101060-9740 ZEXEL 9 410 612 759 BOSCH FUEL-INJECTION PUMP 9410612759 1010609740 me032898

Information fuel-injection pump

BOSCH 9 410 612 759 9410612759

ZEXEL 101060-9740 1010609740

MITSUBISHI ME032898 me032898

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 101060-9740 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	131072-8220	PUMP HOUSING
1/30.	[3]	029040-6220	STUD
1/35A.	[1]	134419-0000	ADAPTOR
1/40.	[1]	131423-0900	ADAPTOR
1/40A.	[1]	131423-1300	ADAPTOR
2.	[1]	131028-6020	COVER
2/2.	[1]	131011-0800	GASKET
3.	[2]	131017-1000	FLAT-HEAD SCREW
5.	[2]	029340-6020	GASKET D10&6.5T1.00
16.	[6]	131034-1401	CAPSULE
21.	[3]	139206-0400	UNION NUT
23.	[1]	029633-1010	O-RING
30.	[6]	131151-2220	PLUNGER-AND-BARREL ASSY
36.	[6]	131110-4720	DELIVERY-VALVE ASSEMBLY
37.	[6]	131112-2300	COILED SPRING
40.	[6]	131115-1600	GASKET
41.	[6]	131116-7920	FITTING
42.	[6]	131117-3100	FILLER PIECE
45.	[3]	131122-0320	PLATE
49.	[6]	029632-0030	O-RING
55.	[6]	131200-0620	TAPPET
55/2.	[1]	131201-0100	UNION NUT
55/3.	[1]	131202-0100	HEXAGON SCREW
55/4.	[1]	131203-0200	BEARING PIN
55/5.	[1]	131204-1000	ROLLER
55/6.	[1]	131205-0500	BUSHING
55/7.	[1]	131206-0200	SLIDER
61.	[6]	131215-2400	COMPRESSION SPRING
62.	[6]	131216-0100	SLOTTED WASHER
63.	[6]	131217-0100	SLOTTED WASHER
67.	[1]	131256-0000	CONTROL RACK
68.	[1]	131226-0300	FLAT-HEAD SCREW
76.	[6]	131240-0100	PINION
77.	[6]	131241-0100	CONTROL SLEEVE
78.	[6]	131242-0100	FLAT-HEAD SCREW
90.	[1]	131371-1700	CAMSHAFT
91A.	[1]	016640-2030	BEARING PLATE
91B.	[1]	028202-0020	BEARING PLATE
91E.	[1]	016630-2030	BEARING PLATE
91F.	[1]	028201-7020	BEARING PLATE
92.	[1]	131302-0400	SPACER RING
92A.	[1]	131302-1000	SPACER RING
93/1.	[0]	029311-7010	SHIM D22&17T0.1
93/1.	[0]	029311-7020	SHIM D22&17T0.12
93/1.	[0]	029311-7030	SHIM D22&17T0.14
93/1.	[0]	029311-7040	SHIM D22&17T0.16
93/1.	[0]	029311-7050	SHIM D22&17T0.18
93/1.	[0]	029311-7060	SHIM D22&17T0.5
93/1.	[0]	029311-7070	SHIM D22&17T1.0
93/1.	[0]	029311-7090	SHIM D22&17T0.3
93/1.	[0]	029311-7210	SHIM D22&17T0.7
93/1.	[0]	029311-7220	SHIM D22&17T1.4
93/1.	[0]	139417-0000	SHIM D22&17T2.4
93A/1.	[0]	029312-0220	SHIM D27&20T0.1
93A/1.	[0]	029312-0230	SHIM D27&20T0.12
93A/1.	[0]	029312-0240	SHIM D27&20T0.14
93A/1.	[0]	029312-0250	SHIM D27&20T0.16
93A/1.	[0]	029312-0260	SHIM D27&20T0.18
93A/1.	[0]	029312-0270	SHIM D27&20T0.5
93A/1.	[0]	029312-0290	SHIM D27&20T0.3
93A/1.	[0]	029312-0300	SHIM D27&20T1.0
93A/1.	[0]	139420-0400	SHIM D27&20T0.7
95.	[1]	131306-0800	BEARING SHELL
96.	[2]	029050-5010	FLAT-HEAD SCREW M5P0.8L32
97.	[2]	026505-0940	GASKET
100A.	[1]	029622-0190	PACKING RING
101A.	[1]	131330-1800	COVER
104A.	[4]	020006-2040	BLEEDER SCREW M6P1L20 4T
106A.	[1]	131321-1900	GASKET
112A.	[1]	029470-4030	WOODRUFF KEY
117A.	[1]	131420-0400	BLEEDER SCREW
118A.	[1]	026506-1040	GASKET D9.9&6.2T1
131.	[1]	139814-0900	EYE BOLT
131A.	[1]	131424-5520	OVER FLOW VALVE
132.	[2]	029341-4130	GASKET D20&13.8T2*
132A.	[2]	029341-4130	GASKET D20&13.8T2*
191.	[1]	131459-4720	BRACKET
191/2.	[4]	029041-0300	STUD
192.	[1]	029637-5020	O-RING &73.5W2
194.	[4]	139310-0000	PLAIN WASHER
195.	[4]	014111-0440	LOCKING WASHER
196.	[4]	013021-0040	UNION NUT M10P1.5H8
334.	[1]	029731-0120	EYE BOLT
336.	[2]	026510-1340	GASKET D13.4&10.2T1

