Information injector assy
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Engine Assembly 8-98110607-2 car diesel fuel injectors 295050-0321
RWFZQKDX Enrgy Saving：Injector Nozzles designed fuel atomization (mist). || Engine Assembly 8-98110607-2 car diesel fuel injectors 295050-0321 || Advanced flow matched fuel injectors promote smooth engine balanced fuel delivery reducing overall fuel consumption and harmful emissions. || Flow Matched Fuel Injectors ensure that each fuel injector is supplying the correct amounts of atomized fuel to each of the engines cylinders consistenly, helpming to aximize the efficiency and of your vehicles engine. || REPLACEMENT FUEL INJECTORS - transfers gas from the tank into the engine cylinders to power for the vehicle. Gas enters the fuel injectors in liquid form then transforms it into a mist then sprays it into the cylinder for efficient and quick burning of fuel.
RWFZQKDX Enrgy Saving：Injector Nozzles designed fuel atomization (mist). || Engine Assembly 8-98110607-2 car diesel fuel injectors 295050-0321 || Advanced flow matched fuel injectors promote smooth engine balanced fuel delivery reducing overall fuel consumption and harmful emissions. || Flow Matched Fuel Injectors ensure that each fuel injector is supplying the correct amounts of atomized fuel to each of the engines cylinders consistenly, helpming to aximize the efficiency and of your vehicles engine. || REPLACEMENT FUEL INJECTORS - transfers gas from the tank into the engine cylinders to power for the vehicle. Gas enters the fuel injectors in liquid form then transforms it into a mist then sprays it into the cylinder for efficient and quick burning of fuel.
shsiyayh 4 PCS Fuel Injector Compatible With Isuzu Engine 295050-0321 295050-0322
shsiyayh Part Name:Fuel Injector || Part Number:295050-0321 295050-0322 2950500321 2950500322 || APPlication: Compatible with Isuzu Engine || 1.Please tell us of your engine model or a view of nameplate when order this item to lower the error rate.Thanks. || 2.There are no instructions included in this kit.it is recommended to install professionally.
shsiyayh Part Name:Fuel Injector || Part Number:295050-0321 295050-0322 2950500321 2950500322 || APPlication: Compatible with Isuzu Engine || 1.Please tell us of your engine model or a view of nameplate when order this item to lower the error rate.Thanks. || 2.There are no instructions included in this kit.it is recommended to install professionally.
6Pcs New Fuel Injector Compatible with Isuzu Diesel Engine 295050-0321 295050-0322
IMIFAFTAbT Product name: Fuel Injector || Warranty:1year || Compatible with Isuzu Engine || Part Number:295050-0321 295050-0322 || Important Note:1.Please double check that this product fits your car before purchasing check your part number,photo. 2.Since the effect of light is different between the display and the display, the actual color may be different from the color of the image.
IMIFAFTAbT Product name: Fuel Injector || Warranty:1year || Compatible with Isuzu Engine || Part Number:295050-0321 295050-0322 || Important Note:1.Please double check that this product fits your car before purchasing check your part number,photo. 2.Since the effect of light is different between the display and the display, the actual color may be different from the color of the image.
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 29505-00321 | 8-98110607 | INJECTOR ASSY |
Information:
Cooling System
Do not perform this maintenance until you read and understand the material in the Safety and Cooling System Specifications sections of this publication.This procedure is to be used for normal maintenance of cooling system surfaces to return to "like new" condition. For heavy build-up of scale and deposits, a severe acid-type commercial cleaner or mechanical cleaning will be required.
