101065-0060 ZEXEL 9 410 610 969 BOSCH FUEL-INJECTION PUMP 9410610969 1010650060

Information fuel-injection pump

BOSCH 9 410 610 969 9410610969

ZEXEL 101065-0060 1010650060

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 101065-0060 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	131070-0920	PUMP HOUSING
1/30.	[3]	029040-6020	STUD
1/35.	[1]	131400-0100	ADAPTOR
1/40A.	[1]	131420-0420	BLEEDER SCREW
2.	[1]	131013-5120	COVER
3.	[2]	131017-1000	FLAT-HEAD SCREW
5.	[2]	029340-6020	GASKET D10&6.5T1.00
15.	[1]	131029-4920	LEVEL INDICATOR
16.	[6]	131034-1401	CAPSULE
21.	[3]	139206-0400	UNION NUT
23.	[1]	029633-1010	O-RING
30.	[6]	131101-8120	PLUNGER-AND-BARREL ASSY
36.	[6]	131110-0320	DELIVERY-VALVE ASSEMBLY
37.	[6]	131112-0600	COILED SPRING
40.	[6]	131115-0200	GASKET
41.	[6]	131116-0400	FITTING
45.	[3]	131122-0520	PLATE
55.	[6]	131200-0620	TAPPET
55/2.	[1]	131201-0100	UNION NUT
55/3.	[1]	131202-0100	HEXAGON SCREW
55/4.	[1]	131203-0200	BEARING PIN
55/5.	[1]	131204-1000	ROLLER
55/6.	[1]	131205-0500	BUSHING
55/7.	[1]	131206-0200	SLIDER
61.	[6]	131215-0600	COMPRESSION SPRING
62.	[6]	131216-0100	SLOTTED WASHER
63.	[6]	131217-0100	SLOTTED WASHER
67.	[1]	131256-0000	CONTROL RACK
68.	[1]	131226-0300	FLAT-HEAD SCREW
76.	[6]	131240-0100	PINION
77.	[6]	131241-0100	CONTROL SLEEVE
78.	[6]	131242-0100	FLAT-HEAD SCREW
90.	[1]	131370-0200	CAMSHAFT
91.	[1]	016630-2640	BEARING PLATE
91A.	[1]	028001-7010	BEARING PLATE
92.	[1]	131302-0400	SPACER RING
92A.	[1]	131302-0600	SPACER RING
93/1.	[0]	029311-7010	SHIM D22&17T0.1
93/1.	[0]	029311-7020	SHIM D22&17T0.12
93/1.	[0]	029311-7030	SHIM D22&17T0.14
93/1.	[0]	029311-7040	SHIM D22&17T0.16
93/1.	[0]	029311-7050	SHIM D22&17T0.18
93/1.	[0]	029311-7060	SHIM D22&17T0.5
93/1.	[0]	029311-7070	SHIM D22&17T1.0
93/1.	[0]	029311-7090	SHIM D22&17T0.3
93/1.	[0]	029311-7210	SHIM D22&17T0.7
93/1.	[0]	029311-7220	SHIM D22&17T1.4
93/1.	[0]	139417-0000	SHIM D22&17T2.4
93A/1.	[0]	029311-7010	SHIM D22&17T0.1
93A/1.	[0]	029311-7020	SHIM D22&17T0.12
93A/1.	[0]	029311-7030	SHIM D22&17T0.14
93A/1.	[0]	029311-7040	SHIM D22&17T0.16
93A/1.	[0]	029311-7050	SHIM D22&17T0.18
93A/1.	[0]	029311-7060	SHIM D22&17T0.5
93A/1.	[0]	029311-7070	SHIM D22&17T1.0
93A/1.	[0]	029311-7090	SHIM D22&17T0.3
93A/1.	[0]	029311-7210	SHIM D22&17T0.7
93A/1.	[0]	029311-7220	SHIM D22&17T1.4
93A/1.	[0]	139417-0000	SHIM D22&17T2.4
95.	[1]	131306-0800	BEARING SHELL
96.	[2]	029050-5010	FLAT-HEAD SCREW M5P0.8L32
97.	[2]	026505-0940	GASKET
100.	[1]	029621-7020	PACKING RING
101.	[1]	131330-2300	COVER
104.	[4]	020006-1440	BLEEDER SCREW M6P1L14
106.	[1]	029634-4020	O-RING
107.	[1]	156612-4300	COUPLING PLATE
110.	[1]	013021-2140	UNION NUT M12P1.75H10
111.	[1]	023641-2410	LOCKING WASHER
112.	[1]	025803-1610	WOODRUFF KEY
117.	[1]	029731-4080	EYE BOLT
118.	[2]	139514-0300	GASKET
121.	[1]	131400-0800	CAPSULE
122.	[1]	139510-0300	GASKET
145.	[1]	155406-0220	AIR FILTER
152.	[1]	029731-0470	EYE BOLT
153.	[1]	029711-0080	INLET UNION
154.	[2]	029341-0020	GASKET

Include in #1:

101601-5701 as _

101652-2080 as FUEL INJECTION PUMP

Cross reference number

Zexel num

Bosch num

Firm num

Name

101065-0060

9 410 610 969

FUEL-INJECTION PUMP
* Q

Information:

Test Procedure
System Operation
An energized input closes the N.O. contacts. An energized input opens the N.C. contacts. Digital modules are used to determine whether a circuit is ON/OFF. A number of modules are available. The most common modules have sixteen channels.
Illustration 1 g00563503
Diagram of the programmable logic controller
Illustration 2 g00563591
Schematic of the discrete inputFunctional Test
Check the electrical connectors and check the wiring.
Bodily contact with electrical potential can cause bodily injury or death.To avoid the possibility of injury or death, ensure that the main power supply has been disconnected before performing any maintenance or removing any modules.
Disconnect the power supply.
Check the electrical connectors and check the wiring for damage or bad connections.
Verify that all modules are properly seated.
Verify the status of the LED on the SLC 5/04.The results of the preceding procedure are in the following list:
All of the components are fully installed. All of the components are free of corrosion. All of the components are free of damage. All of the modules are properly seated. Proceed to 2.
The components are not fully installed. The components are not free of corrosion. The components are damaged. All of the modules are not properly seated. Repair the component. Verify that the repair resolves the problem. STOP.
Verify the value of the channel.
Get on-line with the PLC.
Locate the software address for the channel.The results of the preceding procedure are in the following list:
The channel has a software address. Proceed to 3.
The channel does not have a software address. Replace the module. Verify that the repair resolves the problem. Refer to Maintenance Procedure, "Input Module and Output Module - Replace". Stop.
Apply the rated voltage.
Apply the rated voltage to the channel.
Verify that the address changed from zero to one.Note: The LED will illuminate when the rated voltage is applied to the channel.The results of the preceding procedure are in the following list:
The software address value changes. The module is functioning normally. Stop.
The software address value does not change. the module is not functioning normally. Replace the module. Verify that the repair resolves the problem. Refer to Maintenance Procedure, "Input Module and Output Module - Replace". Stop.