Include in #1:

101603-1950 as FUEL INJECTION PUMP

101603-1960

101603-1961

Include in #2:

105856-0400 as _

Cross reference number

Zexel num

Bosch num

Firm num

Name

101060-9740

9 410 612 759
NP-PES6A95C312LS2000

ME032898 MITSUBISHI

FUEL-INJECTION PUMP
Q

Information:

1. Loosen two bolts (2) and two nuts (3). Remove bolt (1), and remove fan drive belts (4). 2. Remove the nuts and bolts that hold the fan drive in place. Remove fan drive (5). The following steps are for installation of the fan drive.3. Put fan drive (5) in position on the timing gear cover.4. Install bolts (2) and nuts (3) loosely. Make a replacement of the belts as a set only.5. Install fan bolts (4). Install bolt (1). Make an adjustment to the belt tension with tool (A). Measure the belt farthest away from the engine. Tighten new belts to a gauge indication of 120 5. After the engine is operated at high idle for a minimum of 30 minutes, make another adjustment to the belt tension. The correct tension for used belts is a gauge indication of 90 10.6. Tighten bolts (2) and nuts (3) that hold the fan drive in place.Disassemble Fan Drive
Start By:a. remove fan drive This is a typical later model fan drive. 1. Remove two bolts (2) that hold the fan adapter to the pulley.2. Remove fan adapter (1) from the pulley. 3. Remove bolts (3) and washer (4). Remove seal (5). 4. Remove pulley (8) from bracket (6).5. Remove bearing (10) and spacer (9) from the pulley. Remove spacer (7), seal (11) and bearing (12) from the pulley.Assemble Fan Drive
1. Install bearing (12) in the rear of the pulley (8). 2. Install lip-type seal (11) with tooling (A). The lip of the seal must be away from the bearing. Put 5P960 Multipurpose Type Grease on the lip of the seal.3. Install spacer (7) so the end with the taper is toward the inside of pulley (8).4. Install spacer (9) and bearing (4) in the front of the pulley. 5. Put seal (5) on the front of the pulley. Install the pulley on bracket (6). 6. Install washer (4) and bolts (3) that hold the pulley in position.7. Install the fan drive adapter on the pulley.8. Fill the fan drive with 5P960 Multipurpose Type Grease.End by:a. install fan drive