101061-8851 ZEXEL 9 410 610 345 BOSCH FUEL-INJECTION PUMP 9410610345 1010618851 me740878

Information fuel-injection pump

BOSCH 9 410 610 345 9410610345

ZEXEL 101061-8851 1010618851

MITSUBISHI ME740878 me740878

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 101061-8851 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	131076-8820	PUMP HOUSING
1/22.	[1]	139916-0100	CAPSULE
1/30.	[3]	029040-6220	STUD
1/35A.	[1]	134419-0000	ADAPTOR
1/40.	[1]	131002-4700	ADAPTOR
1/40A.	[1]	131002-5000	ADAPTOR
1/50.	[1]	131311-0100	SPACER RING
2.	[1]	131028-6020	COVER
2/2.	[1]	131011-0800	GASKET
3.	[2]	131017-1000	FLAT-HEAD SCREW
5.	[2]	029340-6020	GASKET D10&6.5T1.00
16.	[6]	131034-1501	CAPSULE
21.	[3]	139206-0400	UNION NUT
23.	[1]	029633-1010	O-RING
25.	[1]	131563-1500	BRACKET
30.	[6]	131153-6220	PLUNGER-AND-BARREL ASSY
36.	[6]	131181-0020	VALVE
37.	[6]	134112-2900	COILED SPRING
40.	[6]	131115-0800	GASKET
41.	[6]	131116-9700	FITTING
42.	[6]	134117-2000	FILLER PIECE
45.	[3]	131122-0520	PLATE
49.	[6]	029632-0070	O-RING &20W2
55.	[6]	131200-2720	TAPPET
55/2.	[1]	131203-0500	BEARING PIN
55/3.	[1]	131204-1100	ROLLER
55/4.	[1]	131205-0600	BUSHING
55/5.	[1]	131206-0700	SLIDER
56/1.	[0]	029311-0020	SHIM D19&10T0.30
56/1.	[0]	029311-0030	SHIM D19&10T0.40
56/1.	[0]	029311-0040	SHIM D19&10T0.50
56/1.	[0]	029311-0050	SHIM D19&10T0.6
56/1.	[0]	029311-0060	SHIM D19&10T0.7
56/1.	[0]	029311-0070	SHIM D19&10T0.8
56/1.	[0]	029311-0080	SHIM D19&10T0.9
56/1.	[0]	029311-0090	SHIM D19&10T1
56/1.	[0]	029311-0110	SHIM D19&10T1.1
56/1.	[0]	029311-0120	SHIM D19&10T1.2
56/1.	[0]	029311-0130	SHIM D19&10T1.3
56/1.	[0]	029311-0140	SHIM D19&10T1.4
56/1.	[0]	029311-0270	SHIM D19&10T0.55
56/1.	[0]	029311-0280	SHIM D19&10T0.65
56/1.	[0]	029311-0290	SHIM D19&10T0.75
56/1.	[0]	029311-0310	SHIM D19&10T0.85
56/1.	[0]	029311-0320	SHIM D19&10T0.95
56/1.	[0]	029311-0330	SHIM D19&10T1.05
56/1.	[0]	029311-0340	SHIM D19&10T1.15
56/1.	[0]	029311-0350	SHIM D19&10T1.25
56/1.	[0]	029311-0490	SHIM D19&10T1.5
56/1.	[0]	029311-0500	SHIM D19&10T1.6
56/1.	[0]	029311-0580	SHIM D19&10T0.2
56/1.	[0]	029311-0590	SHIM D19&10T0.25
56/1.	[0]	029311-0600	SHIM D19&10T0.35
56/1.	[0]	029311-0610	SHIM D19&10T0.45
56/1.	[0]	029311-0620	SHIM D19&10T1.35
56/1.	[0]	029311-0630	SHIM D19&10T1.45
56/1.	[0]	029311-0710	SHIM D19&10T1.55
61.	[6]	131215-2100	COMPRESSION SPRING
62.	[6]	131216-0400	SLOTTED WASHER
63.	[6]	131217-0600	SLOTTED WASHER
67.	[1]	131256-0000	CONTROL RACK
68.	[1]	131226-0300	FLAT-HEAD SCREW
76.	[6]	131240-0100	PINION
77.	[6]	131241-0500	CONTROL SLEEVE
78.	[6]	131242-0100	FLAT-HEAD SCREW
90.	[1]	131375-2200	CAMSHAFT
91A.	[1]	016640-2030	BEARING PLATE
91B.	[1]	028202-0020	BEARING PLATE
91E.	[1]	016630-2030	BEARING PLATE
91F.	[1]	028201-7020	BEARING PLATE
92.	[1]	131302-0400	SPACER RING
92A.	[1]	131302-1000	SPACER RING
93/1.	[0]	029311-7010	SHIM D22&17T0.1
93/1.	[0]	029311-7020	SHIM D22&17T0.12
93/1.	[0]	029311-7030	SHIM D22&17T0.14
93/1.	[0]	029311-7040	SHIM D22&17T0.16
93/1.	[0]	029311-7050	SHIM D22&17T0.18
93/1.	[0]	029311-7060	SHIM D22&17T0.5
93/1.	[0]	029311-7070	SHIM D22&17T1.0
93/1.	[0]	029311-7090	SHIM D22&17T0.3
93/1.	[0]	029311-7210	SHIM D22&17T0.7
93/1.	[0]	029311-7220	SHIM D22&17T1.4
93/1.	[0]	139417-0000	SHIM D22&17T2.4
93A/1.	[0]	029312-0220	SHIM D27&20T0.1
93A/1.	[0]	029312-0230	SHIM D27&20T0.12
93A/1.	[0]	029312-0240	SHIM D27&20T0.14
93A/1.	[0]	029312-0250	SHIM D27&20T0.16
93A/1.	[0]	029312-0260	SHIM D27&20T0.18
93A/1.	[0]	029312-0270	SHIM D27&20T0.5
93A/1.	[0]	029312-0290	SHIM D27&20T0.3
93A/1.	[0]	029312-0300	SHIM D27&20T1.0
93A/1.	[0]	139420-0400	SHIM D27&20T0.7
95.	[1]	131305-0600	BEARING SHELL
96.	[2]	139105-0200	FLAT-HEAD SCREW
97.	[2]	026505-0940	GASKET
99A.	[1]	131330-4000	PLATE
100A.	[1]	029622-0190	PACKING RING
101A.	[1]	131330-1800	COVER
104A.	[4]	020006-2040	BLEEDER SCREW M6P1L20 4T
106A.	[1]	131321-1900	GASKET
112A.	[1]	029470-4030	WOODRUFF KEY
117A.	[1]	131420-0400	BLEEDER SCREW
118A.	[1]	026506-1040	GASKET D9.9&6.2T1
131.	[1]	139814-0900	EYE BOLT
131A.	[1]	131424-8420	OVER FLOW VALVE
133.	[2]	029341-4130	GASKET D20&13.8T2*
133A.	[2]	029341-4130	GASKET D20&13.8T2*
191.	[1]	131460-4820	BRACKET
192.	[1]	029637-5020	O-RING &73.5W2
194.	[2]	139310-0000	PLAIN WASHER
195.	[4]	014111-0440	LOCKING WASHER
196.	[4]	013021-0040	UNION NUT M10P1.5H8
197.	[1]	131563-2600	BRACKET
334.	[1]	029731-0120	EYE BOLT
336.	[2]	026510-1340	GASKET D13.4&10.2T1

