Information injector assy, pie
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
DIESEL PIEZO FUEL INJECTOR 295900-0200, 295900-0250, 23670-30440, 23670-39435
BSZBAS OEM NO. : 23670 39435, 2367039435 23670 30440, 2367030440 || The maintenance and upkeep of fuel injectors are very important || Fuel impurities may cause fuel injector blockage || It is recommended to drive 20000 kilometers or replace it every two years || Ensure its normal operation
BSZBAS OEM NO. : 23670 39435, 2367039435 23670 30440, 2367030440 || The maintenance and upkeep of fuel injectors are very important || Fuel impurities may cause fuel injector blockage || It is recommended to drive 20000 kilometers or replace it every two years || Ensure its normal operation
Common Rail Injector 23670-30440 23670-39435 Diesel Fuel Injector 295900-0200 295900-0250 Compatible With Hiace Dyna 1KD-FTV
LJBljf Long service life, reducing maintenance costs. || Smooth acceleration, precise fuel injection, and efficient atomization. || Improve fuel efficiency, make fuel more abundant, and achieve fuel efficiency. || Boosting power, fuel-efficient and durable, resistant to high temperatures and corrosion. || Common Rail Injector 23670-30440 23670-39435 Diesel Fuel Injector 295900-0200 295900-0250 Compatible With Hiace Dyna 1KD-FTV
LJBljf Long service life, reducing maintenance costs. || Smooth acceleration, precise fuel injection, and efficient atomization. || Improve fuel efficiency, make fuel more abundant, and achieve fuel efficiency. || Boosting power, fuel-efficient and durable, resistant to high temperatures and corrosion. || Common Rail Injector 23670-30440 23670-39435 Diesel Fuel Injector 295900-0200 295900-0250 Compatible With Hiace Dyna 1KD-FTV
Fuel Injector Nozzles OEM 2367030440 2959000200 295900-0200 23670-30440
MAYEPQFAS ⭐ Extend engine life: The fuel injector can ensure the engine to run in the best condition, thus extending its service life. || ⭐ Increase driving comfort: The fuel injector can improve the running state of the engine and make driving more stable and comfortable. || ⭐ Improve vehicle reliability: By using high-quality fuel injectors, the engine can be kept in good running condition for a long time, thus improving vehicle reliability. || ⭐ Improve engine performance: The fuel injector can ensure that fuel is injected into the engine in the best way, thus improving engine performance and fuel economy. || ⭐ Reduce tail gas emissions: The use of fuel injectors can reduce the emission of harmful gases, because fuel is burned more effectively and the emission control system can better control tail gas emissions.
MAYEPQFAS ⭐ Extend engine life: The fuel injector can ensure the engine to run in the best condition, thus extending its service life. || ⭐ Increase driving comfort: The fuel injector can improve the running state of the engine and make driving more stable and comfortable. || ⭐ Improve vehicle reliability: By using high-quality fuel injectors, the engine can be kept in good running condition for a long time, thus improving vehicle reliability. || ⭐ Improve engine performance: The fuel injector can ensure that fuel is injected into the engine in the best way, thus improving engine performance and fuel economy. || ⭐ Reduce tail gas emissions: The use of fuel injectors can reduce the emission of harmful gases, because fuel is burned more effectively and the emission control system can better control tail gas emissions.
You can express buy:
USD 908
03-03-2025
03-03-2025
Susirick 23670-30440 fuel injector nozzle 29590-00200 for hilux 1KD engine diesel 2367030440
USD 229
10-11-2022
10-11-2022
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 29590-00200 | 23670-3044 | INJECTOR ASSY, PIE | |
| 23670-30440-C | TOYOTA | INJECTOR ASSY | |
| 23670-30440 | TOYOTA | INJECTOR ASSY, PIE |
Information:
Cooling System
Do not perform this maintenance until you read and understand the material in the Safety and Cooling System Specifications sections of this publication.This procedure is to be used for normal maintenance of cooling system surfaces to return to "like new" condition. For heavy build-up of scale and deposits, a severe acid-type commercial cleaner or mechanical cleaning will be required.
