154101-0320 ZEXEL 9 421 611 737 BOSCH FLYWEIGHT ASSEMBLY 9421611737 1541010320 223041440a


 

Information flyweight assembly

BOSCH 9 421 611 737 9421611737
ZEXEL 154101-0320 1541010320
HINO 223041440A 223041440a
154101-0320 FLYWEIGHT ASSEMBLY
Rating:
9
Buy FLYWEIGHT ASSEMBLY 154101-0320 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
154101-0320 
9 421 611 737 
223041440A  HINO
FLYWEIGHT ASSEMBLY
C 14GJ FLYWEIGHT ASSY GOV
154101-0320 
9 421 611 737 
ME717388  MITSUBISHI
FLYWEIGHT ASSEMBLY
C 14GJ FLYWEIGHT ASSY GOV




Information:

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Note: The standard work for the laser mark has been updated.Problem
Illustration 1 g06273667During laser marking on these Reman 3400 HEUI injectors both Prime and Non-Prime injectors were marked with NP. This caused confusion with dealers and customers. The NP is thought to mean "Non-Prime" and the injectors are Prime injector part numbers. The prime injectors marked incorrectly with NP but were built and tested to the correct Prime part number and should be used in fuel systems for prime injectors. Dealers can remove the two letters if they decide the two letters cause too much confusion.Solution
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Illustration 2 g06273668
Prime HEUI injector
NP stands for "Non-Prime". Going forward only "Non-Prime" 3400 HEUI injectors will have the NP laser mark.

Have questions with 154101-0320?





Group cross 154101-0320 ZEXEL

Hino 

154101-0320  
9 421 611 737 
223041440A 
FLYWEIGHT ASSEMBLY

Mitsubishi 

154101-0320  
9 421 611 737 
ME717388 
FLYWEIGHT ASSEMBLY
Back to top