Information diaphragm housing
BOSCH
9 443 612 127
9443612127
ZEXEL
158507-1820
1585071820

Rating:
Include in ###:
Cross reference number
Zexel num
Bosch num
Firm num
Name
158507-1820
9 443 612 127
DIAPHRAGM HOUSING
C 35XX HOUSING Hydraulic parts Others
C 35XX HOUSING Hydraulic parts Others
Information:
Note: Each CCM will support up to a total of eight lists for all GSC's and ECM's. Each list may contain up to eight PID's. The CCM will support up to 64 parameters. However, the total number of PID's able to be broadcast is limited to 48 per controller. Refer to Operation and Maintenance Manual, SEBU6874, "Programming Examples for M5X Protocol".Note: For the older version of CCM, 117-6170 System Communication Module, the total number of PID's able to be broadcast is limited to 31 per module.IID 15 - Status Reply to IID 11, IID 12, and IID 13
This IID is used in order to indicate the validity of a command message that was just sent to the CCM. A typical IID 15 example is: $5001150100cs.
Table 6
IID 15 - Status Reply to IID 11, IID 12, and IID 13
Byte(s) Description
1-4 Standard preamble (50 xxyyzz)
5 IID sent in response to (11, 12, or 82)
6 Status Reply
$00 = IID data is OK
$10 = Invalid list number (greater than 8 or less than 1)
$20 = List is not programmed
$30 = Faulty checksum or command format
7 Checksum of message followed by an ASCII carriage return ($0D) IID 24
This IID is used in order to indicate the validity of a command message that was just sent to the CCM. A typical IID 15 example is: $5001150100cs.
Table 6
IID 15 - Status Reply to IID 11, IID 12, and IID 13
Byte(s) Description
1-4 Standard preamble (50 xxyyzz)
5 IID sent in response to (11, 12, or 82)
6 Status Reply
$00 = IID data is OK
$10 = Invalid list number (greater than 8 or less than 1)
$20 = List is not programmed
$30 = Faulty checksum or command format
7 Checksum of message followed by an ASCII carriage return ($0D) IID 24
Have questions with 158507-1820?
Group cross 158507-1820 ZEXEL
158507-1820
9 443 612 127
DIAPHRAGM HOUSING