Fuel injectors
  1. Home
  2. fuel
  3. #1010602070

101060-2070 ZEXEL 9 410 613 804 BOSCH FUEL-INJECTION PUMP 9410613804 1010602070 1156101070


 

Information fuel-injection pump

BOSCH 9 410 613 804 9410613804
ZEXEL 101060-2070 1010602070
ISUZU 1156101070 1156101070
101060-2070 FUEL-INJECTION PUMP
Rating:
85
Buy FUEL-INJECTION PUMP 101060-2070 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

PUMP HOUSING
1. [1] 131071-1220 PUMP HOUSING
1/30. [3] 029040-6020 STUD
1/35A. [1] 131400-0100 ADAPTOR
1/40. [1] 131423-0800 ADAPTOR
1/40A. [1] 131420-0420 BLEEDER SCREW
2. [1] 131028-6020 COVER
2/2. [1] 131011-0800 GASKET
3. [2] 131017-1000 FLAT-HEAD SCREW
5. [2] 029340-6020 GASKET D10&6.5T1.00
16. [6] 131034-1401 CAPSULE
21. [3] 139206-0400 UNION NUT
23. [1] 029633-1010 O-RING
30. [6] 131151-3220 PLUNGER-AND-BARREL ASSY
36. [6] 131110-5920 DELIVERY-VALVE ASSEMBLY
37. [6] 131112-2300 COILED SPRING
40. [6] 131115-1600 GASKET
41. [6] 131116-5220 FITTING
45. [3] 131122-0520 PLATE
49. [6] 029632-0030 O-RING
55. [6] 131200-0220 TAPPET
55/2. [1] 131203-0200 BEARING PIN
55/3. [1] 131204-1000 ROLLER
55/4. [1] 131205-0500 BUSHING
55/5. [1] 131206-0200 SLIDER
56/1. [0] 029311-0020 SHIM D19&10T0.30
56/1. [0] 029311-0030 SHIM D19&10T0.40
56/1. [0] 029311-0040 SHIM D19&10T0.50
56/1. [0] 029311-0050 SHIM D19&10T0.6
56/1. [0] 029311-0060 SHIM D19&10T0.7
56/1. [0] 029311-0070 SHIM D19&10T0.8
56/1. [0] 029311-0080 SHIM D19&10T0.9
56/1. [0] 029311-0090 SHIM D19&10T1
56/1. [0] 029311-0110 SHIM D19&10T1.1
56/1. [0] 029311-0120 SHIM D19&10T1.2
56/1. [0] 029311-0130 SHIM D19&10T1.3
56/1. [0] 029311-0140 SHIM D19&10T1.4
56/1. [0] 029311-0270 SHIM D19&10T0.55
56/1. [0] 029311-0280 SHIM D19&10T0.65
56/1. [0] 029311-0290 SHIM D19&10T0.75
56/1. [0] 029311-0310 SHIM D19&10T0.85
56/1. [0] 029311-0320 SHIM D19&10T0.95
56/1. [0] 029311-0330 SHIM D19&10T1.05
56/1. [0] 029311-0340 SHIM D19&10T1.15
56/1. [0] 029311-0350 SHIM D19&10T1.25
56/1. [0] 029311-0490 SHIM D19&10T1.5
56/1. [0] 029311-0500 SHIM D19&10T1.6
56/1. [0] 029311-0580 SHIM D19&10T0.2
56/1. [0] 029311-0590 SHIM D19&10T0.25
56/1. [0] 029311-0600 SHIM D19&10T0.35
56/1. [0] 029311-0610 SHIM D19&10T0.45
56/1. [0] 029311-0620 SHIM D19&10T1.35
56/1. [0] 029311-0630 SHIM D19&10T1.45
56/1. [0] 029311-0710 SHIM D19&10T1.55
61. [6] 131215-2500 COMPRESSION SPRING
62. [6] 131216-0100 SLOTTED WASHER
63. [6] 131217-0200 SLOTTED WASHER
67. [1] 131256-0000 CONTROL RACK
68. [1] 131226-0300 FLAT-HEAD SCREW
76. [6] 131240-0100 PINION
77. [6] 131241-0100 CONTROL SLEEVE
78. [6] 131242-0100 FLAT-HEAD SCREW
90. [1] 131370-1400 CAMSHAFT
91A. [1] 016630-2030 BEARING PLATE
91B. [1] 028201-7020 BEARING PLATE
91E. [1] 016630-2030 BEARING PLATE
91F. [1] 028201-7020 BEARING PLATE
92. [1] 131302-0300 SPACER RING
92A. [1] 131302-0300 SPACER RING
93/1. [0] 029311-7010 SHIM D22&17T0.1
93/1. [0] 029311-7020 SHIM D22&17T0.12
93/1. [0] 029311-7030 SHIM D22&17T0.14
93/1. [0] 029311-7040 SHIM D22&17T0.16
93/1. [0] 029311-7050 SHIM D22&17T0.18
93/1. [0] 029311-7060 SHIM D22&17T0.5
93/1. [0] 029311-7070 SHIM D22&17T1.0
93/1. [0] 029311-7090 SHIM D22&17T0.3
93/1. [0] 029311-7210 SHIM D22&17T0.7
93/1. [0] 029311-7220 SHIM D22&17T1.4
93/1. [0] 139417-0000 SHIM D22&17T2.4
93A/1. [0] 029311-7010 SHIM D22&17T0.1
93A/1. [0] 029311-7020 SHIM D22&17T0.12
93A/1. [0] 029311-7030 SHIM D22&17T0.14
93A/1. [0] 029311-7040 SHIM D22&17T0.16
93A/1. [0] 029311-7050 SHIM D22&17T0.18
93A/1. [0] 029311-7060 SHIM D22&17T0.5
93A/1. [0] 029311-7070 SHIM D22&17T1.0
93A/1. [0] 029311-7090 SHIM D22&17T0.3
93A/1. [0] 029311-7210 SHIM D22&17T0.7
93A/1. [0] 029311-7220 SHIM D22&17T1.4
93A/1. [0] 139417-0000 SHIM D22&17T2.4
95. [1] 131306-0800 BEARING SHELL
96. [2] 029050-5010 FLAT-HEAD SCREW M5P0.8L32
97. [2] 026505-0940 GASKET
100A. [1] 029621-7050 PACKING RING
101A. [1] 131316-2400 COVER
104A. [4] 020006-1440 BLEEDER SCREW M6P1L14
106A. [1] 029634-4020 O-RING
112A. [1] 025803-1610 WOODRUFF KEY
117A. [1] 139814-0000 EYE BOLT
118A. [2] 139514-0000 GASKET D19.2&14.2T1.0
152. [1] 139812-0100 EYE BOLT
154. [2] 139512-0000 GASKET D17.2&12.2T1.0
334. [1] 139810-0000 EYE BOLT
336. [2] 139510-0000 GASKET D15.2&10.2T1.0
360A. [1] 131496-0300 POINTER
361A. [2] 029010-6680 BLEEDER SCREW

