Fuel injectors
  1. Home
  2. fuel
  3. #1042943054

Buy 104294-3054 ZEXEL 9 410 617 036 BOSCH FUEL-INJECTION PUMP 9410617036 1042943054 8944079562


 

Information fuel-injection pump

BOSCH 9 410 617 036 9410617036
ZEXEL 104294-3054 1042943054
ISUZU 8944079562 8944079562
104294-3054 FUEL-INJECTION PUMP
Rating:
75
Buy FUEL-INJECTION PUMP 104294-3054 zexel genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
Bosch 9410617036 Fuel-Injection Pump
£380.83
 

24 Oct 2018

Robert Bos: Robert Bosch GmbH Au
Bosch 9410617036 Fuel-Injection Pump
Preparation of fuel injection pump: online || Fuel Type: Diesel

Components :

0. INJECTION-PUMP ASSEMBLY 104294-3054
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1001
8. Nozzle and Holder 8-94116-934-2
9. Open Pre:MPa(Kqf/cm2) 11.8{120}
10. NOZZLE-HOLDER 105078-0002
11. NOZZLE 105007-1010

Scheme ###:

PLUNGER-AND-BARREL ASSY
5. [3] 140153-8920 PLUNGER-AND-BARREL ASSY
12. [3] 140110-4420 DELIVERY-VALVE ASSEMBLY
13. [3] 140112-1700 COMPRESSION SPRING
16. [3] 140115-1400 GASKET
17. [3] 140116-7600 FITTING
18. [3] 140117-1700 FILLER PIECE
20. [3] 016500-1520 O-RING
40. [3] 140200-1620 TAPPET
44. [3] 140212-0300 BEARING PIN
45. [1] 140213-0500 WIRE
50. [3] 140215-1900 COMPRESSION SPRING
51. [3] 140216-0800 SLOTTED WASHER
52. [3] 140217-2200 SLOTTED WASHER
53/1. [1] 140217-5000 PLATE D19T2.60
53/1. [1] 140217-5100 PLATE D19T2.65
53/1. [1] 140217-5200 PLATE D19T2.70
53/1. [1] 140217-5300 PLATE D19T2.75
53/1. [1] 140217-5400 PLATE D19T2.80
53/1. [1] 140217-5500 PLATE D19T2.85
53/1. [1] 140217-5600 PLATE D19T2.90
53/1. [1] 140217-5700 PLATE D19T2.95
53/1. [1] 140217-5800 PLATE D19T3.00
53/1. [1] 140217-5900 PLATE D19T3.05
53/1. [1] 140217-6000 PLATE D19T3.10
53/1. [1] 140217-6100 PLATE D19T3.15
53/1. [1] 140217-6200 PLATE D19T3.20
53/1. [1] 140217-6300 PLATE D19T3.25
53/1. [1] 140217-6400 PLATE D19T3.30
53/1. [1] 140217-6500 PLATE D19T3.35
53/1. [1] 140217-6600 PLATE D19T3.40
53/1. [1] 140217-6700 PLATE D19T3.45
53/1. [1] 140217-6800 PLATE D19T3.50
53/1. [1] 140217-6900 PLATE D19T3.55
53/1. [1] 140217-7000 PLATE D19T3.60
53/1. [1] 140217-7100 PLATE D19T3.65
53/1. [1] 140217-7200 PLATE D19T3.70
53/1. [1] 140217-7300 PLATE D19T3.75
53/1. [1] 140217-7400 PLATE D19T3.80
53/1. [1] 140217-7500 PLATE D19T3.85
53/1. [1] 140217-7600 PLATE D19T3.90
53/1. [1] 140217-7700 PLATE D19T3.95
53/1. [1] 140217-7800 PLATE D19T4.00
53/1. [1] 140217-7900 PLATE D19T4.05
53/1. [1] 140217-8000 PLATE D19T4.10
53/1. [1] 140253-2000 PLATE
53/1. [1] 140253-2100 PLATE
53/1. [1] 140253-2200 PLATE
53/1. [1] 140253-2300 PLATE
53/1. [1] 140253-2400 PLATE
53/1. [1] 140253-2500 PLATE
53/1. [1] 140253-2600 PLATE
53/1. [1] 140253-2700 PLATE
53/1. [1] 140253-2800 PLATE
53/1. [1] 140253-2900 PLATE
53/1. [1] 140253-3000 PLATE
53/1. [1] 140253-3100 PLATE
53/1. [1] 140253-3200 PLATE
53/1. [1] 140253-3300 PLATE
53/1. [1] 140253-3400 PLATE
53/1. [1] 140253-3500 PLATE
53/1. [1] 140253-3600 PLATE
53/1. [1] 140253-3700 PLATE
53/1. [1] 140253-3800 PLATE
53/1. [1] 140253-3900 PLATE
53/1. [1] 140253-4000 PLATE
53/1. [1] 140253-4100 PLATE
53/1. [1] 140253-4200 PLATE
53/1. [1] 140253-4300 PLATE
53/1. [1] 140253-4400 PLATE
53/1. [1] 140253-4500 PLATE
53/1. [1] 140253-4600 PLATE
53/1. [1] 140253-4700 PLATE
53/1. [1] 140253-4800 PLATE
53/1. [1] 140253-4900 PLATE
60. [1] 140243-1120 CONTROL RACK
77. [3] 140241-2700 CONTROL SLEEVE
93. [1] 140402-0800 EYE BOLT
94. [2] 026512-1540 GASKET D15.4&12.2T1.50
110. [1] 140420-1400 BLEEDER SCREW
111. [1] 026508-1240 GASKET D11.9&8.2T1
156. [2] 140255-0000 BEARING PIN
157. [2] 029320-6010 LOCKING WASHER
158. [1] 140256-0400 COVER
159. [2] 010735-1020 FLAT-HEAD SCREW M5P0.9L10

