154421-9420 ZEXEL Cross 1544219420


 

Information

ZEXEL 154421-9420 1544219420
154421-9420 None
Rating:
14
Buy None 154421-9420 zexel genuine, new aftermarket engine parts with delivery

Include in ###:

Number on scheme 65
MANIFOLD-PRESSURE COMP.
1054905910 as MANIFOLD-PRESSURE COMP.

Cross reference number

Zexel num
Bosch num
Firm num
Name
154421-9420 
 
   

14GJ BOOST COMPENSATOR GOV




Information:

(1) Bore in the rear bearing for the camshaft (new) ... 60.325 0.013 mm (2.3750 .0005 in) Diameter of rear bearing surface (journal) of the camshaft (new) ... 60.249 0.013 mm (2.3720 .0005 in)Maximum permissible clearance between the bearing and the camshaft bearing surface (journal) (worn) ... 0.15 mm (.006 in)(2) Torque for screws that hold sleeve control levers ... 2.8 0.2 N m (24 2 lb in)(3) Bore in the housing for the fuel control shaft (new) ... 8.999 0.013 mm (.3543 .0005 in) Diameter of sleeve control shaft (new) ... 8.966 0.008 mm (.3530 .0003 in)Maximum permissible clearance between the bore in the housing and the sleeve control shaft (worn) ... 0.08 mm (.003 in)(4) End play for camshaft with sleeve installed (new) ... 0.58 0.46 mm (.023 .018 in) When installing sleeve on end of camshaft, support the camshaft to prevent damage to parts inside of injection pump and governor housing.(5) Bore in the front bearing for the camshaft (new) ... 25.413 0.013 mm (1.0005 .0005 in) Diameter of front bearing surface (journal) of the camshaft (new) ... 25.375 0.013 mm (.9990 .0005 in)Maximum permissible clearance between the bearing and the camshaft bearing surface (journal) (worn) ... 0.10 mm (.004 in) (6) Torque for bushing ... 82 7 N m (60 5 lb ft)(7) Crossover levers. For adjustment of crossover levers, see the Testing And Adjusting Section.(8) Torque for screws that hold crossover levers ... 2.8 0.2 N m (24 2 lb in)(9 and 10) Fuel control shafts.(11) Dowel pin (linkage between crossover levers).(12) Distance guide pin extends into bore ... 1.20 0.10 mm (.047 .004 in) Install guide pin with slot toward the top of the lifter bore.(13) 9N5862 Spring for injection pump: Length under test force ... 35.13 mm (1.383 in)Test force ... 56.7 6.6 N (12.4 1.4 lb)Free length after test ... 40.80 mm (1.606 in)Outside diameter ... 18.49 mm (.728 in)A. Reverse Flow Check Valve (RFC).B. Orificed Delivery Valve (ODV).C. Orificed Delivery Valve-Lo Volume (ODV).D. Orificed Reverse Flow Check Valve (ORFC).

Have questions with 154421-9420?





Group cross 154421-9420 ZEXEL

154421-9420  
 
 

Back to top