Information valve assy, suctio
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1pcs 8981438701 8-98145449-1 6HK1 294200-9972 294200-2970 294200-4970
NYOMSPLOO
NYOMSPLOO
294200-9972 294200-2970 Common Rail Fuel Pump Suction Control SCV Valve 8981438701 8-98145449-1 For ISUZU 6HK1
Generic Package Includes: 1 x Common Rail Fuel Pump | Only the above package content, other products are not included. | Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Generic Package Includes: 1 x Common Rail Fuel Pump | Only the above package content, other products are not included. | Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Suction Control Valve SCV 294200-2970 2942002970 Diesel Fuel injector Pump Regulator
xinDieseltt Symptoms of a failing SCV include inconsistent rail pressure readings, rough engine idle, increased fuel consumption, and potential stalling || Replacement Part Number:294200-2970 2942002970 Check whether the part number is correct to avoid installing incorrect parts. || Our suction control valve comes with six-month warranty || Every SCV valve is rigorously tested and verified. || If you are unsure if it will fit your vehicle or have problems with installation, please contact our customer service staff to assist you.
xinDieseltt Symptoms of a failing SCV include inconsistent rail pressure readings, rough engine idle, increased fuel consumption, and potential stalling || Replacement Part Number:294200-2970 2942002970 Check whether the part number is correct to avoid installing incorrect parts. || Our suction control valve comes with six-month warranty || Every SCV valve is rigorously tested and verified. || If you are unsure if it will fit your vehicle or have problems with installation, please contact our customer service staff to assist you.
You can express buy:
USD 40
13-05-2025
13-05-2025
New Common Rail Fuel Pump Suction Control SCV Valve 8981438701 8-98145449-1 FOR ISUZU 6HK1 294200-9972 294200-2970 294200-4970
USD 44.99
13-05-2025
13-05-2025
SCV 294200-2970 Bascolin Common Rail Suction Control Valve 294200-2970 for ISUZU Forward 6HK1 and FAW 6DL2H-25E4R Bus
USD 58
13-05-2025
13-05-2025
Suction Control Valve SCV 8-98145449-1 294200-2970 294200-4970 294200-9972
Images:
USD 51.8
[03-May-2025]
USD 49.7
[27-May-2025]
USD 97.5
[10-Nov-2022]
USD 68
[11-Nov-2022]
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 29420-02970 | VALVE ASSY, SUCTIO |
Information:
After Storage
Test the main stator windings with a megohmmeter in the following situations: 1. Before initial startup of generator set.2. Every 3 months* if generator is operating in a humid environment.3. If generator has not been run under load for 3 months* or more.*This is a guideline only. It may be necessary to megger more frequently if environment is extremely humid, salty or if the last megger test was close to 1 megohm.The megohmmeter test is described in Service Manuals SENR2180 or SENR7968. A reading of 1 meghom or less indicates that the winding has absorbed too much moisture.To Remove Moisture
To remove moisture caused by high humidity, use one of the following methods to make the generator dry:1. Energize space heaters in generator if so equipped.2. Put the generator in an oven at a temperature of not more than 85°C (185°F) for four hours.
If an oven is used for drying, use a forced air type rather than a radiant type. Radiant ovens can cause localized overheating.
3. Space heaters of the same type used in marine applications, can be installed on generators. (See the Parts Book.) These heaters heat the windings to remove moisture and should be connected at all times in high humidity conditions whenever the generator is not running.4. Use a canvas enclosure around the generator and heating lamps to increase the temperature. Make an opening in the top for release of moisture.5. Send a low voltage current through the windings to increase the temperature of the windings. Do not exceed 85°C (185°F).If the megohmmeter test reads under 1 megohm after the drying or if it goes below 1 megohm shortly after drying, contact your Caterpillar dealer. The insulation has deteriorated and should be reconditioned.
Test the main stator windings with a megohmmeter in the following situations: 1. Before initial startup of generator set.2. Every 3 months* if generator is operating in a humid environment.3. If generator has not been run under load for 3 months* or more.*This is a guideline only. It may be necessary to megger more frequently if environment is extremely humid, salty or if the last megger test was close to 1 megohm.The megohmmeter test is described in Service Manuals SENR2180 or SENR7968. A reading of 1 meghom or less indicates that the winding has absorbed too much moisture.To Remove Moisture
To remove moisture caused by high humidity, use one of the following methods to make the generator dry:1. Energize space heaters in generator if so equipped.2. Put the generator in an oven at a temperature of not more than 85°C (185°F) for four hours.
If an oven is used for drying, use a forced air type rather than a radiant type. Radiant ovens can cause localized overheating.
3. Space heaters of the same type used in marine applications, can be installed on generators. (See the Parts Book.) These heaters heat the windings to remove moisture and should be connected at all times in high humidity conditions whenever the generator is not running.4. Use a canvas enclosure around the generator and heating lamps to increase the temperature. Make an opening in the top for release of moisture.5. Send a low voltage current through the windings to increase the temperature of the windings. Do not exceed 85°C (185°F).If the megohmmeter test reads under 1 megohm after the drying or if it goes below 1 megohm shortly after drying, contact your Caterpillar dealer. The insulation has deteriorated and should be reconditioned.