101040-8930 ZEXEL 9 410 611 343 BOSCH FUEL-INJECTION PUMP 9410611343 1010408930

Information fuel-injection pump

BOSCH 9 410 611 343 9410611343

ZEXEL 101040-8930 1010408930

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy FUEL-INJECTION PUMP 101040-8930 zexel genuine, new aftermarket engine parts with delivery

Scheme ###:

1.	[1]	131064-0720	PUMP HOUSING
1/30.	[3]	029040-6020	STUD
1/35A.	[1]	131400-0100	ADAPTOR
1/40.	[1]	131002-2000	ADAPTOR
1/40A.	[1]	131420-0420	BLEEDER SCREW
2.	[1]	131028-6220	COVER
2/2.	[1]	131011-1900	GASKET
3.	[2]	131017-1000	FLAT-HEAD SCREW
5.	[2]	029340-6020	GASKET D10&6.5T1.00
16.	[4]	131034-1401	CAPSULE
21.	[3]	139206-0400	UNION NUT
23.	[1]	139731-0000	O-RING
30.	[4]	131154-3020	PLUNGER-AND-BARREL ASSY
36.	[4]	131160-4720	DELIVERY-VALVE ASSEMBLY
37.	[4]	131112-3500	COMPRESSION SPRING
40.	[4]	131115-1600	GASKET
41.	[4]	131116-7600	FITTING
42.	[4]	131117-2300	FILLER PIECE
45.	[2]	131122-0520	PLATE
49.	[4]	029632-0030	O-RING
55.	[4]	131200-2820	TAPPET
55/2.	[1]	131203-0800	BEARING PIN
55/3.	[1]	131204-1000	ROLLER
55/4.	[1]	131205-0500	BUSHING
55/5.	[1]	131206-0200	SLIDER
56/1.	[0]	029311-0020	SHIM D19&10T0.30
56/1.	[0]	029311-0030	SHIM D19&10T0.40
56/1.	[0]	029311-0040	SHIM D19&10T0.50
56/1.	[0]	029311-0050	SHIM D19&10T0.6
56/1.	[0]	029311-0060	SHIM D19&10T0.7
56/1.	[0]	029311-0070	SHIM D19&10T0.8
56/1.	[0]	029311-0080	SHIM D19&10T0.9
56/1.	[0]	029311-0090	SHIM D19&10T1
56/1.	[0]	029311-0110	SHIM D19&10T1.1
56/1.	[0]	029311-0120	SHIM D19&10T1.2
56/1.	[0]	029311-0130	SHIM D19&10T1.3
56/1.	[0]	029311-0140	SHIM D19&10T1.4
56/1.	[0]	029311-0270	SHIM D19&10T0.55
56/1.	[0]	029311-0280	SHIM D19&10T0.65
56/1.	[0]	029311-0290	SHIM D19&10T0.75
56/1.	[0]	029311-0310	SHIM D19&10T0.85
56/1.	[0]	029311-0320	SHIM D19&10T0.95
56/1.	[0]	029311-0330	SHIM D19&10T1.05
56/1.	[0]	029311-0340	SHIM D19&10T1.15
56/1.	[0]	029311-0350	SHIM D19&10T1.25
56/1.	[0]	029311-0490	SHIM D19&10T1.5
56/1.	[0]	029311-0500	SHIM D19&10T1.6
56/1.	[0]	029311-0580	SHIM D19&10T0.2
56/1.	[0]	029311-0590	SHIM D19&10T0.25
56/1.	[0]	029311-0600	SHIM D19&10T0.35
56/1.	[0]	029311-0610	SHIM D19&10T0.45
56/1.	[0]	029311-0620	SHIM D19&10T1.35
56/1.	[0]	029311-0630	SHIM D19&10T1.45
56/1.	[0]	029311-0710	SHIM D19&10T1.55
61.	[4]	131215-2600	COMPRESSION SPRING
62.	[4]	131216-0100	SLOTTED WASHER
63.	[4]	131217-0200	SLOTTED WASHER
67.	[1]	131254-0000	CONTROL RACK
68.	[1]	131226-0300	FLAT-HEAD SCREW
76.	[4]	131240-0100	PINION
77.	[4]	131241-0100	CONTROL SLEEVE
78.	[4]	131242-0100	FLAT-HEAD SCREW
90.	[1]	131361-2300	CAMSHAFT
91A.	[1]	016640-2030	BEARING PLATE
91B.	[1]	028202-0020	BEARING PLATE
91E.	[1]	016630-2030	BEARING PLATE
91F.	[1]	028201-7020	BEARING PLATE
92.	[1]	131302-0300	SPACER RING
92A.	[1]	131302-1000	SPACER RING
93/1.	[0]	029311-7010	SHIM D22&17T0.1
93/1.	[0]	029311-7020	SHIM D22&17T0.12
93/1.	[0]	029311-7030	SHIM D22&17T0.14
93/1.	[0]	029311-7040	SHIM D22&17T0.16
93/1.	[0]	029311-7050	SHIM D22&17T0.18
93/1.	[0]	029311-7060	SHIM D22&17T0.5
93/1.	[0]	029311-7070	SHIM D22&17T1.0
93/1.	[0]	029311-7090	SHIM D22&17T0.3
93/1.	[0]	029311-7210	SHIM D22&17T0.7
93/1.	[0]	029311-7220	SHIM D22&17T1.4
93/1.	[0]	139417-0000	SHIM D22&17T2.4
93A/1.	[0]	029312-0220	SHIM D27&20T0.1
93A/1.	[0]	029312-0230	SHIM D27&20T0.12
93A/1.	[0]	029312-0240	SHIM D27&20T0.14
93A/1.	[0]	029312-0250	SHIM D27&20T0.16
93A/1.	[0]	029312-0260	SHIM D27&20T0.18
93A/1.	[0]	029312-0270	SHIM D27&20T0.5
93A/1.	[0]	029312-0290	SHIM D27&20T0.3
93A/1.	[0]	029312-0300	SHIM D27&20T1.0
93A/1.	[0]	139420-0400	SHIM D27&20T0.7
95.	[2]	131306-1000	BEARING SHELL
96.	[4]	029050-5010	FLAT-HEAD SCREW M5P0.8L32
97.	[4]	026505-0940	GASKET
101A.	[1]	131330-1300	COVER
104A.	[4]	020006-2040	BLEEDER SCREW M6P1L20 4T
106A.	[1]	131321-1900	GASKET
112A.	[1]	029470-4030	WOODRUFF KEY
117A.	[1]	139814-0000	EYE BOLT
118A.	[2]	139514-0000	GASKET D19.2&14.2T1.0
131.	[1]	134424-3920	OVER FLOW VALVE
133.	[1]	139514-0000	GASKET D19.2&14.2T1.0
191.	[1]	131460-2320	BRACKET
191/2.	[4]	029041-0010	STUD
192.	[1]	139775-0200	O-RING
194.	[4]	014011-0140	PLAIN WASHER D22&10.5T1.6
195.	[4]	014111-0440	LOCKING WASHER
196.	[4]	131465-0000	UNION NUT
197.	[1]	029111-6000	CAPSULE
198.	[1]	139516-0100	GASKET
334.	[1]	139810-0000	EYE BOLT
336.	[2]	139510-0000	GASKET D15.2&10.2T1.0