Include in #1:

101607-6599 as FUEL INJECTION PUMP

106871-3200 as _

Cross reference number

Zexel num

Bosch num

Firm num

Name

101061-8851

9 410 610 345
NP-PES6AD105B412L

ME740878 MITSUBISHI

FUEL-INJECTION PUMP
Q 14BF FUEL INJECTION PUMP PE6AD PE

Information:

1. Remove wiring harnesses from bracket (1). 2. Disconnect the wires at connections (5). Remove seal wire (4). Remove five bolts (2), bracket (1) cover (3) and the gasket. 3. Remove two bolts (6) and clamps. Remove rack solenoid (7). 4. Disconnect wires at connections (8). Remove two bolts (10) and bracket assembly (9). Loosen the locknut and remove rack position sensor (11). Be careful not to lose the spring that is around the sensor. To remove the transducer module at this time use the following procedure:a. disconnect wires at connector (8).b. remove the connectors from the wires.c. remove four bolts that fasten transducer module (22) to housing (18).d. feed the wires through housing (18) while removing the transducer module. 5. Remove three bolts (12) from inside housing (14). Remove two bolts (13) and remove housing (14).
Typical Example6. Loosen locknut (15) and remove engine speed sensor (16).
Typical Example7. Remove seven bolts (17) and remove the transducer module and housing (18). 8. Remove three bolts (19) and cover (20). 9. Remove two bolts (21). Remove transducer module (22) and gasket. 10. Remove lockring (27), seat (25), spring (24), sleeve (23) and lockring (26). 11. Remove three bolts (28) and remove cylinder (29). 12. Remove sleeve (30), piston (31) and valve (32). Remove O-ring seal (33) from sleeve (30). 13. Remove bolts (34) and remove retainer (35). Remove two races and one bearing (not shown). Assemble Rack Actuator Package
1. Lubricate bearing (37) with engine oil. Install race (36), bearing (37), race (36) and retainer (35) on the fuel injection pump camshaft. 2. Lubricate O-ring seal (33) with engine oil and install on sleeve (30). Install valve (32) and piston (31) into sleeve (33). 3. Install sleeve (30) into cylinder (29).4. Install lockring (26), sleeve (23), spring (24), seat (25) and lockring (27) on valve (32). 5. Put cylinder assembly (29) in position on the fuel injection pump housing with piston (31) engaged over fuel injection pump rack (38). Be sure that rack (38) is properly engaged with piston (31). 6. Fasten cylinder (29) to the fuel injection pump housing with three bolts (28). The rack and servo valve (32) must move freely after bolts (28) are tight. 7. Install gasket (39) and transducer module (22) on housing (18). 8. Place wire harness (40) in the slot of the housing. 9. Install cover (20) and bolts (19).
Typical Example10. Install the gasket and housing (18) on the fuel injection pump housing with seven bolts (17).
Typical Example11. Install engine speed sensor (16) until it contacts retainer (35). Back the engine speed sensor out (counterclockwise) 180°. This procedure will provide a clearance of .76 mm (.030 in). Tighten locknut (15).
Typical Example12. Install gasket and housing (14).13. Install the rack position sensor damping seal in housing (14). Install the spring and rack position sensor (11) in housing (14).14. Connect the rack position sensor wiring connector to the transducer module wiring connector (P1 to J1). Connect the transducer module wiring connector to the control module wiring