105407-7790 ZEXEL Cross 1054077790


 

Information

ZEXEL 105407-7790 1054077790
105407-7790 None
Rating:
47
Buy None 105407-7790 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105407-7790 
 
   





Information:

Dealer S.O.S. Lab Information:
The SOS Infrared Analysis limit for Allowable Soot is 100% and should be used for all oils. If Caterpillar-brand DEO CF-4 oil is used, then a maximum limit of 130% soot can be used for the 950F. This 130% allowable soot limit does NOT apply to other brands of CF-4 oil because the level of soot dispersent additives in other brands of oil is unknown and varies considerably. Of course, other oil conditions such as wear metal content, "dirt", oxidation, fuel dilution, etc. should also be monitored.
Customer Information
Advise Customers and maintenance personnel of the following information:
These engine updates are intended to reduce 950F engine oil sooting/sludging during the recommended 250 hour engine oil/filter change interval.
1. After this Update, the oil refill is 31 Liters (8.25 U.S. Gallons, or 7.0 Imperial Gallons) due to the new larger engine oil pan and new oil level gauge (dipstick) which raises the liquid level slightly. The former engine oil refill capacity was 20 Liters (5.2 U.S. Gallons, 4.4 Imperial Gallons). Failure to install the new larger quantity of oil may result in oil starvation and engine damage. Customers should inform their maintenance personnel of the new larger Engine Crankcase capacity.2. The recommended engine oil/filter change interval is 250 hours, and should NOT be exceeded, even with the new larger oil capacity. The recommended oil is API Specification CF-4, which has more dispersant additives than either CE or CD oils. If Caterpillar-brand oil is used, be sure to use DEO CF-4 instead of DEO CD.3. If an oil other than API Specification CF-4 is used, such as CD, or CCMC-D4 in Europe, then the engine oil/filter change interval should be shortened. Monitor oil condition with Scheduled Oil Sampling (S-O-S), including Infrared analysis to determine soot level, and establish an acceptable oil/filter change interval.4. Applications at altitudes over 1525 M (5000 feet) may need to use somewhat shorter engine oil/filter intervals. Caterpillar recommends the use of S-O-S, including infrared analysis, to monitor engine oil condition, including soot. The recommendations concerning shorter engine oil and filter change intervals when using of high-sulphur fuel have not changed.5. For machines which have been experiencing excessive sooting or sludging of the engine oil, Caterpillar recommends that customers temporarily shorten the engine oil and filter change interval to approximately 100 hours for the next 300 hours of operation to allow the fresh engine oil to loosen & dissolve any existing soot deposits that may still be inside the engine. Then, return to the recommended oil and filter change interval of 250 hours (also see items 3 and 4 above).
Illustration 1
Illustration 2
VALVE COVER TIGHTENING SEQUENCE Illustration 3
Illustration 4
Illustration 5For Machines With S/N Prefixes Of 4DJ, 7ZF, Or 5SK
Illustration 6For Machines With S/N Prefixes Of 6YG, 5PJ, Or 6LJ
Illustration 7

Have questions with 105407-7790?





Group cross 105407-7790 ZEXEL

F 019 Z2F 588 
 
GOVERNOR

Hino 

 
223205210A 
GOVERNOR
 
223205210B 
GOVERNOR
9 420 614 913 
NP-EP/RSV200-1300PQ39C4 
 
GOVERNOR
F 019 Z1E 913 
NP-EP/RSV200-1350PQ49C4 
 
GOVERNOR

Isuzu 

F 019 Z1E 922 
1157900840 
GOVERNOR
F 019 Z2E 022 
NP-EP/RSV200-1350PQ49C312 
1157900841 
GOVERNOR
F 019 Z1E 909 
1157900850 
GOVERNOR
F 019 Z3E 020 
NP-EP/RSV200-1350PQ49C311K 
1157900851 
GOVERNOR
 
 

 
 

 
 

 
 
GOVERNOR
F 019 Z2E 534 
 
GOVERNOR
F 019 Z2E 681 
 
GOVERNOR
F 019 Z3E 354 
NP-EP/RSV200-1350PQ49C4 
 
GOVERNOR

Isuzu 

F 019 Z1E 923 
NP-EP/RSV200-1350PQ49C311K 
1157900960 
GOVERNOR
105407-7790  
 
 

Back to top