Include in #1:

101401-4171 as FUEL INJECTION PUMP

106871-5470 as _

Cross reference number

Zexel num

Bosch num

Firm num

Name

101040-8930

9 410 611 343
NP-PES4A95C412LS2S

FUEL-INJECTION PUMP
Q

Information:

Introduction
This Special Instruction is intended for the installation of the 366-9748 Injector Wiring Harness Kit . The 366-9748 Injector Wiring Harness Kit can be used to repair TPI connectors. TPI connectors can be found on HEUI injectors, variable valve actuators, and Cat Brakes.Removal of the Connector From the Wire Harness
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9150 Terminal Crimp Tool As 1
B 9U-6070
or Heat Gun Gp
(110V) 1
9U-6072 Heat Gun Gp (220 V) The following steps will remove the connector for an injector from the wire harness that is under the valve mechanism cover.
Illustration 1 g01035448
(1) Side "A" of the connector (2) Side "B" of the connectorNote: Side "A" or side "1" of the connector is the output signal wire from the ECM. Side"B" or side "2" of the connector is the sensor return.
Identify side "A" of the connector and identify side "B" of the connector.
Mark each wire on the wire harness before the wires are cut. Most connectors will have the label of an "A" and a "B". Some connectors may have a "1" and a "2" that is on the connector. The label with a "1" will be an "A". The label with a "2" will be a "B".
Illustration 2 g01034438
Connector that is cut from the wire harness (3) Wire on side "A" of the connector (4) Wire on side "B" of the connector
Cut wire (3) at a distance of 45 mm (1.8 inch).
Cut wire (4) at a distance of 40 mm (1.6 inch).
Illustration 3 g01034450
(5) Wire from the harness for side "B" on the connector (6) Wire from the harness for side "A" on the connectorNote: The wires on the old connector are cut to length so that the wires on the wire harness to the new connector will match up. The proper length will help in matching the harness wires to the wires on the new connector wires.
Discard the connector.Installation Procedure for the Connector
Use Tool (A) to strip the plastic off wires (5) and (6) at a distance of 5 mm (0.19 inch).
Illustration 4 g01034451
Connecting the connector to the wire harness (5) Wire from the harness for side "B" on the connector (6) Wire from the harness for side "A" on the connector (7) Heat shrink tube (8) Butt splice on wire (4) that is on side "B" of the connector (9) Butt splice on wire (3) that is on side "A" of the connector
Use the heat shrink tubes from 366-9748 Injector Wiring Harness Kit . Slide the heat shrink tubes toward the connector in order to expose the butt splices.
Take wire (5) and slide wire (5) in the butt splice (8).
Take wire (6) and slide wire (6) in the butt splice (9).
Illustration 5 g01035814
Illustration 6 g01034452
(8) Butt splice on wire (4) that is on side "B" of the connector (9) Butt splice on wire (3) that is on side "A" of the connector
Use Tool