Information injector assy
INJECTOR ASSY
AA
- SM295050-018# CANNOT BE SUPPLIED. SPARE PART NUMBER IS
- SM295050-052#(-018# AND A GASKET).

Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1PC 295050-0180 2950500180 AIQFTGSNS
AIQFTGSNS
AIQFTGSNS
You can express buy:
USD 42.99
19-12-2024
19-12-2024
Erikc 295050-0200 295050-0460 Injector Repair Kits Nozzle G3s6 Valve Plate , Pin, Sealing Ring For Denso 295050-0180 295050-0520
Images:
USD 42.99
[10-Nov-2022]
USD 19.99
[10-Nov-2022]
USD 40.99
[10-Nov-2022]
USD 40.99
[10-Nov-2022]
Components :
001. | INJECTOR ASSY | 29505-00180 |
Include in #3:
29505-00180
as INJECTOR ASSY
Cross reference number
Part num | Firm num | Firm | Name |
29505-00180 | SM | INJECTOR ASSY | |
23670-0L090 | TOYOTA | INJECTOR ASSY | |
SM | TOYOTA | INJECTOR ASSY |
Information:
Avoiding hot engine shutdowns will maximize turbocharger shaft and bearing life.Make sure the shutoff procedure is understood. Refer to the OEM truck manufacturer's instructions for your type of engine shutoff system used.Electronic Engines
If your vehicle is equipped with an Electronic engine, DO NOT operate the engine without the rack actuator solenoid (BTM) in place and with the fuel shutoff solenoid disabled. Excessive engine speed (overspeed) may result.
The manual shutoff lever is located on the side of the electronic governor. The engine can be shut OFF by rotating and holding the manual shutoff lever in the counterclockwise (CCW) direction.Rotating and holding the manual shutoff lever in the clockwise (CW) direction overrides the shutoff solenoid. The lever is spring loaded and will return to the neutral position when released.After Stopping the Engine
If freezing temperatures are expected, allow the engine jacket water system to cool; then check the coolant for proper antifreeze protection. The engine must be protected against freezing to the lowest expected outside temperature. Add permanent-type antifreeze if required.
If your vehicle is equipped with an Electronic engine, DO NOT operate the engine without the rack actuator solenoid (BTM) in place and with the fuel shutoff solenoid disabled. Excessive engine speed (overspeed) may result.
The manual shutoff lever is located on the side of the electronic governor. The engine can be shut OFF by rotating and holding the manual shutoff lever in the counterclockwise (CCW) direction.Rotating and holding the manual shutoff lever in the clockwise (CW) direction overrides the shutoff solenoid. The lever is spring loaded and will return to the neutral position when released.After Stopping the Engine
If freezing temperatures are expected, allow the engine jacket water system to cool; then check the coolant for proper antifreeze protection. The engine must be protected against freezing to the lowest expected outside temperature. Add permanent-type antifreeze if required.