103067-9101 ZEXEL 9 410 614 120 BOSCH FUEL-INJECTION PUMP 9410614120 1030679101


 

Information fuel-injection pump

BOSCH 9 410 614 120 9410614120
ZEXEL 103067-9101 1030679101
103067-9101 FUEL-INJECTION PUMP
Rating:
9
Buy FUEL-INJECTION PUMP 103067-9101 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1. [1] 133051-0020 PUMP HOUSING
1/30. [3] 029040-6020 STUD
1/35. [1] 132400-1000 ADAPTOR
1/40. [1] 131002-2000 ADAPTOR
1/40A. [1] 131002-2000 ADAPTOR
2. [1] 133010-4820 COVER
2/2. [1] 133011-1500 GASKET
3. [8] 020106-1240 BLEEDER SCREW M6P1.0L12
6. [4] 013020-6020 UNION NUT M6P1H5
6. [4] 013020-6020 UNION NUT M6P1H5
7. [1] 133021-0300 COVER
8. [2] 014110-6410 LOCKING WASHER
10. [2] 139006-0300 STUD
16. [6] 133034-0100 CAPSULE
20. [3] 014110-6440 LOCKING WASHER
21. [3] 013020-6040 UNION NUT M6P1H5
23. [1] 133041-0400 GASKET
24. [6] 029633-4010 O-RING
30. [6] 133101-8620 PLUNGER-AND-BARREL ASSY
31. [6] 133106-0500 CAPSULE
32. [6] 026510-1340 GASKET D13.4&10.2T1
36. [6] 133110-3020 DELIVERY-VALVE ASSEMBLY
37. [6] 134112-0500 COMPRESSION SPRING
40. [6] 133115-1400 GASKET D20.0&10.5T0.50
41. [6] 133116-4020 FITTING
42. [6] 029632-5030 O-RING
43. [6] 134117-0500 FILLER PIECE
45. [4] 133122-1420 PLATE
52. [6] 029632-0020 O-RING
55. [6] 133200-1120 TAPPET
55/2. [1] 133201-0101 UNION NUT
55/3. [1] 133202-0100 HEXAGON SCREW
55/4. [1] 133203-0400 BEARING PIN
55/5. [1] 133204-0300 ROLLER
55/6. [1] 133205-0300 BUSHING
57. [6] 133210-0300 FLAT-HEAD SCREW
58. [6] 026510-1340 GASKET D13.4&10.2T1
61. [6] 133215-0400 COMPRESSION SPRING
62. [6] 133216-0100 SLOTTED WASHER
63. [6] 133217-0300 SLOTTED WASHER
67. [1] 133256-2600 CONTROL RACK
68. [1] 133226-0600 FLAT-HEAD SCREW
69. [1] 023700-8120 TAB WASHER
76. [6] 133240-0100 PINION
77. [6] 133241-0200 CONTROL SLEEVE
78. [6] 131242-0100 FLAT-HEAD SCREW
90. [1] 133371-1900 CAMSHAFT
91. [1] 016603-3230 BEARING PLATE
91A. [1] 016603-3230 BEARING PLATE
92. [1] 133302-0200 SPACER RING
92A. [1] 133302-0200 SPACER RING
93/1. [0] 029313-0010 SHIM D45&30.2T0.1
93/1. [0] 029313-0020 SHIM D45&30.2T0.12
93/1. [0] 029313-0030 SHIM D45&30.2T0.14
93/1. [0] 029313-0040 SHIM D45&30.2T0.16
93/1. [0] 029313-0050 SHIM D45&30.2T0.18
93/1. [0] 029313-0060 SHIM D45&30.2T0.5
93/1. [0] 029313-0070 SHIM D45&30.2T1
93A/1. [0] 029313-0010 SHIM D45&30.2T0.1
93A/1. [0] 029313-0020 SHIM D45&30.2T0.12
93A/1. [0] 029313-0030 SHIM D45&30.2T0.14
93A/1. [0] 029313-0040 SHIM D45&30.2T0.16
93A/1. [0] 029313-0050 SHIM D45&30.2T0.18
93A/1. [0] 029313-0060 SHIM D45&30.2T0.5
93A/1. [0] 029313-0070 SHIM D45&30.2T1
95. [1] 133306-0200 BEARING SHELL
96. [2] 010208-4040 HEX-SOCKET-HEAD CAP SCREW
97. [2] 023500-8120 PLAIN WASHER
98. [2] 023650-8310 LOCKING WASHER
99. [2] 029630-9020 O-RING
100. [1] 029623-0010 PACKING RING
101. [1] 133316-2600 COVER
104. [6] 010208-2040 HEX-SOCKET-HEAD CAP SCREW
105. [6] 014110-8440 LOCKING WASHER
107. [1] 156635-9200 COUPLING PLATE
108. [1] 029637-6010 O-RING
110. [1] 023012-0040 UNION NUT M20P1.5H16
111. [1] 014112-0440 LOCKING WASHER
112. [1] 025806-2210 WOODRUFF KEY
117. [1] 029111-4040 CAPSULE
118. [1] 026514-1840 GASKET D17.9&14.2T1
130. [1] 029731-4680 EYE BOLT
130A. [1] 131424-1520 OVER FLOW VALVE
132. [2] 026514-1840 GASKET D17.9&14.2T1
132A. [2] 026514-1840 GASKET D17.9&14.2T1
156. [1] 029731-4680 EYE BOLT
158. [2] 029331-4230 GASKET
215. [1] 029731-0120 EYE BOLT
217. [2] 026510-1340 GASKET D13.4&10.2T1

Cross reference number

Zexel num
Bosch num
Firm num
Name
103067-9101 
9 410 614 120 
NP-PE6ZW150/320RS80 
   
FUEL-INJECTION PUMP
Q




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Batteries give off flammable fumes which can explode. Ensure there is proper ventilation for batteries which are located in an enclosure.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke when observing the battery electrolyte levels.Always wear protective glasses when working with batteries.Never disconnect any charging unit circuit or battery circuit cable from the battery when charging unit is operating. A spark can cause the flammable vapor mixture of hydrogen and oxygen to explode.Fire or Explosion Prevention
Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque. Leaks can cause fires.Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices (i.e. air inlet shutoff) suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable.Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes are extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Do not expose the engine to flames, burning brush, etc., if at all possible.Shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Provide adequate and proper waste oil disposal. Oil and fuel filters must be properly installed and housing covers tightened to proper torque when being changed.Batteries must be kept clean, covers kept on all cells, recommended cables and connections used and battery box covers kept in place when operating.When starting from an external source, always connect the positive (+) jumper cable to the POSITIVE (+) terminal of

Have questions with 103067-9101?





Group cross 103067-9101 ZEXEL

103067-9101  
9 410 614 120 
NP-PE6ZW150/320RS80 
 
FUEL-INJECTION PUMP
9 410 614 121 
NP-PE6ZW150/320LS80 
 
FUEL-INJECTION PUMP
Back to top