Information fuel-injection pump
BOSCH
9 410 613 100
9410613100
ZEXEL
103066-9310
1030669310

Rating:
Scheme ###:
1. | [1] | 133050-1420 | PUMP HOUSING |
1/30. | [3] | 029040-6020 | STUD |
1/35A. | [1] | 132400-0200 | ADAPTOR |
1/35A. | [1] | 132400-0200 | ADAPTOR |
2. | [1] | 133010-4320 | COVER |
2/2. | [1] | 133011-0100 | GASKET |
3. | [3] | 133017-0100 | FLAT-HEAD SCREW |
5. | [3] | 026508-1240 | GASKET D11.9&8.2T1 |
6. | [6] | 013020-6020 | UNION NUT M6P1H5 |
6. | [6] | 013020-6020 | UNION NUT M6P1H5 |
7. | [1] | 133021-0200 | COVER |
8. | [3] | 014110-6410 | LOCKING WASHER |
9. | [3] | 133023-0100 | CAP NUT |
15. | [1] | 132030-1220 | LEVEL INDICATOR |
16. | [6] | 133034-0100 | CAPSULE |
19. | [3] | 029300-6030 | PLAIN WASHER D11&6.4T0.5 |
20. | [3] | 014110-6410 | LOCKING WASHER |
21. | [3] | 013020-6020 | UNION NUT M6P1H5 |
22. | [1] | 133040-0100 | COVER |
23. | [1] | 133041-0400 | GASKET |
24. | [6] | 029334-0020 | GASKET |
30. | [6] | 133101-2720 | PLUNGER-AND-BARREL ASSY |
31. | [6] | 133106-0100 | CAPSULE |
32. | [6] | 029340-8020 | GASKET |
36. | [6] | 133110-0320 | DELIVERY-VALVE ASSEMBLY |
37. | [6] | 133112-0100 | COMPRESSION SPRING |
40. | [6] | 133115-0400 | GASKET |
41. | [6] | 133116-0200 | FITTING |
45. | [3] | 133122-1420 | PLATE |
55. | [6] | 133200-1120 | TAPPET |
55/2. | [1] | 133201-0101 | UNION NUT |
55/3. | [1] | 133202-0100 | HEXAGON SCREW |
55/4. | [1] | 133203-0400 | BEARING PIN |
55/5. | [1] | 133204-0300 | ROLLER |
55/6. | [1] | 133205-0300 | BUSHING |
57. | [6] | 133210-0100 | FLAT-HEAD SCREW |
58. | [6] | 026510-1340 | GASKET D13.4&10.2T1 |
61. | [6] | 133215-0100 | COMPRESSION SPRING |
62. | [6] | 133216-0100 | SLOTTED WASHER |
63. | [6] | 133217-0100 | SLOTTED WASHER |
67. | [1] | 133256-0100 | CONTROL RACK |
68. | [1] | 132226-0400 | FLAT-HEAD SCREW |
76. | [6] | 133240-0100 | PINION |
77. | [6] | 133241-0200 | CONTROL SLEEVE |
78. | [6] | 131242-0100 | FLAT-HEAD SCREW |
90. | [1] | 133371-0200 | CAMSHAFT |
91. | [1] | 028223-0010 | BEARING PLATE |
91A. | [1] | 028223-0010 | BEARING PLATE |
92. | [1] | 133302-0200 | SPACER RING |
92A. | [1] | 133302-0200 | SPACER RING |
93/1. | [0] | 029313-0010 | SHIM D45&30.2T0.1 |
93/1. | [0] | 029313-0020 | SHIM D45&30.2T0.12 |
93/1. | [0] | 029313-0030 | SHIM D45&30.2T0.14 |
93/1. | [0] | 029313-0040 | SHIM D45&30.2T0.16 |
93/1. | [0] | 029313-0050 | SHIM D45&30.2T0.18 |
93/1. | [0] | 029313-0060 | SHIM D45&30.2T0.5 |
93/1. | [0] | 029313-0070 | SHIM D45&30.2T1 |
93A/1. | [0] | 029313-0010 | SHIM D45&30.2T0.1 |
93A/1. | [0] | 029313-0020 | SHIM D45&30.2T0.12 |
93A/1. | [0] | 029313-0030 | SHIM D45&30.2T0.14 |
93A/1. | [0] | 029313-0040 | SHIM D45&30.2T0.16 |
93A/1. | [0] | 029313-0050 | SHIM D45&30.2T0.18 |
93A/1. | [0] | 029313-0060 | SHIM D45&30.2T0.5 |
93A/1. | [0] | 029313-0070 | SHIM D45&30.2T1 |
95. | [1] | 133305-0400 | BEARING SHELL |
96. | [2] | 010208-4040 | HEX-SOCKET-HEAD CAP SCREW |
97. | [2] | 026508-1240 | GASKET D11.9&8.2T1 |
100A. | [1] | 029622-5010 | PACKING RING |
