105100-5060 ZEXEL 9 430 610 860 BOSCH 9430610860 1051005060


 

Information

BOSCH 9 430 610 860 9430610860
ZEXEL 105100-5060 1051005060
105100-5060 None
Rating:
61
Buy None 105100-5060 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
105100-5060 
9 430 610 860 
31-5380 
   

MH50 *




Information:

Fuel consumption complaints are related to engine owners expectations. They may often times be related to the engine itself, causes other than the engine, and in some cases the fuel consumption may be normal for the application. Only a good discussion with the owner/operator, as described in the "Owner/Operator Input" section, will give guidance as to a correct repair or to prevent unnecessary repairs.Owner/Operator Input
The following are some of the questions which should be asked before beginning any diagnosis or repair for an engine performance complaint. There Are No Hard And Fast Answers For These Questions. There are many factors that can cause poor fuel mileage or make users believe they are getting fuel-poor-mileage.There are also a variety of customer expectations which are acceptable. The answers to these questions will give you a better understanding and perspective on the complaint and may identify characteristics which will help pinpoint the cause of the complaint quickly.1. Are miles measured accurately? A most common problem in determining mpg is errors in recording the number of miles traveled.A. Is this vehicle hub or cab odometer accurate? The easiest way to check an odometer is to install a hub odometer known to be accurate and for the tire size on the truck. Run the truck over several hundred miles and compare the reading with the original odometer.Odometers may also be checked by comparing them to interstate mile posts or by running over a course of known length - a 50-mile run is required to get a good check.B. Are "book miles" or "driver-paid miles" correct? Another way in which miles for mpg calculations are obtained by a fleet is the use of "book miles" or "driver-paid miles". The use of this system can short mileage accumulation by 10 to 15%; thus, mpg is low by 10 to 15%.C. Is the vehicle used for pick-up and delivery operation? Another problem affecting mileage accumulation in many fleets is the use of linehaul equipment for pickup and delivery operations. In the "book mile" system, the truck rarely gets credit for any miles run in pick-up and delivery.2. Is fuel measurement accurate? There are a number of ways in which fuel measurement can be the source of mpg problems.A. Are fuel pumps calibrated? If fuel tickets come from company-owned fuel pumps, there can be errors because nonrevenue fuel pumps do not have calibration requirements in many states.B. Are road fuel tickets accurate? The only way to verify fuel additions when road fuel tickets are used is a laborious ticket-by-ticket audit ensuring that the correct amount of fuel has been entered for the vehicles in question and that there are no indications of incorrect entries.C. Are tank-full mileage checks correctly done? The big problem in "tank-full" checks is getting the tank filled to the same level before and after the user "checked the mileage". With two 100 gallon tanks, errors of 5 to 10 gallons are very common in topping off tanks because of the way truck tanks

Have questions with 105100-5060?





Group cross 105100-5060 ZEXEL

Komatsu 

9 430 610 851 
31-4360E 
6137113200 
NOZZLE AND HOLDER ASSY.
D105

Hino 

9 430 610 852 
31-4400 
236001460A 
NOZZLE AND HOLDER ASSY.
EH700
9 430 610 853 
31-4401 
236001460B 
NOZZLE AND HOLDER ASSY.
EH700

Isuzu 

9 430 610 854 
31-3660 
1153000920 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 855 
31-3661 
1153001060 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 856 
30-3130 
1153001061 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 612 973 
30-3201 
1153001062 
NOZZLE AND HOLDER ASSY.
6BD1

Hino 

9 430 610 078 
31-5300F 
236001221A 
NOZZLE AND HOLDER ASSY.
EK100
9 430 612 972 
31-5300122 
S236001221 
NOZZLE AND HOLDER ASSY.
EK100
9 430 612 972 
31-5300122 
236001221C 
NOZZLE AND HOLDER ASSY.
EK100
9 430 610 857 
31-5370 
236001480A 
NOZZLE AND HOLDER ASSY.
EF700T

Isuzu 

 
1153000911 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 024 
31-3681 
1153001050 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 858 
30-3140 
1153001051 
NOZZLE AND HOLDER ASSY.
6BD1
9 430 610 859 
30-3201T 
1153001052 
NOZZLE AND HOLDER ASSY.
6BD1
105100-5060  
9 430 610 860 
31-5380 
 

MH50

Komatsu 

9 430 610 861 
31-4410D 
6138113200 
NOZZLE AND HOLDER ASSY.
SA6D110

Kubota 

9 430 610 862 
31-3690 
1912953001 
NOZZLE AND HOLDER ASSY.
ER1700
9 430 610 862 
31-3690 
 
NOZZLE AND HOLDER ASSY.
ER1700
9 430 610 863 
31-3691Q 
1912953002 
NOZZLE AND HOLDER ASSY.
ER1700
9 430 610 864 
31-3521I 
 
NOZZLE AND HOLDER ASSY.
9 430 610 865 
31-3522I 
 
NOZZLE AND HOLDER ASSY.
9 430 610 866 
31-38101 
EZ41056 
NOZZLE AND HOLDER ASSY.
6A
Back to top