Information cover, feed pump
Rating:
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 29418-40050 | HU | COVER, FEED PUMP | |
| H-U | ISUZU | COVER, FEED PUMP | |
| HU | NISSAN MOTOR | COVER, FEED PUMP | |
| HU | TOYOTA | COVER, FEED PUMP |
Information:
Machine Engine: 3126B (S/N: 5GG1-UP) 3126B (S/N: BMA1-UP)Industrial Engines: 3126B (S/N: BEJ1-UP)Marine Engines: 3126B (S/N: 3GS1-UP)Introduction
A new steel engine oil lines group is available for the engines that are listed above. The Engine Oil Lines Group is available for repair of the flexible high pressure oil line that is on the Hydraulic Electronic Unit Injector Pump. The engine oil lines group is adaptable to the serial numbers that are listed above. The engine oil lines group is effective with the following serial numbers: 5GG6100-UP, BEJ6915-UP and 3GS2119-UP.
Table 1
Required Tools
Tool Part Number Description
A 180-0186 Removal Tool
Table 2
Components in Engine Oil Lines Group
Callout Part Number Description Quantity
16 247-3755 Tube As 1
17 6V-8636 Connector 1
18 221-3494 O-Ring Seal 2
19 214-7568 O-Ring Seal 2
20 6V-8724 Elbow 1 Removal of the Flexible Oil Line
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01068766
Inlet fuel line (fuel transfer pump to cylinder head) (1) Connector (2) Hose assembly (3) Fuel transfer pump
Remove connector (1) and hose assembly (2) from the fuel transfer pump (3).
A new steel engine oil lines group is available for the engines that are listed above. The Engine Oil Lines Group is available for repair of the flexible high pressure oil line that is on the Hydraulic Electronic Unit Injector Pump. The engine oil lines group is adaptable to the serial numbers that are listed above. The engine oil lines group is effective with the following serial numbers: 5GG6100-UP, BEJ6915-UP and 3GS2119-UP.
Table 1
Required Tools
Tool Part Number Description
A 180-0186 Removal Tool
Table 2
Components in Engine Oil Lines Group
Callout Part Number Description Quantity
16 247-3755 Tube As 1
17 6V-8636 Connector 1
18 221-3494 O-Ring Seal 2
19 214-7568 O-Ring Seal 2
20 6V-8724 Elbow 1 Removal of the Flexible Oil Line
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01068766
Inlet fuel line (fuel transfer pump to cylinder head) (1) Connector (2) Hose assembly (3) Fuel transfer pump
Remove connector (1) and hose assembly (2) from the fuel transfer pump (3).