104266-5050 ZEXEL 9 410 617 517 BOSCH FUEL-INJECTION PUMP 9410617517 1042665050

Information fuel-injection pump

BOSCH 9 410 617 517 9410617517

ZEXEL 104266-5050 1042665050

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 104266-5050 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104266-5050
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)
10.	NOZZLE-HOLDER
11.	NOZZLE

Scheme ###:

5.	[1]	141176-0621	PLUNGER-AND-BARREL ASSY
12.	[1]	141140-9120	DELIVERY-VALVE ASSEMBLY
13.	[1]	141112-6400	COMPRESSION SPRING
17.	[1]	141136-7500	FITTING
18.	[1]	141117-8400	FILLER PIECE
20.	[1]	141118-2000	O-RING
21.	[1]	141119-3600	FLANGE BUSHING
22.	[6]	141124-1300	BLEEDER SCREW
25.	[1]	141482-9600	O-RING
50.	[1]	141215-5401	COMPRESSION SPRING
51.	[1]	141216-1800	SLOTTED WASHER
52.	[1]	141217-5500	SLOTTED WASHER
53.	[1]	141218-7920	GUIDE
55.	[1]	141220-1200	LOCKING WASHER
60.	[1]	141244-8200	CONTROL RACK
77.	[1]	141241-7200	CONTROL SLEEVE
81.	[1]	141245-2000	POINTER
82/1.	[0]	023500-6210	PLAIN WASHER D11&6.4T1.5
82/1.	[0]	029300-6010	PLAIN WASHER D11&6.4T0.8
82/1.	[0]	029300-6020	PLAIN WASHER D11&6.4T0.35
83.	[1]	020006-1440	BLEEDER SCREW M6P1L14
92.	[1]	141401-2500	BUSHING
93.	[1]	141402-2720	EYE BOLT
94.	[2]	141403-1600	GASKET
110.	[1]	140420-1600	BLEEDER SCREW
111.	[1]	141421-0000	GASKET
160.	[1]	141418-1400	SET OF NUTS
161.	[1]	141107-0700	GASKET
162.	[1]	141480-0900	COVER
163.	[1]	010038-1020	BLEEDER SCREW
164.	[1]	141107-0700	GASKET
170.	[1]	141133-1000	CAPSULE
171.	[1]	141403-1600	GASKET

Include in #1:

101491-9672 as _

101491-9673

Include in #2:

104266-5050 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

104266-5050

9 410 617 517

FUEL-INJECTION PUMP
* K

Information:

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
There have been some isolated instances of issues with the Diesel Particulate Filter (DPF) on certain C3.4B engines.Solution
Caterpillar is aware of this problem. Follow the procedure that is detailed below.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 233-7191 Hose Cleaner Gp 1
Obtain a fuel sample from the engine.
Obtain a lubricating oil sample from the engine.
Attach a copy of the full service history of the engine to the Service Information Systems (SIMSi) report. Include the change history of the following components:
Engine oil
Engine oil filter
Engine fuel filter
Crankcase breather filter
Ensure that the breather element is clean and free from wear or damage. Replace the breather element. Refer to Operation and Maintenance Manual, Engine Crankcase Breather Element - Replace for the correct procedure. Ensure that the inlet hose is clean and free from restriction. If the inlet hose requires replacing, refer to Disassembly and Assembly, Crankcase Breather - Install for the correct procedure.
Determine the service hours of the engine air cleaner element. Ensure that the engine air cleaner element is clean and free from wear, damage, or restriction. If necessary, replace the engine air cleaner element. Refer to Operation and Maintenance Manual, Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace for the correct procedure. Ensure that the hose assemblies are clean and free from restriction and dust.
Inspect the inlet and outlet hoses of the turbocharger for the presence of excessive lubricating oil. If necessary, take photographs inside both inlet and outlet hoses. If necessary, take photographs inside the compressor housing for the inlet and outlet. If excessive lubricating oil is found, replace the turbocharger. Refer to Disassembly and Assembly, Turbocharger