Fuel injectors
  1. Home
  2. fuel
  3. #1010488210

101048-8210 ZEXEL F 01G 29M 01K BOSCH FUEL-INJECTION PUMP f01g29m01k 1010488210


 

Information fuel-injection pump

BOSCH F 01G 29M 01K f01g29m01k
ZEXEL 101048-8210 1010488210
101048-8210 FUEL-INJECTION PUMP
Rating:
27
Buy FUEL-INJECTION PUMP 101048-8210 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

PUMP HOUSING
1. [1] 131062-7820 PUMP HOUSING
1/30. [3] 029040-6020 STUD
1/35A. [1] 131400-0100 ADAPTOR
1/40. [1] 131002-2000 ADAPTOR
2. [1] 131028-6220 COVER
2/2. [1] 131011-1900 GASKET
3. [2] 131017-1000 FLAT-HEAD SCREW
5. [2] 029340-6020 GASKET
16. [4] 131034-1401 CAPSULE
21. [3] 139206-0400 UNION NUT
23. [1] 029633-1010 O-RING
30. [4] 131154-2120 PLUNGER-AND-BARREL ASSY A263
36. [4] 131160-2820 DELIVERY-VALVE ASSEMBLY 11A
37. [4] 131112-2300 COILED SPRING
40. [4] 131115-1600 GASKET
41. [4] 131116-7600 FITTING
42. [4] 131117-2300 FILLER PIECE
45. [2] 131122-0520 PLATE
49. [4] 029632-0030 O-RING
55. [4] 131200-0220 TAPPET
55/2. [4] 131203-0200 BEARING PIN
55/3. [4] 131204-1000 ROLLER
55/4. [4] 131205-0500 BUSHING
55/5. [4] 131206-0200 SLIDER
56/1. [0] 029311-0020 SHIM D19&10T0.30
56/1. [0] 029311-0030 SHIM D19&10T0.40
56/1. [0] 029311-0040 SHIM D19&10T0.50
56/1. [0] 029311-0050 SHIM D19&10T0.6
56/1. [0] 029311-0060 SHIM D19&10T0.7
56/1. [0] 029311-0070 SHIM D19&10T0.8
56/1. [0] 029311-0080 SHIM D19&10T0.9
56/1. [0] 029311-0090 SHIM D19&10T1
56/1. [0] 029311-0110 SHIM D19&10T1.1
56/1. [0] 029311-0120 SHIM D19&10T1.2
56/1. [0] 029311-0130 SHIM D19&10T1.3
56/1. [0] 029311-0140 SHIM D19&10T1.4
56/1. [0] 029311-0270 SHIM D19&10T0.55
56/1. [0] 029311-0280 SHIM D19&10T0.65
56/1. [0] 029311-0290 SHIM D19&10T0.75
56/1. [0] 029311-0310 SHIM D19&10T0.85
56/1. [0] 029311-0320 SHIM D19&10T0.95
56/1. [0] 029311-0330 SHIM D19&10T1.05
56/1. [0] 029311-0340 SHIM D19&10T1.15
56/1. [0] 029311-0350 SHIM D19&10T1.25
56/1. [0] 029311-0490 SHIM D19&10T1.5
56/1. [0] 029311-0500 SHIM D19&10T1.6
56/1. [0] 029311-0580 SHIM D19&10T0.2
56/1. [0] 029311-0590 SHIM D19&10T0.25
56/1. [0] 029311-0600 SHIM D19&10T0.35
56/1. [0] 029311-0610 SHIM D19&10T0.45
56/1. [0] 029311-0620 SHIM D19&10T1.35
56/1. [0] 029311-0630 SHIM D19&10T1.45
56/1. [0] 029311-0710 SHIM D19&10T1.55
61. [4] 131215-2500 COMPRESSION SPRING
62. [4] 131216-0100 SLOTTED WASHER
63. [4] 131217-0200 SLOTTED WASHER
67. [1] 131254-0000 CONTROL RACK
68. [1] 131226-0300 FLAT-HEAD SCREW
76. [4] 131240-0100 PINION
77. [4] 131241-0100 CONTROL SLEEVE
78. [4] 131242-0100 FLAT-HEAD SCREW
90. [1] 131360-1900 CAMSHAFT
91A. [1] 016630-2030 BEARING PLATE HR30203J(NSK)
91B. [1] 028201-7020 BEARING PLATE 4T-30203E1(TOYO)
91E. [1] 016630-2030 BEARING PLATE HR30203J(NSK)
91F. [1] 028201-7020 BEARING PLATE 4T-30203E1(TOYO)
92. [1] 131302-0300 SPACER RING
92A. [1] 131302-0300 SPACER RING
93/1. [0] 029311-7010 SHIM D22&17T0.1
93/1. [0] 029311-7020 SHIM D22&17T0.12
93/1. [0] 029311-7030 SHIM D22&17T0.14
93/1. [0] 029311-7040 SHIM D22&17T0.16
93/1. [0] 029311-7050 SHIM D22&17T0.18
93/1. [0] 029311-7060 SHIM D22&17T0.5
93/1. [0] 029311-7070 SHIM D22&17T1.0
93/1. [0] 029311-7090 SHIM D22&17T0.3
93/1. [0] 029311-7210 SHIM D22&17T0.7
93/1. [0] 029311-7220 SHIM D22&17T1.4
93/1. [0] 139417-0000 SHIM D22&17T2.4
93A/1. [0] 029311-7010 SHIM D22&17T0.1
93A/1. [0] 029311-7020 SHIM D22&17T0.12
93A/1. [0] 029311-7030 SHIM D22&17T0.14
93A/1. [0] 029311-7040 SHIM D22&17T0.16
93A/1. [0] 029311-7050 SHIM D22&17T0.18
93A/1. [0] 029311-7060 SHIM D22&17T0.5
93A/1. [0] 029311-7070 SHIM D22&17T1.0
93A/1. [0] 029311-7090 SHIM D22&17T0.3
93A/1. [0] 029311-7210 SHIM D22&17T0.7
93A/1. [0] 029311-7220 SHIM D22&17T1.4
93A/1. [0] 139417-0000 SHIM D22&17T2.4
101A. [1] 131330-6200 COVER
104A. [4] 020006-1440 BLEEDER SCREW
112A. [1] 025803-1640 WOODRUFF KEY
117A. [1] 029731-4080 EYE BOLT
131. [1] 131424-1520 OVER FLOW VALVE
334. [1] 029731-0490 EYE BOLT
336. [3] 026510-1340 GASKET

