104214-0000 ZEXEL 9 410 617 682 BOSCH FUEL-INJECTION PUMP 9410617682 1042140000

Information fuel-injection pump

BOSCH 9 410 617 682 9410617682

ZEXEL 104214-0000 1042140000

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 104214-0000 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104214-0000
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)	27.5{280}
10.	NOZZLE-HOLDER	105094-3042
11.	NOZZLE	105016-4450

Scheme ###:

5.	[1]	141171-0420	PLUNGER-AND-BARREL ASSY
7.	[1]	141106-8300	CAPSULE
8.	[1]	029331-2130	GASKET
12.	[1]	141110-5820	DELIVERY-VALVE ASSEMBLY
13.	[1]	141112-2000	COMPRESSION SPRING
16.	[1]	141115-4600	GASKET
17.	[1]	141126-2420	FITTING
20.	[1]	029635-0020	O-RING
50.	[1]	141215-2600	COMPRESSION SPRING
51.	[1]	141216-1800	SLOTTED WASHER
52.	[1]	141217-3000	SLOTTED WASHER
53.	[1]	141218-5020	GUIDE
55.	[1]	141220-1200	LOCKING WASHER
60.	[1]	141244-1600	CONTROL RACK
61.	[1]	141226-3200	BLEEDER SCREW
77.	[1]	141241-2700	CONTROL SLEEVE
81.	[1]	141245-2000	POINTER
82/1.	[0]	023500-6210	PLAIN WASHER D11&6.4T1.5
82/1.	[0]	029300-6010	PLAIN WASHER D11&6.4T0.8
82/1.	[0]	029300-6020	PLAIN WASHER D11&6.4T0.35
83.	[1]	020006-1440	BLEEDER SCREW M6P1L14
92.	[1]	029702-6060	INLET UNION
93.	[1]	029732-6010	EYE BOLT
94.	[2]	026526-3440	GASKET
94.	[2]	026526-3440	GASKET
100.	[1]	029762-6130	UNION NUT
101.	[1]	029351-7010	PLAIN WASHER
110.	[1]	140420-0600	BLEEDER SCREW
111.	[1]	026506-1040	GASKET D9.9&6.2T1

Include in #2:

104214-0000 as INJECTION-PUMP ASSEMBLY

105856-7750 as _

Cross reference number

Zexel num

Bosch num

Firm num

Name

104214-0000

9 410 617 682

FUEL-INJECTION PUMP
* K 24FA PF-1GD(V) PF

Information:

1. Remove oil supply tube (1) and suction bell and tube (2). 2. Remove bolts (3) that hold the oil pump to the cylinder block, and remove oil pump (4). The following steps are for installation of the oil pump.3. Put oil pump (4) in position on the cylinder block. Install the bolts that hold the oil pump to the cylinder block.4. Put clean engine oil on the O-ring seals of the tubes.5. Install oil supply tube (1) and suction bell and tube (2).End By:a. install oil panDisassemble Oil Pump
Start By:a. remove oil pump1. Remove the bolt and washer that hold the gear on the shaft. 2. Use tooling (A), and remove drive gear (1) from the shaft. Remove the key from the shaft. 3. Remove retainer (3) for the bypass valve.4. Remove the spring and bypass valve.5. Remove cover (2) from the pump body. 6. Use tooling (B), and remove the bearings from the cover. 7. Remove gears (5) and (6) from pump body (4).8. Use tooling (B), and remove the bearings from pump body (4).Assemble Oil Pump
1. Use tooling (B) to install the bearings in the pump body. Install the bearings so the joint in the bearings is 30° 15° from the center line of the oil pump outlet passage (7). 2. Install idler gear (5) and drive gear (6) in the oil pump body. Put clean engine oil on the bearings and the gears. 3. Use tooling (B), and install the bearings in cover (2). Install the bearings so the joint in the bearings is 30° 15° from the center line of the bearing bores toward oil pump outlet passage (7).4. Install bypass valve (8), spring (9) and the retainer.5. Install the key on the shaft. 6. Install gear (1) on the shaft. Install the washer and bolt that hold the gear on the shaft. Be sure the pump turns freely after assembly.End By:a. install oil pump