100A. | [1] | 029622-5010 | PACKING RING |
101A. | [1] | 133316-0100 | COVER |
101A. | [1] | 133316-0100 | COVER |
104A. | [6] | 021108-1840 | FLAT-HEAD SCREW |
104A. | [6] | 021108-1840 | FLAT-HEAD SCREW |
105. | [6] | 014110-8440 | LOCKING WASHER |
105A. | [6] | 014110-8440 | LOCKING WASHER |
110A. | [1] | 023011-8020 | UNION NUT M18P1.5H15 |
110A. | [1] | 023011-8020 | UNION NUT M18P1.5H15 |
112A. | [1] | 025806-2210 | WOODRUFF KEY |
112A. | [1] | 025806-2210 | WOODRUFF KEY |
121. | [1] | 029111-0020 | CAPSULE |
122. | [1] | 026510-1340 | GASKET D13.4&10.2T1 |
130. | [1] | 133420-0520 | AIR FILTER |
130/2. | [1] | 029711-0280 | INLET UNION |
130/3. | [2] | 026510-1340 | GASKET D13.4&10.2T1 |
130/4. | [1] | 131420-0500 | BLEEDER SCREW |
130/5. | [1] | 133445-0100 | UNION NUT |
130/6. | [1] | 029630-6010 | O-RING |
130/7. | [1] | 133447-0100 | CLAMPING BAND |
130A. | [1] | 133420-0520 | AIR FILTER |
130A/2. | [1] | 029711-0280 | INLET UNION |
130A/3. | [2] | 026510-1340 | GASKET D13.4&10.2T1 |
130A/4. | [1] | 131420-0500 | BLEEDER SCREW |
130A/5. | [1] | 133445-0100 | UNION NUT |
130A/6. | [1] | 029630-6010 | O-RING |
130A/7. | [1] | 133447-0100 | CLAMPING BAND |
145. | [1] | 155406-0520 | AIR FILTER |
146. | [1] | 026512-1540 | GASKET D15.4&12.2T1.50 |
152. | [1] | 029731-0120 | EYE BOLT |
153. | [1] | 133442-0220 | PIPE |
154. | [2] | 026510-1340 | GASKET D13.4&10.2T1 |
156. | [1] | 029111-0040 | CAPSULE |
158. | [1] | 026510-1340 | GASKET D13.4&10.2T1 |
160. | [1] | 027418-3240 | EYE BOLT |
160A. | [1] | 131424-0820 | OVER FLOW VALVE |
162. | [2] | 026518-2240 | GASKET D21.9&18.2T1 |
162A. | [2] | 026514-1840 | GASKET D17.9&14.2T1 |
Cross reference number
Zexel num
Bosch num
Firm num
Name
103066-9310
9 410 613 100
FUEL-INJECTION PUMP
* Q
* Q
Information:
Safety is everyone's business and is basically the use of good common sense. A general guide of safety precautions are given below, but each installation has its own peculiarities which cannot always be predicted and covered by established rules. Past experience and common sense are needed for the necessary safety measures. Attention to safety will help avoid serious accidents. Be alert. Watch for hazards. Use preventive measures. Correct deficiencies immediately.The following safety precautions are a general guide to safe operation:1. To prevent personal injury, install guards over all exposed rotating parts.2. To prevent hearing damage, wear ear protective devices if working inside an enclosed engine room with engine running.3. To prevent head injury, wear safety hat when working in the area of overhead equipment.4. Wear safety glasses and shoes as required. 5. Do not wear loose clothing whenever working around engines or machinery.6. Wipe up spilled oil, fuel or coolant.7. Keep batteries in a well ventilated area. Do not smoke around batteries. Hydrogen gas, which is present in the area of the batteries, is highly explosive.8. Provide adequate and safe waste oil disposal.9. Store oily rags in fireproof containers. Don't leave rags on engine.
