Information fuel-injection pump
BOSCH
F 01G 09Y 02E
f01g09y02e
ZEXEL
104130-4000
1041304000
KUBOTA
1G77751011
1g77751011
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Pump 1G777-51013 104130-4000 F01G09Y02E Compatible With Kubota V3307 Engine M6040 M7040 SVL75C Loader KX080-3S KX080-3T Excavator
HYUERI The ability to transfer fuel from the tank to the engine at a steady and efficient rate ensures that the engine always has enough fuel to maintain a strong power output. || Accurate pressure control can accurately control the fuel pressure, whether the vehicle is at idle, low speed or high-speed cruise and other different working conditions, can ensure that the fuel pressure meets the engine needs, optimize the combustion process. || With excellent reliability, greatly reduce the probability of failure, reduce the frequency of vehicle maintenance. || Fast start response, at the moment of vehicle start, can quickly establish the appropriate fuel pressure, to achieve rapid ignition start, improve the user's car convenience.
HYUERI The ability to transfer fuel from the tank to the engine at a steady and efficient rate ensures that the engine always has enough fuel to maintain a strong power output. || Accurate pressure control can accurately control the fuel pressure, whether the vehicle is at idle, low speed or high-speed cruise and other different working conditions, can ensure that the fuel pressure meets the engine needs, optimize the combustion process. || With excellent reliability, greatly reduce the probability of failure, reduce the frequency of vehicle maintenance. || Fast start response, at the moment of vehicle start, can quickly establish the appropriate fuel pressure, to achieve rapid ignition start, improve the user's car convenience.
Fuel Injection Pump Excavator Engine Replacement Parts.Compatible For Kubota M6040 M7040 KX080-3S 1G777-51013 104130-4000 F01G09Y02E
WWEIMNS OEM : 1G777-51013 104130-4000 F01G09Y02E || Adaptability: Fuel pumps have a wide range of adaptability and can be applied to different types of engines and fuel systems, meeting needs of various vehicles and providing better performance and driving experience. || Safety: fuel pump is equipped with various safety devices and protection mechanisms, such as overvoltage protection, overcurrent protection, etc., to ensure timely cut-off of fuel supply in abnormal situations and protect safety of vehicle and passengers. || Kind reminder: Before purchasing, please confirm that your shipping address is correct and that product and model you ordered are correct. After confirming that there are no errors, you can rest assured to purchase. If you have any questions, please send an email and our professional staff will solve them for you! || Team Objective: Our team has launched thousands of alternative products to provide customers with complete and efficient solutions. Providing customers with car components ha
WWEIMNS OEM : 1G777-51013 104130-4000 F01G09Y02E || Adaptability: Fuel pumps have a wide range of adaptability and can be applied to different types of engines and fuel systems, meeting needs of various vehicles and providing better performance and driving experience. || Safety: fuel pump is equipped with various safety devices and protection mechanisms, such as overvoltage protection, overcurrent protection, etc., to ensure timely cut-off of fuel supply in abnormal situations and protect safety of vehicle and passengers. || Kind reminder: Before purchasing, please confirm that your shipping address is correct and that product and model you ordered are correct. After confirming that there are no errors, you can rest assured to purchase. If you have any questions, please send an email and our professional staff will solve them for you! || Team Objective: Our team has launched thousands of alternative products to provide customers with complete and efficient solutions. Providing customers with car components ha
IMIFAFTAbT Fuel Injection Pump 1J730-51013 1J770-50540 1G777-51011 for Kubota V3307 V2607 V2607-CR V2607-CR-T Engine KX057-4 KX057-4CA U55-4 U55CA U48-4 R065 Excavator
