1) in position on the camshaft. Be sure the pin that holds the shaft (2) is in position on the back of the flyweight assembly.4. Install the bolts that hold the flyweight assembly to the camshaft and tighten to a torque of 10 2 lb. ft. (1.38 0.28 mkg).5. Remove the timing pin (B). 6. Put the shield (3) in position over the flyweights. 7. Use the driver (C) to install the shield the remainder of the way on to the camshaft. 8. Put a new O-ring seal on the dowel (4) and install the dowel in the pump housing. Make the dowel even with the machined surface of the counterbore on the outside of the housing. 9. Put the lever (8) on the dowel (4) and install the ring that holds it on the dowel.10. Install the screw (6) and the nut (7) in the pump housing.11. Install the pin (5) in the pump housing. 12. Put the torque spring assembly (10) in position on the housing and tighten the two bolts (11) that hold it to the housing.13. Install the cover (9) on the pump housing. 14. Put the thrust collar (13) in position between the flyweights. Lift the flyweights up with a piece of wire
Pull on the shield only a small amount in each location so it will not have distortion or damage. A damaged shield must be replaced.
16. Remove the shield (19) from the camshaft with tool (B). 17. Install the timing pin (C) to hold the camshaft.18. Remove the bolts (20) that hold the flyweight assembly to the camshaft. 19. Remove the flyweight assembly (21) from the camshaft.20. Remove the timing pin (C) from the pump housing.Connection Of Governor To Fuel Injection Pump Housing
1. Put the fuel injection pump housing on the bracket assembly (A).2. Install the timing pin (B) to hold the camshaft.3. Put the flyweight assembly (1) in position on the camshaft. Be sure the pin that holds the shaft (2) is in position on the back of the flyweight assembly.4. Install the bolts that hold the flyweight assembly to the camshaft and tighten to a torque of 10 2 lb. ft. (1.38 0.28 mkg).5. Remove the timing pin (B). 6. Put the shield (3) in position over the flyweights. 7. Use the driver (C) to install the shield the remainder of the way on to the camshaft. 8. Put a new O-ring seal on the dowel (4) and install the dowel in the pump housing. Make the dowel even with the machined surface of the counterbore on the outside of the housing. 9. Put the lever (8) on the dowel (4) and install the ring that holds it on the dowel.10. Install the screw (6) and the nut (7) in the pump housing.11. Install the pin (5) in the pump housing. 12. Put the torque spring assembly (10) in position on the housing and tighten the two bolts (11) that hold it to the housing.13. Install the cover (9) on the pump housing. 14. Put the thrust collar (13) in position between the flyweights. Lift the flyweights up with a piece of wire
Have questions with 104300-6010?
Group cross 104300-6010 ZEXEL
Iseki
104300-6010
9 410 613 183
FUEL-INJECTION PUMP