101060-9690 ZEXEL 9 410 610 070 BOSCH FUEL-INJECTION PUMP 9410610070 1010609690 me717101

Information fuel-injection pump

BOSCH 9 410 610 070 9410610070

ZEXEL 101060-9690 1010609690

MITSUBISHI ME717101 me717101

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 101060-9690 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	131072-5820	PUMP HOUSING
1/30.	[3]	029040-6220	STUD
1/35A.	[1]	134419-0000	ADAPTOR
1/40.	[1]	131423-0900	ADAPTOR
1/40A.	[1]	131423-1300	ADAPTOR
2.	[1]	131028-6020	COVER
2/2.	[1]	131011-0800	GASKET
3.	[2]	131017-1000	FLAT-HEAD SCREW
5.	[2]	029340-6020	GASKET D10&6.5T1.00
16.	[6]	131034-1401	CAPSULE
21.	[3]	139206-0400	UNION NUT
23.	[1]	029633-1010	O-RING
25.	[1]	131563-1500	BRACKET
30.	[6]	131152-3320	PLUNGER-AND-BARREL ASSY
36.	[6]	131160-2620	DELIVERY-VALVE ASSEMBLY
37.	[6]	131112-4700	COMPRESSION SPRING
40.	[6]	131115-1600	GASKET
41.	[6]	131116-7600	FITTING
42/1.	[1]	131117-3500	FILLER PIECE T4.1
42/1.	[1]	131117-3600	FILLER PIECE T4.3
42/1.	[1]	131117-3700	FILLER PIECE T4.5
42/1.	[1]	131117-3800	FILLER PIECE T4.7
42/1.	[1]	131117-3900	FILLER PIECE T4.9
42/1.	[1]	131117-4100	FILLER PIECE T3.9
45.	[3]	131122-0320	PLATE
49.	[6]	029632-0030	O-RING
55.	[6]	131200-2820	TAPPET
55/2.	[1]	131203-0800	BEARING PIN
55/3.	[1]	131204-1000	ROLLER
55/4.	[1]	131205-0500	BUSHING
55/5.	[1]	131206-0200	SLIDER
56/1.	[0]	029311-0020	SHIM D19&10T0.30
56/1.	[0]	029311-0030	SHIM D19&10T0.40
56/1.	[0]	029311-0040	SHIM D19&10T0.50
56/1.	[0]	029311-0050	SHIM D19&10T0.6
56/1.	[0]	029311-0060	SHIM D19&10T0.7
56/1.	[0]	029311-0070	SHIM D19&10T0.8
56/1.	[0]	029311-0080	SHIM D19&10T0.9
56/1.	[0]	029311-0090	SHIM D19&10T1
56/1.	[0]	029311-0110	SHIM D19&10T1.1
56/1.	[0]	029311-0120	SHIM D19&10T1.2
56/1.	[0]	029311-0130	SHIM D19&10T1.3
56/1.	[0]	029311-0140	SHIM D19&10T1.4
56/1.	[0]	029311-0270	SHIM D19&10T0.55
56/1.	[0]	029311-0280	SHIM D19&10T0.65
56/1.	[0]	029311-0290	SHIM D19&10T0.75
56/1.	[0]	029311-0310	SHIM D19&10T0.85
56/1.	[0]	029311-0320	SHIM D19&10T0.95
56/1.	[0]	029311-0330	SHIM D19&10T1.05
56/1.	[0]	029311-0340	SHIM D19&10T1.15
56/1.	[0]	029311-0350	SHIM D19&10T1.25
56/1.	[0]	029311-0490	SHIM D19&10T1.5
56/1.	[0]	029311-0500	SHIM D19&10T1.6
56/1.	[0]	029311-0580	SHIM D19&10T0.2
56/1.	[0]	029311-0590	SHIM D19&10T0.25
56/1.	[0]	029311-0600	SHIM D19&10T0.35
56/1.	[0]	029311-0610	SHIM D19&10T0.45
56/1.	[0]	029311-0620	SHIM D19&10T1.35
56/1.	[0]	029311-0630	SHIM D19&10T1.45
56/1.	[0]	029311-0710	SHIM D19&10T1.55
61.	[6]	131215-2300	COMPRESSION SPRING
62.	[6]	131216-0100	SLOTTED WASHER
63.	[6]	131217-0200	SLOTTED WASHER
67.	[1]	131256-0000	CONTROL RACK
68.	[1]	131226-0300	FLAT-HEAD SCREW
76.	[6]	131240-0100	PINION
77.	[6]	131241-0100	CONTROL SLEEVE
78.	[6]	131242-0100	FLAT-HEAD SCREW
90.	[1]	131371-2500	CAMSHAFT
91A.	[1]	016640-2030	BEARING PLATE
91B.	[1]	028202-0020	BEARING PLATE
91E.	[1]	016630-2030	BEARING PLATE
91F.	[1]	028201-7020	BEARING PLATE
92.	[1]	131302-0400	SPACER RING
92A.	[1]	131302-1000	SPACER RING
93/1.	[0]	029311-7010	SHIM D22&17T0.1
93/1.	[0]	029311-7020	SHIM D22&17T0.12
93/1.	[0]	029311-7030	SHIM D22&17T0.14
93/1.	[0]	029311-7040	SHIM D22&17T0.16
93/1.	[0]	029311-7050	SHIM D22&17T0.18
93/1.	[0]	029311-7060	SHIM D22&17T0.5
93/1.	[0]	029311-7070	SHIM D22&17T1.0
93/1.	[0]	029311-7090	SHIM D22&17T0.3
93/1.	[0]	029311-7210	SHIM D22&17T0.7
93/1.	[0]	029311-7220	SHIM D22&17T1.4
93/1.	[0]	139417-0000	SHIM D22&17T2.4
93A/1.	[0]	029312-0220	SHIM D27&20T0.1
93A/1.	[0]	029312-0230	SHIM D27&20T0.12
93A/1.	[0]	029312-0240	SHIM D27&20T0.14
93A/1.	[0]	029312-0250	SHIM D27&20T0.16
93A/1.	[0]	029312-0260	SHIM D27&20T0.18
93A/1.	[0]	029312-0270	SHIM D27&20T0.5
93A/1.	[0]	029312-0290	SHIM D27&20T0.3
93A/1.	[0]	029312-0300	SHIM D27&20T1.0
93A/1.	[0]	139420-0400	SHIM D27&20T0.7
95.	[1]	131306-1000	BEARING SHELL
96.	[2]	029050-5010	FLAT-HEAD SCREW M5P0.8L32
97.	[2]	026505-0940	GASKET
100A.	[1]	029622-0190	PACKING RING
101A.	[1]	131330-1800	COVER
104A.	[4]	020006-2040	BLEEDER SCREW M6P1L20 4T
106A.	[1]	131321-1900	GASKET
112A.	[1]	029470-4030	WOODRUFF KEY
117A.	[1]	131420-0400	BLEEDER SCREW
118A.	[1]	026506-1040	GASKET D9.9&6.2T1
131.	[1]	139814-0900	EYE BOLT
131A.	[1]	131424-5520	OVER FLOW VALVE
132.	[2]	029341-4130	GASKET D20&13.8T2*
132A.	[2]	029341-4130	GASKET D20&13.8T2*
191.	[1]	131460-2020	BRACKET
191/2.	[4]	029041-0300	STUD
192.	[1]	029637-5020	O-RING &73.5W2
194.	[2]	139310-0000	PLAIN WASHER
195.	[4]	014111-0440	LOCKING WASHER
196.	[4]	013021-0040	UNION NUT M10P1.5H8
197.	[1]	131563-2600	BRACKET
334.	[1]	029731-0120	EYE BOLT
336.	[2]	026510-1340	GASKET D13.4&10.2T1

