101061-9430 ZEXEL 9 410 611 911 BOSCH FUEL-INJECTION PUMP 9410611911 1010619430 16703z5666

Information fuel-injection pump

BOSCH 9 410 611 911 9410611911

ZEXEL 101061-9430 1010619430

NISSAN-DIESEL 16703Z5666 16703z5666

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 101061-9430 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	131073-7320	PUMP HOUSING
1/30.	[3]	029040-6020	STUD
1/35.	[1]	131400-0100	ADAPTOR
1/40A.	[1]	131002-2000	ADAPTOR
2.	[1]	131028-6020	COVER
2/2.	[1]	131011-0800	GASKET
3.	[2]	131017-1000	FLAT-HEAD SCREW
5.	[2]	029340-6020	GASKET D10&6.5T1.00
16.	[6]	131034-1401	CAPSULE
21.	[3]	139206-0400	UNION NUT
23.	[1]	029633-1010	O-RING
30.	[6]	131152-1120	PLUNGER-AND-BARREL ASSY
36.	[6]	131110-6820	DELIVERY-VALVE ASSEMBLY
37.	[6]	131112-4300	COMPRESSION SPRING
40.	[6]	131115-1600	GASKET
41.	[6]	131116-7600	FITTING
42.	[6]	131117-2300	FILLER PIECE
45.	[3]	131122-0520	PLATE
49.	[6]	029632-0030	O-RING
55.	[6]	131200-0220	TAPPET
55/2.	[1]	131203-0200	BEARING PIN
55/3.	[1]	131204-1000	ROLLER
55/4.	[1]	131205-0500	BUSHING
55/5.	[1]	131206-0200	SLIDER
56/1.	[0]	029311-0020	SHIM D19&10T0.30
56/1.	[0]	029311-0030	SHIM D19&10T0.40
56/1.	[0]	029311-0040	SHIM D19&10T0.50
56/1.	[0]	029311-0050	SHIM D19&10T0.6
56/1.	[0]	029311-0060	SHIM D19&10T0.7
56/1.	[0]	029311-0070	SHIM D19&10T0.8
56/1.	[0]	029311-0080	SHIM D19&10T0.9
56/1.	[0]	029311-0090	SHIM D19&10T1
56/1.	[0]	029311-0110	SHIM D19&10T1.1
56/1.	[0]	029311-0120	SHIM D19&10T1.2
56/1.	[0]	029311-0130	SHIM D19&10T1.3
56/1.	[0]	029311-0140	SHIM D19&10T1.4
56/1.	[0]	029311-0270	SHIM D19&10T0.55
56/1.	[0]	029311-0280	SHIM D19&10T0.65
56/1.	[0]	029311-0290	SHIM D19&10T0.75
56/1.	[0]	029311-0310	SHIM D19&10T0.85
56/1.	[0]	029311-0320	SHIM D19&10T0.95
56/1.	[0]	029311-0330	SHIM D19&10T1.05
56/1.	[0]	029311-0340	SHIM D19&10T1.15
56/1.	[0]	029311-0350	SHIM D19&10T1.25
56/1.	[0]	029311-0490	SHIM D19&10T1.5
56/1.	[0]	029311-0500	SHIM D19&10T1.6
56/1.	[0]	029311-0580	SHIM D19&10T0.2
56/1.	[0]	029311-0590	SHIM D19&10T0.25
56/1.	[0]	029311-0600	SHIM D19&10T0.35
56/1.	[0]	029311-0610	SHIM D19&10T0.45
56/1.	[0]	029311-0620	SHIM D19&10T1.35
56/1.	[0]	029311-0630	SHIM D19&10T1.45
56/1.	[0]	029311-0710	SHIM D19&10T1.55
61.	[6]	131215-2500	COMPRESSION SPRING
62.	[6]	131216-0100	SLOTTED WASHER
63.	[6]	131217-0200	SLOTTED WASHER
67.	[1]	131256-0000	CONTROL RACK
68.	[1]	131226-0300	FLAT-HEAD SCREW
76.	[6]	131240-0100	PINION
77.	[6]	131241-0100	CONTROL SLEEVE
78.	[6]	131242-0100	FLAT-HEAD SCREW
90.	[1]	131371-2200	CAMSHAFT
91A.	[1]	016630-2030	BEARING PLATE
91B.	[1]	028201-7020	BEARING PLATE
91E.	[1]	016640-2030	BEARING PLATE
91F.	[1]	028202-0020	BEARING PLATE
92.	[1]	131302-1300	SPACER RING
92A.	[1]	131302-0300	SPACER RING
93/1.	[0]	029312-0220	SHIM D27&20T0.1
93/1.	[0]	029312-0230	SHIM D27&20T0.12
93/1.	[0]	029312-0240	SHIM D27&20T0.14
93/1.	[0]	029312-0250	SHIM D27&20T0.16
93/1.	[0]	029312-0260	SHIM D27&20T0.18
93/1.	[0]	029312-0270	SHIM D27&20T0.5
93/1.	[0]	029312-0290	SHIM D27&20T0.3
93/1.	[0]	029312-0300	SHIM D27&20T1.0
93/1.	[0]	139420-0400	SHIM D27&20T0.7
93A/1.	[0]	029311-7010	SHIM D22&17T0.1
93A/1.	[0]	029311-7020	SHIM D22&17T0.12
93A/1.	[0]	029311-7030	SHIM D22&17T0.14
93A/1.	[0]	029311-7040	SHIM D22&17T0.16
93A/1.	[0]	029311-7050	SHIM D22&17T0.18
93A/1.	[0]	029311-7060	SHIM D22&17T0.5
93A/1.	[0]	029311-7070	SHIM D22&17T1.0
93A/1.	[0]	029311-7090	SHIM D22&17T0.3
93A/1.	[0]	029311-7210	SHIM D22&17T0.7
93A/1.	[0]	029311-7220	SHIM D22&17T1.4
93A/1.	[0]	139417-0000	SHIM D22&17T2.4
95.	[1]	131306-0800	BEARING SHELL
96.	[2]	029050-5010	FLAT-HEAD SCREW M5P0.8L32
97.	[2]	026505-0940	GASKET
100.	[1]	029622-0190	PACKING RING
101.	[1]	131330-1800	COVER
104.	[4]	020006-2040	BLEEDER SCREW M6P1L20 4T
106.	[1]	131321-1900	GASKET
112.	[1]	025803-1610	WOODRUFF KEY
117.	[1]	029731-4080	EYE BOLT
131A.	[1]	131424-1520	OVER FLOW VALVE
191.	[1]	131460-0920	BRACKET
191/2.	[4]	029041-0010	STUD
192.	[1]	029637-5020	O-RING &73.5W2
194.	[4]	014011-0140	PLAIN WASHER D22&10.5T1.6
195.	[4]	014111-0440	LOCKING WASHER
196.	[4]	131465-0000	UNION NUT
334.	[1]	029731-0120	EYE BOLT

