Information element kit, suppl
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
IMIFAFTAbT 294090-0260 2940900260 Common Rail High Pressure Pump Plunger Fits for Denso HP4 series Fuel injection pump
IMIFAFTAbT Product Name: 294090-0260 2940900260 Common Rail High Pressure Pump Plunger || Part number: 294090-0260 2940900260 || Fits for Denso HP4 series Fuel injection pump || 1 PCS Common Rail High Pressure Pump Plunger || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can leave us a message and provide your engine serial number and nameplate
IMIFAFTAbT Product Name: 294090-0260 2940900260 Common Rail High Pressure Pump Plunger || Part number: 294090-0260 2940900260 || Fits for Denso HP4 series Fuel injection pump || 1 PCS Common Rail High Pressure Pump Plunger || Note: Please confirm that the product shown in the part number is what you need. If you cannot confirm you can leave us a message and provide your engine serial number and nameplate
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 29409-00260 | ELEMENT KIT, SUPPL |
Information:
Industrial Engine: C-9 (S/N: CLJ1-UP)Marine Engine: C9 (S/N: CSN1-UP; C9A1-UP; C9B1-UP)Truck Engine: 3126E (S/N: HEP1-UP) C7 (S/N: KAL1-UP; FML1-UP; FMM1-UP) C9 (S/N: 9DG1-UP; CKP1-UP; MTB1-UP)Agricultural Tractor: MT735 (S/N: AKN1-UP) MT745 (S/N: ALA1-UP) MT755 (S/N: ALM1-UP) MT765 (S/N: AMS1-UP) MTC735 (S/N: 8121-UP) MTC745 (S/N: 8131-UP) MTC755 (S/N: 8141-UP) MTC765 (S/N: 8151-UP)Combine: Lexion 470 R (S/N: 7651-UP) Lexion 475 R (S/N: 7671-UP)Excavator: 330C (S/N: CYA1-UP; HAA1-UP; MCA1-UP; JAB1-UP; D3C1-UP; JCD1-UP; KDD1-UP; MSD1-UP; GAG1-UP; B1K1-UP; JNK1-UP; B2L1-UP; B3M1-UP; MKM1-UP; B4N1-UP; CAP1-UP; GKX1-UP; DKY1-UP; CGZ1-UP)Track Feller Buncher: TK711 (S/N: 1011-UP) TK721 (S/N: 1021-UP) TK722 (S/N: 1031-UP) TK732 (S/N: 1041-UP) TK741 (S/N: 2021-UP) TK751 (S/N: 3011-UP) TK752 (S/N: 3021-UP)Motor Grader: 12H (S/N: CBK1-UP; AMZ1-UP; 1251-UP)Track-Type Loader: 973C (S/N: BCP1-UP)Track-Type Tractor: D6R Series II (S/N: BNC1-UP; AFD1-UP; CAD1-UP; ADE1-UP; BLE1-UP; DAE1-UP; ACJ1-UP; BMJ1-UP; BRJ1-UP; AEM1-UP; AFM1-UP; AGM1-UP; BPM1-UP; AEP1-UP; BLT1-UP; FDT1-UP; AAX1-UP; BMY1-UP)Wheel Tractor-Scraper: 615G (S/N: BPW1-UP) 627G (S/N: CEZ1-UP) 637G (S/N: CEJ1-UP; CEM1-UP)Introduction
This special instruction provides the rework procedure for the replacement of the fuel transfer pump that is located on the HEUI pump. The procedure calls for a temporary service bolt that is used during the removal of the fuel transfer pump in order to prevent the body of HEUI pump from separating. Once the fuel transfer pump has been reinstalled onto the HEUI pump, the service bolt is then removed.
The correct procedures and tooling specifications must always be used. Failure to follow any of the procedures may result in damage, malfunction, or possible engine failure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Table 1
Required Tools
Callout Part Number Description
A 193-9199 T27 Torx bit (1)
B 194-3536 T40 Torx bit (1)
C 6 mm Hex Key Wrench
Flat head screwdriver
Torque Wrench (in lb)
Torque Wrench (ft lb)
1U-6396 O-Ring Assembly Compound
( 1 ) Or EquivalentNote: The 178-2357 Fuel Transfer Pump Gp is required for replacement of the fuel transfer pump. Refer to Table 2 for a list of the components that are needed.
Table 2
Required Components
Callout Part Number Description Qty
5 227-5904 O-Ring Seal 1
9 256-0302 Bolt 1
10 239-2402 Seal 2
11 179-8128 Seal 1
12 185-3241 O-Ring Seal 1
This special instruction provides the rework procedure for the replacement of the fuel transfer pump that is located on the HEUI pump. The procedure calls for a temporary service bolt that is used during the removal of the fuel transfer pump in order to prevent the body of HEUI pump from separating. Once the fuel transfer pump has been reinstalled onto the HEUI pump, the service bolt is then removed.
The correct procedures and tooling specifications must always be used. Failure to follow any of the procedures may result in damage, malfunction, or possible engine failure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Table 1
Required Tools
Callout Part Number Description
A 193-9199 T27 Torx bit (1)
B 194-3536 T40 Torx bit (1)
C 6 mm Hex Key Wrench
Flat head screwdriver
Torque Wrench (in lb)
Torque Wrench (ft lb)
1U-6396 O-Ring Assembly Compound
( 1 ) Or EquivalentNote: The 178-2357 Fuel Transfer Pump Gp is required for replacement of the fuel transfer pump. Refer to Table 2 for a list of the components that are needed.
Table 2
Required Components
Callout Part Number Description Qty
5 227-5904 O-Ring Seal 1
9 256-0302 Bolt 1
10 239-2402 Seal 2
11 179-8128 Seal 1
12 185-3241 O-Ring Seal 1