IMIFAFTAbT Part Name:Fuel Injection Pump 1J730-51013 1J770-50540 1G777-51011 || Part Number:1J730-51013 1J770-50540 1G777-51011 || APPlication: Compatible with Kubota V3307 V2607 V2607-CR V2607-CR-T Engine KX057-4 KX057-4CA U55-4 U55CA U48-4 R065 Excavator || If you are not sure if the product is suitable please leave us a message and send us your original || product picture and part number and we will send the correct part after confirmation
IMIFAFTAbT Part Name:Fuel Injection Pump 1J730-51013 1J770-50540 1G777-51011 || Part Number:1J730-51013 1J770-50540 1G777-51011 || APPlication: Compatible with Kubota V3307 V2607 V2607-CR V2607-CR-T Engine KX057-4 KX057-4CA U55-4 U55CA U48-4 R065 Excavator || If you are not sure if the product is suitable please leave us a message and send us your original || product picture and part number and we will send the correct part after confirmation
Components :
| 0. | INJECTION-PUMP ASSEMBLY | 104130-4000 |
| 1. | _ | |
| 2. | FUEL INJECTION PUMP | |
| 3. | NUMBER PLATE | |
| 4. | _ | |
| 5. | CAPSULE | |
| 6. | ADJUSTING DEVICE | |
| 7. | NOZZLE AND HOLDER ASSY | |
| 8. | Nozzle and Holder | |
| 9. | Open Pre:MPa(Kqf/cm2) | |
| 10. | NOZZLE-HOLDER | |
| 11. | NOZZLE |
Scheme ###:
| 5. | [4] | 140171-0220 | PLUNGER-AND-BARREL ASSY KZ02 |
| 17. | [4] | 140137-0020 | PRESSURE-CONTROL VALVE |
| 20. | [4] | 140118-0301 | O-RING |
| 30. | [3] | 140131-1420 | FLANGE BUSHING |
| 31. | [1] | 140131-1620 | FLANGE BUSHING |
| 32. | [8] | 140118-0201 | O-RING |
| 37. | [8] | 140124-0400 | BLEEDER SCREW |
| 40. | [4] | 140200-3320 | TAPPET |
| 44. | [4] | 140212-0700 | BEARING PIN |
| 45. | [1] | 140213-1700 | LOCKING WASHER |
| 50. | [4] | 140215-2400 | COMPRESSION SPRING |
| 51. | [4] | 140216-0800 | SLOTTED WASHER |
| 52. | [4] | 140217-2200 | SLOTTED WASHER |
| 53/1. | [1] | 140296-4400 | PLATE T=3.50 |
| 53/1. | [1] | 140296-4500 | PLATE T=3.525 |
| 53/1. | [1] | 140296-4600 | PLATE T=3.55 |
| 53/1. | [1] | 140296-4700 | PLATE T=3.575 |
| 53/1. | [1] | 140296-4800 | PLATE T=3.60 |
| 53/1. | [1] | 140296-4900 | PLATE T=3.625 |
| 53/1. | [1] | 140296-5000 | PLATE T=3.65 |
| 53/1. | [1] | 140296-5100 | PLATE T=3.675 |
| 53/1. | [1] | 140296-5200 | PLATE T=3.70 |
| 53/1. | [1] | 140296-5300 | PLATE T=3.725 |
| 53/1. | [1] | 140296-5400 | PLATE T=3.75 |
| 53/1. | [1] | 140296-5500 | PLATE T=3.775 |
| 53/1. | [1] | 140296-5600 | PLATE T=3.80 |
| 53/1. | [1] | 140296-5700 | PLATE T=3.825 |
| 53/1. | [1] | 140296-5800 | PLATE T=3.85 |
| 53/1. | [1] | 140296-5900 | PLATE T=3.875 |
| 53/1. | [1] | 140296-6000 | PLATE T=3.90 |
| 53/1. | [1] | 140296-6100 | PLATE T=3.925 |
| 53/1. | [1] | 140296-6200 | PLATE T=3.95 |
| 53/1. | [1] | 140296-6300 | PLATE T=3.975 |
| 53/1. | [1] | 140296-6400 | PLATE T=4.00 |
| 60. | [1] | 140243-8420 | CONTROL RACK |
| 77. | [4] | 140241-4300 | CONTROL SLEEVE |
| 93. | [1] | 027412-2440 | EYE BOLT |
| 94. | [2] | 026512-1540 | GASKET |
| 112. | [1] | 140420-1400 | BLEEDER SCREW |
| 113. | [1] | 026508-1240 | GASKET D11.9&8.2T1.0 |
| 170. | [2] | 140445-0320 | PLATE |
| 171. | [1] | 140405-0400 | CAPSULE |
Include in #1:
108622-2160
as _
Include in #2:
104130-4000
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Introduction
This Special Instruction contains the necessary procedure in order to install unit injectors for 3114, 3116, and 3126 MUI engines.Removal and Installation Procedure
Note: To avoid damage to the unit injector during removal of the unit injector from the cylinder head, refer to the Service Manual for the removal procedure of the unit injector.Use the latest process for servicing the unit injector sleeves in the cylinder head before you install replacement unit injectors. Refer to the Service Manual and other service news articles in order to find the latest service information, including new tools and procedures.Before a new unit injector or a remanufactured unit injector is installed into an engine, take adequate precautions in order to clean the internal fuel lines and the unit injector sleeve. Also, install a new Caterpillar high efficiency fuel filter.Lubricate the injector rack bar with clean diesel fuel or 1U-8265 Penetrating Oil .