Include in #1:

101601-2930 as _

101602-9830 as FUEL INJECTION PUMP

101602-9900

101606-9080

101606-9410

Cross reference number

Zexel num

Bosch num

Firm num

Name

101061-9430

9 410 611 911
NP-PES6A95C320RS2000

16703Z5666 NISSAN-DIESEL

FUEL-INJECTION PUMP
Q

Information:

Illustration 62 g02807941
Remove the plug
Remove plug (2) .
Illustration 63 g02807956
Set speed by turning adjusting screw
Adjust speed. If Ng exceeds TMI specifications, tighten the adjusting screw. If Ng is less than the specified value, loosen the adjusting screw.
Illustration 64 g02807957
Adjust the maximum-speed stopper bolt
Adjust the maximum-speed stopper bolt until the speed at the start of high-speed control is Nf.
Check that the no-load maximum speed is Ng (described in Step 1). Continue adjustment until the specified value is obtained.
Illustration 65 g02807958
Increase pump speed to make sure that the control rack position reaches Ra.
Illustration 66 g02807959
Full-load Adjustment
Illustration 67 g02807997
Install the cover and adjust full-load stopper bolt
Install cover (3) on governor using bolts and lockwashers (2). Use caution when installing the cover to make sure that the O-ring seal is in the seal groove.
Illustration 68 g02807999
Position the control lever at maximum-speed position.
Adjust full-load stopper bolt (1) to the f"ull-load fuel injection quantity" position. See TMI for the specifications (Point A).
Install cap.Control Lever Angle Measurement
Illustration 69 g02808016
Measuring control lever angle at the "full-speed" and "idling" positions.
Measuring the control lever angle at the "idling" and "full" positions.
If the angle is not as specified by TMI, replace the shifters shim. If the control lever is positioned toward the "full" position, replace the shifters shim with a thicker one. When control lever is toward the "idling" position, replace the shim with a thinner one.Check Starting Delivery
Illustration 70 g02808018
Remove measurement adapter
Remove measurement adapter (1) .
Illustration 71 g02808038
Cap must be installed to check delivery rate
Install cap (2) .
Run pump at speed specified in TMI.
Check delivery rate with specifications listed in TMI.
Stop pump rotation.
Illustration 72 g02808058
Adjusting screw for setting fuel flow
If delivery rate does not meet TMI specifications, remove cap (2), loosen lock nut, and adjust screw (3). Adjusting screw outward decreases fuel flow and inward increases fuel flow.
Install cap (2) and recheck delivery rate. Repeat Steps 2 through 6 until delivery rate is at specified value.Lockwiring Caps of Adjustment Screws
All adjustment stops (screws) that directly affect engine performance should be lockwired after adjustment. Do not readjust any stop without using the test stand can adversely affect the engine and engine performance.