Information fuel-injection pump
ZEXEL
101061-8271
1010618271
MITSUBISHI
ME730328
me730328
Rating:
Cross reference number
Zexel num
Bosch num
Firm num
Name
101061-8271
ME730328 MITSUBISHI
FUEL-INJECTION PUMP
Q
Q
Information:
Start By:a. remove oil pump1. Check the main bearing caps for identification for their location and direction in the block. The caps must be installed in the same location and direction from which they were removed. 2. Remove No. 2 through No. 6 bearing caps (1). Remove thrust plates from the No. 4 main bearing.
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the
If the crankshaft is turned in the wrong direction, the tab of the bearing will be pushed between the crankshaft and cylinder block. This can cause damage to either the crankshaft or cylinder block or both.
3. Remove the upper halves of the main bearings by putting tool (A) in oil hole (2) in the crankshaft. Turn the crankshaft in the direction which will push the
Have questions with 101061-8271?
Group cross 101061-8271 ZEXEL
Mitsubishi
Mitsubishi
101061-8271
ME730328
FUEL-INJECTION PUMP