Illustration 1 g02144296
Incorrect testing procedure for the tappet springDo not depress the tappet spring. Refer to Illustration 1. Do not force the injector rack bar in and out since this action may damage the internal parts of the unit injector. A tight rack on a unit injector that is not installed in the engine is not an indication of a faulty unit injector. Forcing the injector rack bar in and out may cause the unit injector to become damaged. Forcing the injector rack bar in and out may possibly void all the warranty.Do not test the unit injectors prior to engine installation. The unit injectors are tested 100% at the factory and Pop Testing may contaminate the unit injector.Before you install the unit injector, apply clean engine oil on the O-ring seals for ease of installation.Install the unit injector according to the procedure in the Service Manual by using 173-1530 Injector Seating Tool . Tighten the unit injector clamp retaining bolt to a torque of 12 3 N m (9 2 lb ft).Verify the following parameters and settings according to the procedures in the Service Manual: unit injector synchronization, fuel setting, fuel timing and valve lash. Adjust the parameters and settings in order to meet specifications only.
This Special Instruction contains the necessary procedure in order to install unit injectors for 3114, 3116, and 3126 MUI engines.Removal and Installation Procedure
Note: To avoid damage to the unit injector during removal of the unit injector from the cylinder head, refer to the Service Manual for the removal procedure of the unit injector.Use the latest process for servicing the unit injector sleeves in the cylinder head before you install replacement unit injectors. Refer to the Service Manual and other service news articles in order to find the latest service information, including new tools and procedures.Before a new unit injector or a remanufactured unit injector is installed into an engine, take adequate precautions in order to clean the internal fuel lines and the unit injector sleeve. Also, install a new Caterpillar high efficiency fuel filter.Lubricate the injector rack bar with clean diesel fuel or 1U-8265 Penetrating Oil .
Illustration 1 g02144296
Incorrect testing procedure for the tappet springDo not depress the tappet spring. Refer to Illustration 1. Do not force the injector rack bar in and out since this action may damage the internal parts of the unit injector. A tight rack on a unit injector that is not installed in the engine is not an indication of a faulty unit injector. Forcing the injector rack bar in and out may cause the unit injector to become damaged. Forcing the injector rack bar in and out may possibly void all the warranty.Do not test the unit injectors prior to engine installation. The unit injectors are tested 100% at the factory and Pop Testing may contaminate the unit injector.Before you install the unit injector, apply clean engine oil on the O-ring seals for ease of installation.Install the unit injector according to the procedure in the Service Manual by using 173-1530 Injector Seating Tool . Tighten the unit injector clamp retaining bolt to a torque of 12 3 N m (9 2 lb ft).Verify the following parameters and settings according to the procedures in the Service Manual: unit injector synchronization, fuel setting, fuel timing and valve lash. Adjust the parameters and settings in order to meet specifications only.