Include in #1:

101441-9460 as _
101601-4900 as FUEL INJECTION PUMP

Cross reference number

Zexel num
Bosch num
Firm num
Name
101060-2070 
9 410 613 804 
NP-PE6A95C412RS2000NP708 
1156101070  ISUZU
FUEL-INJECTION PUMP
* Q




Information:

37. Remove races (70) and (72) and bearing (71) from the camshaft in the fuel injection pump housing. Assemble Governor
1. Put the fuel injection pump housing in position on tool (A). Install race (3), bearing (2) and race (1) on the end of the camshaft in the fuel injection pump housing. 2. Put flyweights (5) in position on carrier assembly (4), and install dowels (6) to hold the flyweights in place. The flyweights must move freely on the dowels and have 0.010 to 0.230 mm (.0004 to .0090 in) end play. 3. Install governor shaft (7) on carrier assembly (4). 4. Install dowel (8) in governor shaft (7), and slide carrier assembly (4) down on the governor shaft until dowel (8) fits into the slot in the carrier assembly.5. Install carrier assembly (4) on the end of the camshaft. 6. Install race (12), bearing (11), race (10) and ring (9) on riser (13). 7. Install riser (13) and spring (14), if equipped, on the governor shaft. 8. Install spool (18) and ring (19) on seat (17), and use tool (B) to install ring (20) to hold them in position.9. Install seat (17) on spring (16) and spring (16) on shield (15). 10. Install dashpot assembly (21) on the governor shaft. 11. Install ring (22) in the groove on the governor shaft. Install sleeve (23), spring (25), the sleeve and bearing (24) on the governor shaft. 12. Use tool (C) to hold spring (25) under compression, and install the ring in the groove on the governor shaft. 13. Install O-ring seal (26) on sleeve (27). Install piston (29) and sleeve (27) in the governor servo as shown.14. Install valve (28) in the governor servo as shown. 15. Install lockring (33) in the groove near the center of valve (28). Put sleeve (34), spring (broken link spring) (35) and seat (36) in position on valve (28), and install lockring (37) to hold them in place. 16. Put governor servo (30) in position on the fuel injection pump housing with piston (29) engaged over the rack. Make sure the lever is engaged in the (slot) groove of riser (13). 17. If dowel (43) was removed, install it in block (44) 31 0.5 mm (1.22 .02 in) above the outside surface of the block.18. Install bolt (45) in block (44) and spring (38) on bolt (45).19. Install stop screw (40) and the locknut on collar (42). Install power setting screw (41) and the locknut on the collar.20. Install collar (42) on bolt (45). Make an alignment of the hole in the collar with the notch in bolt (45), and install bolt (39). 21. If the dowels that align block (44) with the front governor housing were removed, install them 4.0 0.5 mm (.16 .02 in) above the outside surface of the front governor housing.22. Put block (44) in position on the front governor housing with the holes in the block in alignment with dowels in the front governor

Have questions with 101060-2070?





Group cross 101060-2070 ZEXEL

Isuzu 

101060-2020  

101060-2601 
 
1156100850 
FUEL-INJECTION PUMP
101060-2030  

101060-2611 
 
1156100840 
FUEL-INJECTION PUMP
101060-2040  

101060-4211 
 
1156100860 
FUEL-INJECTION PUMP
101060-2051  
9 410 611 382 
NP-PE6A95C410RS2000NP690 
1156100950 
FUEL-INJECTION PUMP
101060-2070  
9 410 613 804 
NP-PE6A95C412RS2000NP708 
1156101070 
FUEL-INJECTION PUMP

Mitsubishi 

101060-2090  

101060-2381 
 
ME056126 
FUEL-INJECTION PUMP
Back to top