Refer to the Cooling System Specifications for additional information regarding appropriate Flush/Fill for your application.Clean/Flush Coolant
If changing thermostats prior to this interval, go to step 5, Replace Thermostat, Gaskets and Seal.1. Stop the engine and allow to cool. Loosen the radiator filler cap slowly to relieve any pressure and remove the cap.2. Remove the cooling system drain plug(s) or open the drain valve and allow the coolant to drain. Open the cab heater valve to flush coolant from the cab heater. 3. Remove the drain plug (1) on bottom of water pump housing and/or radiator. Remove the cylinder head drain plug from the engine. Allow coolant to drain.Water Pump Seal
Over concentration of coolant additive (Conditioner), mineral deposits from hard water or cooling system contamination can accelerate the wear on the water pump coolant seal. The cooling system maintenance interval provides an opportunity to inspect and replace the water pump seal if necessary to reduce coolant leakage.Dispose of used engine coolant or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.Contact Caterpillar Service Technology Group:
Outside Illinois: 1-800-542-TOOL
Inside Illinois: 1-800-541-TOOL
Canada: 1-800-523-TOOL
Refer to Service Magazine article dated November 13, 1989 and/or Engine News article dated November 1989 for information regarding disposal and recycling of used coolant.4. Clean and install all drain plugs and/or close drain valve. All tools shown or mentioned in the following Disassembly and Assembly procedure are available at any Caterpillar dealer.Replace Thermostat, Gaskets and Seal
If replacing thermostats ONLY, drain the coolant from the cooling system to a level below the thermostat housing. 5. Loosen the hose clamps and remove the radiator hose from the thermostat housing.6. Remove the thermostat and gasket from the thermostat housing. The thermostats can be reused if they are tested and meet the test specifications below and are not damaged or have excessive buildup of deposits. Thermostats should begin to open and be fully open as indicated in the following chart. Install Thermostat
Caterpillar engines incorporate a shunt design cooling system and require operating the engine with a thermostat installed.
Inspect gaskets before assembly and replace if worn or damaged. 7. Install a new thermostat in the thermostat housing. 8. Install a new gasket and the water outlet pipe on the thermostat housing.9. Install the radiator hose and tighten the hose clamps.
Use of commercially available cooling system cleaners may cause damage to aluminum cooling system components. Use only cooling system cleaners that are approved for engines that have aluminum cooling system and engine components.DO NOT use a cooling system cleaner that contains tri-sodium phosphate;
Do not perform this maintenance until you read and understand the material in the Safety and Cooling System Specifications sections of this publication.This procedure is to be used for normal maintenance of cooling system surfaces to return to "like new" condition. For heavy build-up of scale and deposits, a severe acid-type commercial cleaner or mechanical cleaning will be required.
Refer to the Cooling System Specifications for additional information regarding appropriate Flush/Fill for your application.Clean/Flush Coolant
If changing thermostats prior to this interval, go to step 5, Replace Thermostat, Gaskets and Seal.1. Stop the engine and allow to cool. Loosen the radiator filler cap slowly to relieve any pressure and remove the cap.2. Remove the cooling system drain plug(s) or open the drain valve and allow the coolant to drain. Open the cab heater valve to flush coolant from the cab heater. 3. Remove the drain plug (1) on bottom of water pump housing and/or radiator. Remove the cylinder head drain plug from the engine. Allow coolant to drain.Water Pump Seal
Over concentration of coolant additive (Conditioner), mineral deposits from hard water or cooling system contamination can accelerate the wear on the water pump coolant seal. The cooling system maintenance interval provides an opportunity to inspect and replace the water pump seal if necessary to reduce coolant leakage.Dispose of used engine coolant or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.Contact Caterpillar Service Technology Group:
Outside Illinois: 1-800-542-TOOL
Inside Illinois: 1-800-541-TOOL
Canada: 1-800-523-TOOL
Refer to Service Magazine article dated November 13, 1989 and/or Engine News article dated November 1989 for information regarding disposal and recycling of used coolant.4. Clean and install all drain plugs and/or close drain valve. All tools shown or mentioned in the following Disassembly and Assembly procedure are available at any Caterpillar dealer.Replace Thermostat, Gaskets and Seal
If replacing thermostats ONLY, drain the coolant from the cooling system to a level below the thermostat housing. 5. Loosen the hose clamps and remove the radiator hose from the thermostat housing.6. Remove the thermostat and gasket from the thermostat housing. The thermostats can be reused if they are tested and meet the test specifications below and are not damaged or have excessive buildup of deposits. Thermostats should begin to open and be fully open as indicated in the following chart. Install Thermostat
Caterpillar engines incorporate a shunt design cooling system and require operating the engine with a thermostat installed.
Inspect gaskets before assembly and replace if worn or damaged. 7. Install a new thermostat in the thermostat housing. 8. Install a new gasket and the water outlet pipe on the thermostat housing.9. Install the radiator hose and tighten the hose clamps.
Use of commercially available cooling system cleaners may cause damage to aluminum cooling system components. Use only cooling system cleaners that are approved for engines that have aluminum cooling system and engine components.DO NOT use a cooling system cleaner that contains tri-sodium phosphate;