104298-6000 ZEXEL 9 410 617 019 BOSCH FUEL-INJECTION PUMP 9410617019 1042986000 173015101


 

Information fuel-injection pump

BOSCH 9 410 617 019 9410617019
ZEXEL 104298-6000 1042986000
KUBOTA 173015101 173015101
104298-6000 FUEL-INJECTION PUMP
Rating:
74
Buy FUEL-INJECTION PUMP 104298-6000 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104298-6000
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2)
10. NOZZLE-HOLDER
11. NOZZLE

Scheme ###:

5. [6] 140153-9020 PLUNGER-AND-BARREL ASSY
12. [6] 140110-4720 DELIVERY-VALVE ASSEMBLY
13. [6] 140112-2900 COMPRESSION SPRING
16. [6] 140115-1400 GASKET
17. [6] 140116-4800 FITTING
18. [6] 140117-1500 SLOTTED WASHER
20. [6] 016500-1520 O-RING
40. [6] 140200-1620 TAPPET
44. [6] 140212-0300 BEARING PIN
45. [2] 140213-0500 WIRE
50. [6] 140215-1900 COMPRESSION SPRING
51. [6] 140216-0800 SLOTTED WASHER
52. [6] 140217-2200 SLOTTED WASHER
53/1. [1] 140217-5000 PLATE D19T2.60
53/1. [1] 140217-5100 PLATE D19T2.65
53/1. [1] 140217-5200 PLATE D19T2.70
53/1. [1] 140217-5300 PLATE D19T2.75
53/1. [1] 140217-5400 PLATE D19T2.80
53/1. [1] 140217-5500 PLATE D19T2.85
53/1. [1] 140217-5600 PLATE D19T2.90
53/1. [1] 140217-5700 PLATE D19T2.95
53/1. [1] 140217-5800 PLATE D19T3.00
53/1. [1] 140217-5900 PLATE D19T3.05
53/1. [1] 140217-6000 PLATE D19T3.10
53/1. [1] 140217-6100 PLATE D19T3.15
53/1. [1] 140217-6200 PLATE D19T3.20
53/1. [1] 140217-6300 PLATE D19T3.25
53/1. [1] 140217-6400 PLATE D19T3.30
53/1. [1] 140217-6500 PLATE D19T3.35
53/1. [1] 140217-6600 PLATE D19T3.40
53/1. [1] 140217-6700 PLATE D19T3.45
53/1. [1] 140217-6800 PLATE D19T3.50
53/1. [1] 140217-6900 PLATE D19T3.55
53/1. [1] 140217-7000 PLATE D19T3.60
53/1. [1] 140217-7100 PLATE D19T3.65
53/1. [1] 140217-7200 PLATE D19T3.70
53/1. [1] 140217-7300 PLATE D19T3.75
53/1. [1] 140217-7400 PLATE D19T3.80
53/1. [1] 140217-7500 PLATE D19T3.85
53/1. [1] 140217-7600 PLATE D19T3.90
53/1. [1] 140217-7700 PLATE D19T3.95
53/1. [1] 140217-7800 PLATE D19T4.00
53/1. [1] 140217-7900 PLATE D19T4.05
53/1. [1] 140217-8000 PLATE D19T4.10
53/1. [1] 140253-2000 PLATE
53/1. [1] 140253-2100 PLATE
53/1. [1] 140253-2200 PLATE
53/1. [1] 140253-2300 PLATE
53/1. [1] 140253-2400 PLATE
53/1. [1] 140253-2500 PLATE
53/1. [1] 140253-2600 PLATE
53/1. [1] 140253-2700 PLATE
53/1. [1] 140253-2800 PLATE
53/1. [1] 140253-2900 PLATE
53/1. [1] 140253-3000 PLATE
53/1. [1] 140253-3100 PLATE
53/1. [1] 140253-3200 PLATE
53/1. [1] 140253-3300 PLATE
53/1. [1] 140253-3400 PLATE
53/1. [1] 140253-3500 PLATE
53/1. [1] 140253-3600 PLATE
53/1. [1] 140253-3700 PLATE
53/1. [1] 140253-3800 PLATE
53/1. [1] 140253-3900 PLATE
53/1. [1] 140253-4000 PLATE
53/1. [1] 140253-4100 PLATE
53/1. [1] 140253-4200 PLATE
53/1. [1] 140253-4300 PLATE
53/1. [1] 140253-4400 PLATE
53/1. [1] 140253-4500 PLATE
53/1. [1] 140253-4600 PLATE
53/1. [1] 140253-4700 PLATE
53/1. [1] 140253-4800 PLATE
53/1. [1] 140253-4900 PLATE
60. [1] 140243-2620 CONTROL RACK
77. [6] 140241-2700 CONTROL SLEEVE
93. [1] 140402-1500 EYE BOLT
94. [2] 026514-1840 GASKET D17.9&14.2T1
156. [5] 140255-0000 BEARING PIN
156. [5] 140255-0000 BEARING PIN
157. [5] 029320-6010 LOCKING WASHER
157. [5] 029320-6010 LOCKING WASHER
158. [1] 140256-0700 COVER
159. [1] 140256-0500 COVER
160. [4] 010735-1020 FLAT-HEAD SCREW M5P0.9L10
160. [4] 010735-1020 FLAT-HEAD SCREW M5P0.9L10