Refer to the Cooling System Specifications for additional information regarding appropriate Flush/Fill for your application.Clean/Flush Coolant
If changing thermostats prior to this interval, go to step 5, Replace Thermostat, Gaskets and Seal.1. Stop the engine and allow to cool. Loosen the radiator filler cap slowly to relieve any pressure and remove the cap.2. Remove the cooling system drain plug(s) or open the drain valve and allow the coolant to drain. Open the cab heater valve to flush coolant from the cab heater. 3. Remove the drain plug (1) on bottom of water pump housing and/or radiator. Check water pump breather filter 4N1400 (2) for blockage or debris and replace if necessary.Water Pump Seal
Over concentration of coolant additive (Conditioner), mineral deposits from hard water or cooling system contamination can accelerate the wear on the water pump coolant seal. The cooling system maintenance interval provides an opportunity to inspect and replace the water pump seal if necessary to reduce coolant leakage.Dispose of used engine coolant or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.Contact Caterpillar Service Technology Group:Outside Illinois: 1-800-542-TOOLInside Illinois: 1-800-541-TOOLCanada: 1-800-523-TOOLRefer to Service Magazine article dated November 13, 1989 and/or Engine News article dated November 1989 for information regarding disposal and recycling of used coolant.4. Clean and install all drain plugs and/or close drain valve. All tools shown or mentioned in the following Disassembly and Assembly procedure are available at any Caterpillar dealer.Replace Thermostat, Gaskets and Seal
If replacing thermostats ONLY, drain the coolant from the cooling system to a level below the thermostat housing. 5. Disconnect hose assembly from radiator to thermostat housing assembly.6. Remove six bolts (1) that fasten the thermostat housing to the cylinder head and remove thermostat housing (2) and gaskets. 7. Remove thermostat (3) from the housing. 8. Remove lip-type seal (4) from the housing. Use tooling [Slide Hammer Puller (1P0074), Bearing Cup Puller Attachment (8B7554) and Leg (7S7786)] to remove seal from the housing. The thermostats can be reused if they are tested and meet the test specifications below and are not damaged or have excessive buildup of deposits. Thermostats should begin to open and be fully open as indicated in the following chart. 9. Replace thermostat, gaskets and seal.Install Thermostat
Caterpillar engines incorporate a shunt design cooling system and require operating the engine with a thermostat installed.
Inspect gaskets before assembly and replace if worn or damaged. 10. Install lip-type seal (1) in housing with tooling (A) [Driver Group (1P0510)]. Install the seal with the lip of the seal away from the
Do not perform this maintenance until you read and understand the material in the Safety and Cooling System Specifications sections of this publication.This procedure is to be used for normal maintenance of cooling system surfaces to return to "like new" condition. For heavy build-up of scale and deposits, a severe acid-type commercial cleaner or mechanical cleaning will be required.
Refer to the Cooling System Specifications for additional information regarding appropriate Flush/Fill for your application.Clean/Flush Coolant
If changing thermostats prior to this interval, go to step 5, Replace Thermostat, Gaskets and Seal.1. Stop the engine and allow to cool. Loosen the radiator filler cap slowly to relieve any pressure and remove the cap.2. Remove the cooling system drain plug(s) or open the drain valve and allow the coolant to drain. Open the cab heater valve to flush coolant from the cab heater. 3. Remove the drain plug (1) on bottom of water pump housing and/or radiator. Check water pump breather filter 4N1400 (2) for blockage or debris and replace if necessary.Water Pump Seal
Over concentration of coolant additive (Conditioner), mineral deposits from hard water or cooling system contamination can accelerate the wear on the water pump coolant seal. The cooling system maintenance interval provides an opportunity to inspect and replace the water pump seal if necessary to reduce coolant leakage.Dispose of used engine coolant or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.Contact Caterpillar Service Technology Group:Outside Illinois: 1-800-542-TOOLInside Illinois: 1-800-541-TOOLCanada: 1-800-523-TOOLRefer to Service Magazine article dated November 13, 1989 and/or Engine News article dated November 1989 for information regarding disposal and recycling of used coolant.4. Clean and install all drain plugs and/or close drain valve. All tools shown or mentioned in the following Disassembly and Assembly procedure are available at any Caterpillar dealer.Replace Thermostat, Gaskets and Seal
If replacing thermostats ONLY, drain the coolant from the cooling system to a level below the thermostat housing. 5. Disconnect hose assembly from radiator to thermostat housing assembly.6. Remove six bolts (1) that fasten the thermostat housing to the cylinder head and remove thermostat housing (2) and gaskets. 7. Remove thermostat (3) from the housing. 8. Remove lip-type seal (4) from the housing. Use tooling [Slide Hammer Puller (1P0074), Bearing Cup Puller Attachment (8B7554) and Leg (7S7786)] to remove seal from the housing. The thermostats can be reused if they are tested and meet the test specifications below and are not damaged or have excessive buildup of deposits. Thermostats should begin to open and be fully open as indicated in the following chart. 9. Replace thermostat, gaskets and seal.Install Thermostat
Caterpillar engines incorporate a shunt design cooling system and require operating the engine with a thermostat installed.
Inspect gaskets before assembly and replace if worn or damaged. 10. Install lip-type seal (1) in housing with tooling (A) [Driver Group (1P0510)]. Install the seal with the lip of the seal away from the