104266-1150 ZEXEL 9 410 618 071 BOSCH FUEL-INJECTION PUMP 9410618071 1042661150 e286470200zz


 

Information fuel-injection pump

BOSCH 9 410 618 071 9410618071
ZEXEL 104266-1150 1042661150
DAIHATSU E286470200ZZ e286470200zz
104266-1150 FUEL-INJECTION PUMP
Rating:
40
Buy FUEL-INJECTION PUMP 104266-1150 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104266-1150
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2)
10. NOZZLE-HOLDER
11. NOZZLE

Scheme ###:

1. [1] 141055-4001 PUMP HOUSING
5. [1] 141187-2920 PLUNGER-AND-BARREL ASSY
7. [2] 141133-6901 CAPSULE
7. [2] 141133-6901 CAPSULE
8. [2] 141485-1203 O-RING
8. [2] 141485-1203 O-RING
12. [1] 141145-4021 DELIVERY-VALVE ASSEMBLY
12/1. [1] 141146-1800 SEAT;D.V.
12/2. [1] 141138-0500 FITTING
12/3. [1] 141142-9100 VALVE BODY
12/4. [1] 141144-0500 COMPRESSION SPRING
12/5. [1] 141113-3201 SLOTTED WASHER
12/6. [1] 141145-8400 VALVE BODY
12/7. [1] 141112-8701 COILED SPRING
12/8. [1] 141113-2003 FILLER PIECE
12/9. [2] 010235-1620 HEX-SOCKET-HEAD CAP SCREW
19. [2] 016421-0700 BACKUP RING
20. [1] 141118-3002 O-RING
22. [6] 141124-4200 BLEEDER SCREW
24. [2] 016421-0600 BACKUP RING
25. [3] 141485-1002 O-RING
50. [1] 141215-7401 COMPRESSION SPRING
51. [1] 141216-5100 SLOTTED WASHER
52. [1] 141217-8300 SLOTTED WASHER
53. [1] 141218-9000 GUIDE
55. [1] 141220-2900 LOCKING WASHER
60. [1] 141291-1500 CONTROL RACK
77. [1] 141292-2000 CONTROL SLEEVE
81. [1] 141245-2000 POINTER
82/1. [0] 023500-6210 PLAIN WASHER D11&6.4T1.5
82/1. [0] 029300-6010 PLAIN WASHER D11&6.4T0.8
82/1. [0] 029300-6020 PLAIN WASHER D11&6.4T0.35
83. [1] 020006-1440 BLEEDER SCREW M6P1L14
160. [1] 141418-2600 SET OF NUTS
161. [1] 141403-2000 GASKET

Include in #1:

Include in #2:

104266-1150 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
104266-1150 
9 410 618 071 
NP-PF1SV260A00N47 
E286470200ZZ  DAIHATSU
FUEL-INJECTION PUMP
K




Information:

Fluids/Filters Recommendation
Literature InformationThis manual should be stored in the literature holder or in the literature storage area on the machine. Immediately replace this manual if lost, damaged, or unreadable.The information contained in this document is the most current information available for fluid maintenance and service products. Special maintenance and service products may be required for some machine compartments. Refer to the Operation and Maintenance Manual for your machine for the maintenance and service requirements. Read, study, and keep this manual with the product. This manual should be read carefully before using this product for the first time and before performing maintenance.Whenever a question arises regarding your product, or this publication, consult your dealer for the latest available information.SafetyRefer to the Operation and Maintenance Manual for your machine for all safety information. Read and understand the basic safety precautions listed in the Safety Section. In addition to safety precautions, this section identifies the text and locations of warning signs used on the machine.Read and understand the applicable precautions listed in the Maintenance and Operation Sections before operating or performing lubrication, maintenance, and repair on this machine.MaintenanceRefer to the Operation and Maintenance Manual for your machine to determine all maintenance requirements.Proper maintenance and repair are essential to keep the equipment and systems operating correctly. As the owner, you are responsible for the performance of the required maintenance listed in the Owner Manual, Operation and Maintenance Manual, and Service Manual.Maintenance Interval ScheduleUse the Maintenance Interval Schedule in the Operation and Maintenance Manual for your machine to determine servicing intervals. Use the service hour meter to determine servicing intervals. Calendar intervals shown (daily, weekly, monthly, etc.) can be used instead of service hour meter intervals if calendar intervals provide more convenient servicing schedules and approximate the indicated service hour meter reading. Recommended service should always be performed at the interval that occurs first.Under extremely severe, dusty, or wet operating conditions, more frequent lubrication and/or filter changes than is specified in the maintenance intervals chart might be necessary.Following the recommended maintenance intervals reduces the risk of excessive wear and potential failures of components.Aftermarket Products and Warranty
When auxiliary devices, accessories or consumables (filters, oil, additives, catalysts, fuel, etc.) made by other manufacturers are used on Cat products, the Caterpillar warranty is not affected simply because of such use. Failures that result from the installation or usage of other manufacturers auxiliary devices, accessories or consumables, however, are not Caterpillar factory defects and therefore are NOT covered by Caterpillar's warranty.Caterpillar is not in a position to evaluate the many auxiliary devices, accessories or consumables promoted by other manufacturers and their effect on Cat products. Installation or use of such items is at the discretion of the customer who assumes ALL risks for the effects that result from this usage.Furthermore, Caterpillar does not authorize the use of its trade name, trademark, or logo in a manner which implies our endorsement of these aftermarket products.

Have questions with 104266-1150?





Group cross 104266-1150 ZEXEL

 
 

 
 
FUEL-INJECTION PUMP

Daihatsu 

9 410 617 636 
E286470030 
FUEL-INJECTION PUMP
9 410 617 135 
 
FUEL-INJECTION PUMP

Daihatsu 

9 410 617 910 
NP-PF1SV260A00N32 
E286470030DZ 
FUEL-INJECTION PUMP
9 410 617 637 
E286470020BZ 
FUEL-INJECTION PUMP
9 410 617 136 
 
FUEL-INJECTION PUMP

Daihatsu 

9 410 617 899 
NP-PF1SV260A00N33 
E286470020CZ 
FUEL-INJECTION PUMP
9 410 617 990 
NP-PF1SV260A00N40 
E286470130ZZ 
FUEL-INJECTION PUMP
9 410 618 000 
NP-PF1SV260A00N41 
E286470120ZZ 
FUEL-INJECTION PUMP
104266-1150  
9 410 618 071 
NP-PF1SV260A00N47 
E286470200ZZ 
FUEL-INJECTION PUMP
9 410 618 339 
NP-PF1SV260A00N48 
 
FUEL-INJECTION PUMP
F 01G 09Y 017 
NP-PF1SV260A00N49 
 

9 410 618 343 
NP-PF1SV260A00N50 
 
FUEL-INJECTION PUMP
9 410 618 375 
NP-PF1SV260A00N51 
 
FUEL-INJECTION PUMP
Back to top