Include in #2:

104298-6000 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
104298-6000 
9 410 617 019 
NP-PFR6KD75/2NP1 
173015101  KUBOTA
FUEL-INJECTION PUMP
K 23DF FUEL INJECTION PUMP PFR-6KD PFR




Information:


ACTION REQUIRED
****Parts Stock ****
Remove all 345-2985 nozzles from dealer parts stock.
Rework the following engines in dealer parts stock and/or dealer exchange inventory:
250-7100, 281-6501, 314-2485, 360-1646, 365-9318, 365-9319, 365-9320, 365-9321, and 381-8006 Service Replacement C175-16 Engines with a B7B prefix
Rework the following engines: B7B001-700.
288-8962, 314-2486, 365-9324, and 365-9325 Service Replacement C175-16 Engines with a JTL prefix
Rework the following engines: JTL001-276.
262-1300, 282-2060, 360-1647, 365-9326, 365-9327, 365-9328, and 365-9329 Service Replacement C175-20 Engines with a LLM prefix
Rework the following engines: LLM001-407.
For engines in dealer parts stock and/or dealer exchange inventory, refer to the Action Required for the Affected Product.
****Affected Product****
1. Remove the 345-2985 Ether Nozzles and supply lines on the left and right intake manifolds. If the 345-2985 Ether Nozzles are found to be broken, ensure all pieces are removed prior to putting the engine back in service.
2. Install the 8T-6764 Plug in each intake manifold.
3. Install a 6V-9829 Cap and 6V-8397 O-ring to plug both ether supply lines.
4. Disable ether injection with Cat ET (Electronic Technican).
Refer to Image1 for the location of the plug and cap on the right hand side of a 16 cylinder engine.
Refer to Image2 for the location of the plug and cap on the right hand side of a 20 cylinder engine.
Image1
Image2
OWNER NOTIFICATION
U.S. and Canadian owners will receive the attached Owner Notification.
SERVICE CLAIM ALLOWANCES
****Parts Stock****
Submit one claim for all parts removed from dealer parts stock. The parts listed in the Parts Needed will be allowed for each engine that is reworked. 1 hour labor will be allowed for each engine that is reworked. Include the engine serial numbers and arrangement numbers in the service claim story.
****Affected Product****
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 1.0-hour job
PARTS DISPOSITION
****Parts Stock****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
****Affected Product****
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE ETHER NOZZLES ON CERTAIN 793F, 793F XQ, 795F, 797F, AND 797F XQ OFF-HIGHWAY TRUCKS
MODELS INVOLVED - 793F, 793F XQ, 795F, 797F, 797F XQ
Dear Caterpillar Product Owner:
The ether nozzles need to be replaced with a plug and have the supply lines capped off. You will not be charged for the service performed.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
Please refer the dealer to their Service Letter dated 01Mar2012 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 01Mar2012 Service Letter

Have questions with 104298-6000?





Group cross 104298-6000 ZEXEL

Kubota 

104298-6000  
9 410 617 019 
NP-PFR6KD75/2NP1 
173015101 
FUEL-INJECTION PUMP
Back to top