Include in #1:

101481-9380 as FUEL INJECTION PUMP
101603-9630 as _

Cross reference number

Zexel num
Bosch num
Firm num
Name
101048-8210 
F 01G 29M 01K 
NP-PES4A85C412RS2000 
  NISSAN-DIESEL
FUEL-INJECTION PUMP
Q




Information:

start by:a) remove turbocharger 1. Put the turbocharger in position on tool (A).2. Put a mark on the compressor cover and housings for installation purpose.3. Remove bolts (1) and plates from compressor housing.4. Remove the compressor housing. 5. Remove bolts (2) and locks from turbine housing. 6. Remove cartridge (3) from turbine housing.7. Install tool (B) in tool (C). Install cartridge in tool (C).8. Remove nut (4) from the compressor wheel.
When the nut is loosened, do not put a side force on the shaft.
9. Install tool (D) on an oil heater. Heat the oil to 350°F (177°C). Install the cartridge on tool (D) with only the compressor wheel in the hot oil. Keep the compressor wheel in the hot oil for ten minutes. 10. Put tool (D) and cartridge on tool (E) under a press. Install driver (F) and push the shaft out of the compressor wheel. Step 10 must be done before the compressor wheel gets cold.11. Remove compressor wheel and shroud. Remove turbine wheel and shaft. 12. Remove the four bolts (5) and locks from plate (6). 13. Remove plate (6), spacer, collar and thrust bearing from cartridge.14. Remove seal from plate and ring from spacer. 15. Remove bearing (7), washer (11) and snap ring (8) from compressor side of cartridge.16. Remove snap ring (13), washer (10), bearing (12) and snap ring (9) from turbine side of cartridge.17. Check all the parts of the turbocharger for damage. If the parts have damage, use new parts for replacement. See SPECIAL INSTRUCTION, Form No. SMHS6854 for TURBOCHARGER RECONDITIONING. Also see GUIDELINE FOR REUSABLE PARTS, Form No. SEBF8018.Assemble Turbocharger (Airesearch T18)
1. Make sure all oil passages are open and clean. Put clean engine oil on all parts before assembly 2. Install snap ring (6), bearing (3), washer (7) and snap ring (4) in turbine side of cartridge. Install the two snap rings with tool (A). Install the snap rings with the rounded edge toward the bearing.3. Install snap ring (2), washer (5) and bearing (1) in compressor side of cartridge. 4. Install seal (12) on plate (8) and ring (9) on spacer.5. Install collar (10) in plate and spacer (11) in collar. 6. Install thrust bearing (13) with the three radial grooves toward the outside.7. Install plate (8), bolts and locks. Tighten bolts to a torque of 35 5 lb. in. (4.0 0.6 N m). Put 6V2055 High Vacuum Grease in the groove for seal ring (14) at assembly to one half or more of the depth of the groove all the way around.8. Install ring (14) on turbine wheel.9. Install turbine wheel and shaft in cartridge. Be careful not to break ring (14) when installing shaft. 10. Put cartridge on tool (C) and tool (C) on tool (B). Some compressor wheels (15) can be installed at room temperature. If the compressor wheel will go on the turbine shaft freely to within .31 in. (7.9 mm) of the seal carrier the compressor wheel can be installed at

Have questions with 101048-8210?





Group cross 101048-8210 ZEXEL

Nissan-Diesel 

101048-8210  
F 01G 29M 01K 
NP-PES4A85C412RS2000 
 
FUEL-INJECTION PUMP
Back to top