101062-9370 ZEXEL 9 410 614 094 BOSCH FUEL-INJECTION PUMP 9410614094 1010629370

Information fuel-injection pump

BOSCH 9 410 614 094 9410614094

ZEXEL 101062-9370 1010629370

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 101062-9370 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	131073-9320	PUMP HOUSING
1/30.	[3]	029040-6020	STUD
1/35.	[1]	134026-0000	CAPSULE
1/40.	[1]	131002-2000	ADAPTOR
1/40A.	[1]	131002-2000	ADAPTOR
2.	[1]	131028-6020	COVER
2/2.	[1]	131011-0800	GASKET
3.	[2]	131017-1000	FLAT-HEAD SCREW
5.	[2]	029340-6020	GASKET D10&6.5T1.00
16.	[6]	131034-1401	CAPSULE
20.	[3]	014110-6440	LOCKING WASHER
21.	[3]	013020-6040	UNION NUT M6P1H5
22.	[1]	131040-0200	COVER
23.	[1]	131041-0800	GASKET
30.	[6]	131154-6520	PLUNGER-AND-BARREL ASSY
36.	[6]	131110-7720	DELIVERY-VALVE ASSEMBLY
37.	[6]	131112-5600	COMPRESSION SPRING
40.	[6]	131115-1600	GASKET
41.	[6]	131116-8420	FITTING
42.	[6]	131117-3100	FILLER PIECE
45.	[3]	131122-0520	PLATE
49.	[6]	029632-0030	O-RING
55.	[6]	131200-2820	TAPPET
55/2.	[1]	131203-0800	BEARING PIN
55/3.	[1]	131204-1000	ROLLER
55/4.	[1]	131205-0500	BUSHING
55/5.	[1]	131206-0200	SLIDER
56/1.	[0]	029311-0020	SHIM D19&10T0.30
56/1.	[0]	029311-0030	SHIM D19&10T0.40
56/1.	[0]	029311-0040	SHIM D19&10T0.50
56/1.	[0]	029311-0050	SHIM D19&10T0.6
56/1.	[0]	029311-0060	SHIM D19&10T0.7
56/1.	[0]	029311-0070	SHIM D19&10T0.8
56/1.	[0]	029311-0080	SHIM D19&10T0.9
56/1.	[0]	029311-0090	SHIM D19&10T1
56/1.	[0]	029311-0110	SHIM D19&10T1.1
56/1.	[0]	029311-0120	SHIM D19&10T1.2
56/1.	[0]	029311-0130	SHIM D19&10T1.3
56/1.	[0]	029311-0140	SHIM D19&10T1.4
56/1.	[0]	029311-0270	SHIM D19&10T0.55
56/1.	[0]	029311-0280	SHIM D19&10T0.65
56/1.	[0]	029311-0290	SHIM D19&10T0.75
56/1.	[0]	029311-0310	SHIM D19&10T0.85
56/1.	[0]	029311-0320	SHIM D19&10T0.95
56/1.	[0]	029311-0330	SHIM D19&10T1.05
56/1.	[0]	029311-0340	SHIM D19&10T1.15
56/1.	[0]	029311-0350	SHIM D19&10T1.25
56/1.	[0]	029311-0490	SHIM D19&10T1.5
56/1.	[0]	029311-0500	SHIM D19&10T1.6
56/1.	[0]	029311-0580	SHIM D19&10T0.2
56/1.	[0]	029311-0590	SHIM D19&10T0.25
56/1.	[0]	029311-0600	SHIM D19&10T0.35
56/1.	[0]	029311-0610	SHIM D19&10T0.45
56/1.	[0]	029311-0620	SHIM D19&10T1.35
56/1.	[0]	029311-0630	SHIM D19&10T1.45
56/1.	[0]	029311-0710	SHIM D19&10T1.55
61.	[6]	131215-2500	COMPRESSION SPRING
62.	[6]	131216-0100	SLOTTED WASHER
63.	[6]	131217-0200	SLOTTED WASHER
67.	[1]	131256-0900	CONTROL RACK
68.	[1]	131226-0300	FLAT-HEAD SCREW
76.	[6]	131240-0100	PINION
77.	[6]	131241-0100	CONTROL SLEEVE
78.	[6]	131242-0100	FLAT-HEAD SCREW
90.	[1]	131371-4900	CAMSHAFT
91A.	[1]	016630-2030	BEARING PLATE
91B.	[1]	028201-7020	BEARING PLATE
91E.	[1]	016640-2030	BEARING PLATE
91F.	[1]	028202-0020	BEARING PLATE
92.	[1]	131302-1301	SPACER RING
92A.	[1]	131302-1700	SPACER RING
93/1.	[0]	029312-0310	SHIM D24&20T0.10
93/1.	[0]	029312-0320	SHIM D24&20T0.12
93/1.	[0]	029312-0330	SHIM D24&20T0.14
93/1.	[0]	029312-0340	SHIM D24&20T0.16
93/1.	[0]	029312-0350	SHIM D24&20T0.18
93/1.	[0]	029312-0360	SHIM D24&20T0.3
93/1.	[0]	029312-0370	SHIM D24&20T0.5
93/1.	[0]	029312-0380	SHIM D24&20T1.0
93A/1.	[0]	029311-7010	SHIM D22&17T0.1
93A/1.	[0]	029311-7020	SHIM D22&17T0.12
93A/1.	[0]	029311-7030	SHIM D22&17T0.14
93A/1.	[0]	029311-7040	SHIM D22&17T0.16
93A/1.	[0]	029311-7050	SHIM D22&17T0.18
93A/1.	[0]	029311-7060	SHIM D22&17T0.5
93A/1.	[0]	029311-7070	SHIM D22&17T1.0
93A/1.	[0]	029311-7090	SHIM D22&17T0.3
93A/1.	[0]	029311-7210	SHIM D22&17T0.7
93A/1.	[0]	029311-7220	SHIM D22&17T1.4
93A/1.	[0]	139417-0000	SHIM D22&17T2.4
95.	[1]	131306-1000	BEARING SHELL
96.	[2]	029050-5010	FLAT-HEAD SCREW M5P0.8L32
97.	[2]	026505-0940	GASKET
100.	[1]	029622-0190	PACKING RING
101.	[1]	131330-6400	COVER
104.	[4]	029010-6810	BLEEDER SCREW
106.	[1]	131321-1900	GASKET
131.	[1]	131424-3420	OVER FLOW VALVE
131A.	[1]	131401-0020	EYE BOLT
133.	[2]	029341-4130	GASKET D20&13.8T2*
133A.	[2]	029341-4130	GASKET D20&13.8T2*
192.	[1]	029637-5030	O-RING
334.	[1]	029731-0120	EYE BOLT
336.	[2]	029341-0110	GASKET