Include in #2:

104294-3054 as INJECTION-PUMP ASSEMBLY
104745-0063 as _

Cross reference number

Zexel num
Bosch num
Firm num
Name
104294-3054 
9 410 617 036 
NP-PFR3KD55/2NP8 
8944079562  ISUZU
FUEL-INJECTION PUMP
K 23DC FUEL INJECTION PUMP PFR-3KD PFR




Information:

Fuel Injection Nozzles
Disassembly of Fuel Injection Nozzles
Inspection of Fuel Injection Nozzles
Check each fuel injection nozzle for the following, and if defects are found, repair or replace the fuel injection nozzle.(1) Inspection of injection start pressure(a) Install each fuel injection nozzle on the nozzle tester, and move the handle up and down to release air.(b) Operate the handle of the tester at a rate of about 1 stroke per second, and read the indication on the pressure gage. The indication rises slowly, and the indicator oscillates during spraying. To obtain the injection start pressure value, read the indication when the indicator starts to oscillate.
Inspection of fuel injection nozzle valve opening(c) If the injection start pressure deviates significantly from the standard value, disassemble the fuel injection nozzle, and make an adjustment by changing the washer thickness. 0.1 mm [0.0039 in.] thickness of shims will change the injection pressure 0.98 Mpa (10 kgf/cm2 [142 psi]. The shims are available in 10 different thickness from 1.25 to 1.70 mm [0.0492 to 0.0669 in.] increment of 0.05 mm [0.0020 in.]
Never tap the tip of the nozzle tip when removing the nozzle tip.
Replacement of fuel injection nozzle tip(2) Inspection of fuel injection nozzle spray pattern(a) When inspecting each fuel injection nozzle with the nozzle tester, also check the nozzle for clogs, spray pattern and leakage.(b) Make sure that the fuel is sprayed straight from the nozzle when the handle of the tester is operated at a rate of about 1 stroke per second.
Inspection of spray pattern of fuel injection nozzle(3) Cleaning and replacement of faulty nozzles(a) Loosen the nozzle retaining nut, remove the nozzle tip, and clean the needle valve and body.
Never tap the tip of the nozzle tip when removing the nozzle tip.
(b) Use a fresh cleaning solution to clean the needle valve and body. After cleaning, assemble the needle valve and body in clean diesel fuel. The needle valve and body are precision finished. Handle them carefully, and do not change the combination of parts.
Cleaning of fuel injection nozzle tip(c) Tighten the nozzle retaining nut on the nozzle tip to the specified torque.(d) If the spray pattern is still not acceptable after adjustment and cleaning, replace the nozzle tip. (a) Never touch the sliding surface of the needle valve.(b) When installing a new nozzle tip, remove the seal film (synthetic resin film), and slide needle valve in the nozzle in a fresh cleaning solution to remove anti-rust oil coating thoroughly from the new nozzleReassembly of Fuel Injection Nozzles
Fuel Filter
Disassembly and Inspection of Fuel Filter

Have questions with 104294-3054?





Group cross 104294-3054 ZEXEL

Isuzu 

104294-3050  

104294-3054 
 
5156101370 
FUEL-INJECTION PUMP
104294-3051  

104294-3054 
 
5156101372 
FUEL-INJECTION PUMP
104294-3052  

104294-3054 
 
8944079560 
FUEL-INJECTION PUMP
104294-3053  

104294-3054 
9 410 617 011 
8944079561 
FUEL-INJECTION PUMP
104294-3054  
9 410 617 036 
NP-PFR3KD55/2NP8 
8944079562 
FUEL-INJECTION PUMP
Back to top