Include in #1:

101603-1920 as FUEL INJECTION PUMP

Include in #2:

104205-4110 as _

Cross reference number

Zexel num

Bosch num

Firm num

Name

101060-9690

9 410 610 070
NP-PES6A95C312LS2S

ME717101 MITSUBISHI

FUEL-INJECTION PUMP
Q 14BE FUEL INJECTION PUMP PE6A PE

Information:

1. Remove wiring harnesses from bracket (1). 2. Disconnect the wires at connections (5) Remove line (4). Remove five bolts (2), bracket (1) cover (3) and the gasket. 3. Remove two bolts (6) and clamps. Remove rack solenoid. (7) 4. Disconnect wires at connections (8). Remove two bolts (10) and bracket assembly (9). Loosen the locknut and remove rack position sensor (11). Be careful not to lose the spring that is around the sensor. To remove the transducer module at this time use the following procedure.a. disconnect wires at connector (8)b. remove the connector from the wiresc. remove four bolts that fasten transducer module (22) to housing (15)d. feed the wires through housing (18) while removing the transducer module. 5. Remove three bolts (12) from inside housing (14). Remove two bolts (13) and remove housing (14). 6. Loosen locknut (15) and remove engine speed sensor (16). 7. Remove seven bolts (17) and remove the transducer module and housing (18). 8. Remove three bolts (19) and cover (20). 9. Remove two bolts (21). Remove transducer module (22) and gasket. 10. Remove lockring (27), seat (25), spring (24), sleeve (23) and lockring (26). 11. Remove three bolts (28) and remove cylinder (29). 12. Remove sleeve (30), piston (31) and valve (32). Remove O-ring seal (33) from sleeve (30). 13. Remove bolts (34) and remove retainer (35). Remove two races and one bearing (not shown).Assemble Rack Actuator Package
1. Lubricate bearing (37) with engine oil. Install race (36), bearing (37), race (36) and retainer (35) on the fuel injection pump camshaft. 2. Lubricate O-ring seal (33) with engine oil and install on sleeve (30). Install sleeve (32) and piston (31) into sleeve (33). 3. Install sleeve (30) into cylinder (29).4. Install lockring (26), sleeve (23), spring (24), seat (25) and lockring (27) on valve (32). 5. Put cylinder assembly (29) in position on the fuel injection pump housing with piston (31) engaged over fuel injection pump rack (38). Be sure that rack (38) is properly engaged with piston (31). 6. Fasten cylinder (29) to the fuel injection pump housing with three bolts (28). The rack and servo valve (32) must move freely after bolts (28) are tight. 7. Install gasket (39) and transducer module (22) on housing (18). 8. Place wire harness (40) in the slot of the housing. 9. Install cover (20) and bolts (19). 10. Install the gasket and housing (18) on the fuel injection pump housing with seven bolts (17). 11. Install engine speed sensor (16) until it contacts retainer (35). Back the engine speed sensor out (counterclockwise) 180°. This procedure will provide a clearance of .76 mm (.030 in). Tighten locknut (15) to a torque of 13 2 N m (10 1 lb.ft.). 12. Install gasket and housing (14).13. Install the rack position sensor damping seal in housing (14). Install the spring and rack position sensor (11) in housing (14). 14. Connect the rack position sensor wiring connector to the transducer module wiring connector (P8 to