Include in #1:

101600-3081 as FUEL INJECTION PUMP

101600-3090

106672-3473 as _

Cross reference number

Zexel num

Bosch num

Firm num

Name

101062-9370

9 410 614 094
NP-PES6A95C120RS2000

FUEL-INJECTION PUMP
Q

Information:

Close the gauge protector valve ( 0 to 40,000 kPa (0 to 5,800 psi) gauge).
Visually inspect the pattern of the fuel nozzle for a uniform spray.Note: For this test, each full stroke of the pump should be performed in less than one second.
Rapidly increase the pressure on the fuel nozzle until fluid sprays from the tip of the fuel nozzle.
Test fluid should spray from the tip of the nozzle in a pattern that is uniform. Refer to Illustration 2.
Check the individual spray orifices for partial plugging.
Use a moderate pump stroke to open the valve of the fuel nozzle.
During the pump stroke, view the individual spray orifices for partial plugging.The test fluid should spray uniformly from all the orifices.If an orifice is plugged or the pattern is distorted, clean the fuel nozzle orifices and repeat this test. Refer to Special Instruction, SEHS8627, "Use of 8S-2245 Nozzle Cleaning Tool Group" for instructions on tool usage and cleaning procedures.Test the Fuel Nozzle for Seal Leakage
Note: Testing for seal leakage is not a requirement for the 104-9450 Fuel Nozzle, 104-9452 Fuel Nozzle, 104-9453 Fuel Nozzle, or the 104-9454 Fuel Nozzle. Do not perform this test on these fuel nozzles.
Illustration 3 g00453789
Typical example of a 7000 Series fuel nozzle
Remove the cloth from the top of the nozzle.
Prior to performing this test, install a new seal washer on purging screw (A) and reinstall the purging screw into the fuel nozzle.
Illustration 4 g00453809
Tighten purging screw (D) or purging screw (E) to a torque of 2.2 0.8 N m (20 7 lb in). Note: Use a 6V-4980 Torque Screwdriver Tool Group to torque the purging screw.
Apply a test pressure of 13,800 kPa (2,000 psi) to the fuel nozzle.Note: Due to the large amount of test fluid that is delivered to the fuel nozzle, hydraulic lock may prevent the nozzle from opening during this test. If a hydraulic lock occurs, slowly loosen the adapter fitting to relieve the pressure on the fuel nozzle valve assembly.If there is leakage at the purging screw, install a new 8C-3234 Screw and a 114-3364 Washer as replacement parts. Retest the fuel nozzle for leaks.Do not use the nozzle if there is leakage that cannot be repaired at purging screw (A), upper seal joint (B), or lower seal joint (C).Returning Fuel Nozzles to Service
Illustration 5 g00453817Prior to returning fuel nozzles to service, install a new seal washer (3) and install a new carbon dam (4) on the fuel nozzle (1).Use 6V-4979 Carbon Seal Installation Tool (2) to install a new carbon dam (4).Table 5 contains part numbers for the replacement of the fuel nozzle seal washers.
Table 5
Seal Washers
Fuel Nozzle Washer (Color) Washer Thickness
8N-7004 4W-3914 (Gray) 1.27 mm (0.050 inch)
4W-7012
4W-7013
4W-7014
4W-7015 4W-6060 (Blue) 3.18 mm (0.125 inch)
4W-7018
4W-7019
4W-7020
4W-7021
4W-7022
7W-7045
100-7552
100-7562
100-7563
104-3377
167-7489
170-5181
170-5183 7W-4482 (Green) 3.18 mm (0.125 inch)
133-3896 7W-4483 (Red) 2.54 mm (0.100 inch)
4W-7011
4W-7016
7W-7024 7W-4485 (Copper) 1.27 mm (0.050 inch)
8N-7003
7W-7038
8N-7005
100-7559
100-7561
100-7564
104-9450
104-9452
104-9453
104-9454
131-3190
154-3198
170-5187 7W-4486 (Violet) 1.84 mm (0.072 inch)
4W-7017
7W-7026
7W-7030
7W-7031
7W-7032
7W-7033
7W-7035
7W-7037
7W-7040
7W-7041
7W-7042
7W-7043
7W-7044
8N-7007
100-7550
100-7551
100-7556
100-7557
100-7558
100-7560
100-7565
100-7567
100-7600
121-4353
127-9792
127-9793
129-1351
130-1804
130-1806
130-5187
130-5190
131-0811
131-0812
131-1242
131-1243
131-7937
134-0944
171-4093 7W-4487 (Black) 1.27 mm (0.050 inch)
7W-7023