When using pressure air, wear safety glasses and protective clothing. Maximum air pressure, used for cleaning, must be below 30 PSI (2 kg/cm2).
10. Remove all tools, electrical cords and other loose items from the engine before starting.11. Disconnect and tape the battery ground lead before working on an engine to prevent accidental starting. Be sure an automatic start-stop system cannot operate and start the engine while working on it.12. Do not attempt repairs you do not understand. Follow instructions.13. Stop engine before adjusting or repairing engine or driven equipment.14. Remove radiator cap slowly. Cooling systems can be pressurized and hot fluid will flash to steam as pressure is removed.15. Never start an engine with the governor linkage disconnected.16. Replace or repair broken or damaged equipment. Use proper tools.17. Do not smoke while refueling. Observe NO SMOKING signs.18. Never store flammable liquids near the engine.19. All electrical equipment must be grounded according to local building codes.20. Check all connections periodically for tightness and insulation.21. Insulate all connections and disconnected wires.22. Do not use carbon tetrachloride fire extinguishers. Fumes are toxic and the liquid has a deteriorating effect on insulation. 23. Do not touch the heat sink on the generator regulator when the generator is running. It is electrically "hot".24. Do not work on electrically "hot" equipment.25. Always disconnect the engine starter circuit when working on the generator.26. Hot engine oil can cause burns when drained. Allow the oil to cool below 140°F or provide protection when draining the hot oil.27. Never remove a plug to check pressure with the engine running. Shut down the engine and assure there is no pressure before removing plug.28. When starting an engine after repair, make provisions for shutting off air supply in case there is an overspeed on start up.29. Never look into an open cylinder port and turn over
When using pressure air, wear safety glasses and protective clothing. Maximum air pressure, used for cleaning, must be below 30 PSI (2 kg/cm2).
10. Remove all tools, electrical cords and other loose items from the engine before starting.11. Disconnect and tape the battery ground lead before working on an engine to prevent accidental starting. Be sure an automatic start-stop system cannot operate and start the engine while working on it.12. Do not attempt repairs you do not understand. Follow instructions.13. Stop engine before adjusting or repairing engine or driven equipment.14. Remove radiator cap slowly. Cooling systems can be pressurized and hot fluid will flash to steam as pressure is removed.15. Never start an engine with the governor linkage disconnected.16. Replace or repair broken or damaged equipment. Use proper tools.17. Do not smoke while refueling. Observe NO SMOKING signs.18. Never store flammable liquids near the engine.19. All electrical equipment must be grounded according to local building codes.20. Check all connections periodically for tightness and insulation.21. Insulate all connections and disconnected wires.22. Do not use carbon tetrachloride fire extinguishers. Fumes are toxic and the liquid has a deteriorating effect on insulation. 23. Do not touch the heat sink on the generator regulator when the generator is running. It is electrically "hot".24. Do not work on electrically "hot" equipment.25. Always disconnect the engine starter circuit when working on the generator.26. Hot engine oil can cause burns when drained. Allow the oil to cool below 140°F or provide protection when draining the hot oil.27. Never remove a plug to check pressure with the engine running. Shut down the engine and assure there is no pressure before removing plug.28. When starting an engine after repair, make provisions for shutting off air supply in case there is an overspeed on start up.29. Never look into an open cylinder port and turn over
Have questions with 103066-9310?
Group cross 103066-9310 ZEXEL
103066-9310
9 410 613 100
FUEL-INJECTION PUMP