Information pump assy, supply
PUMP ASSY, SUPPLY
IA
- *1:SHAPE CHANGE OF THE INLET PIPE. IF THE FUEL HOSE
- (CAR PART)IS REPLACED AT THE SAME TIME, THE NEW ONE CAN
- BE USED INSTEAD OF THE OLD ONE.
- #..CHANGE OVER DATE UNSCHEDULED.
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Meckparts 16700-EB30B Fuel Injection Pump 294000-0370 Compatible with Nissan Engine YD25 Compatible with Pathfinder Compatible with Navara
Meckparts Part Numbers: 294000-0370 16700-EB30B || Package Includes: 1 x Fuel Injection Pump || Compatible with Nissan Engine YD25 Compatible with Navara Compatible with Pathfinder || Directly Replace, and, Easy to Install. Exact Same Performance as Original || Aftermarket Products. Premium Quality - Reliable in Operation, Long Working Life. Easy To Install.
Meckparts Part Numbers: 294000-0370 16700-EB30B || Package Includes: 1 x Fuel Injection Pump || Compatible with Nissan Engine YD25 Compatible with Navara Compatible with Pathfinder || Directly Replace, and, Easy to Install. Exact Same Performance as Original || Aftermarket Products. Premium Quality - Reliable in Operation, Long Working Life. Easy To Install.
Fuel Injection Pump 294000-0370 for Nissan Navara Pathfinder Engine YD25
ADPelcote Part number:294000-0370 || Applications:for Nissan Navara Pathfinder Engine YD25
ADPelcote Part number:294000-0370 || Applications:for Nissan Navara Pathfinder Engine YD25
You can express buy:
USD 48.9
13-11-2022
13-11-2022
ORLTL 294000-0370 Diesel Auto Suction Control Valve 294000 0370 Metering Solenoid Valve 2940000370 For Common Rail Injector
USD 51.9
10-11-2022
10-11-2022
USD 51.9
10-11-2022
10-11-2022
Images:
USD 48.99
[10-Nov-2022]
USD 48.99
[10-Nov-2022]
USD 48.99
[10-Nov-2022]
USD 51.9
[10-Nov-2022]
Components :
| 001. | PUMP ASSY, SUPPLY | 29400-00370 |
| 001. | PUMP ASSY, SUPPLY | 29400-00370 |
| 001. | PUMP ASSY, SUPPLY | 29400-00370 |
| 001. | PUMP ASSY, SUPPLY | 29400-00370 |
| 002. | OVERHAUL KIT, SUPP | 29400-90110 |
| 002. | OVERHAUL KIT, SUPP | 29400-90110 |
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 29400-00370 | 16700EB300 | PUMP ASSY, SUPPLY | |
| 16700EB30D | NISSAN MOTOR | PUMP ASSY, SUPPLY | |
| 16700EB30C | NISSAN MOTOR | PUMP ASSY, SUPPLY | |
| 16700EB30B | NISSAN MOTOR | PUMP ASSY, SUPPLY | |
| 16700EB300 | NISSAN MOTOR | PUMP ASSY SUPPLY |
Information:
1. Remove shaft (2). Remove pin (1) from the shaft.2. Remove pins (3) from the flyweights. Remove flyweights (4). 3. Remove ring, races (6) and the bearing from riser (follower) (5). 4. Remove cover (7) and spring (8) from the governor housing. There is force on the cover from the spring.5. Remove seal (9) from the cover. 6. Remove cover (10) for the low and high idle adjustments.7. Remove locknut and screw (13) for the high idle adjustment.8. Remove bolt (15) and the washers for the low idle adjustment.9. Remove spring (16) and the guide.10. Remove pin (14) and plate (11).11. Remove shaft (12) from the housing. 12. Remove two spacers (17) and pin (18) from the shaft. 13. Remove shaft (19) from the governor housing.14. Remove washer (20) and levers (21) and (22) from the governor housing. 15. Remove seal (23) and the bearing.16. Remove seals (24) and (25) from the governor housing.Assemble Governor
1. Install the bearing and seal in the housing with tool (A). The lip of the seal must be toward the bearing. 2. Install seal (1) in housing with tool (A). The lip of the seal must be toward inside of housing.3. Install seal (2) in the housing with tool (B). The lip of the seal must be toward the inside of the housing. 4. Install shaft (3) in the housing. 5. Install plates (4), spacers (8) and pin (7) on shaft (5).6. Install shaft (5) in the housing and through washer (9) and levers (6). 7. Install pin (11) in the holes of the plates.8. Install screw (10) and the locknut for the high idle adjustment.9. Install spring (13) and the guide.10. Install bolt (12) and the washer for the low idle adjustment.11. Push plate and pin (11) over toward bolt (12) and tighten the bolt. 12. Install the seal in cover (14) with tooling (B). The lip of the seal must be toward the inside. 13. Install spring (15) in the cover. Install cover (14) on the housing.
Spring (15) must be installed with the end of the spring in the position shown.
14. Install the cover (16) for the idle adjustment screws. 15. Install bearing (19) between races (18) on riser (follower) (17). Install ring (20). Ring (20) holds the washers on the riser (follower).16. Install the pin in shaft (23). 17. Install flyweights (22) and pin (21).18. Install shaft (23) in the flyweight assembly.end by: a) connection of governor to fuel injection pump housingb) Make adjustment of fuel system setting (See Fuel System Setting in Testing and Adjusting.)
1. Install the bearing and seal in the housing with tool (A). The lip of the seal must be toward the bearing. 2. Install seal (1) in housing with tool (A). The lip of the seal must be toward inside of housing.3. Install seal (2) in the housing with tool (B). The lip of the seal must be toward the inside of the housing. 4. Install shaft (3) in the housing. 5. Install plates (4), spacers (8) and pin (7) on shaft (5).6. Install shaft (5) in the housing and through washer (9) and levers (6). 7. Install pin (11) in the holes of the plates.8. Install screw (10) and the locknut for the high idle adjustment.9. Install spring (13) and the guide.10. Install bolt (12) and the washer for the low idle adjustment.11. Push plate and pin (11) over toward bolt (12) and tighten the bolt. 12. Install the seal in cover (14) with tooling (B). The lip of the seal must be toward the inside. 13. Install spring (15) in the cover. Install cover (14) on the housing.
Spring (15) must be installed with the end of the spring in the position shown.
14. Install the cover (16) for the idle adjustment screws. 15. Install bearing (19) between races (18) on riser (follower) (17). Install ring (20). Ring (20) holds the washers on the riser (follower).16. Install the pin in shaft (23). 17. Install flyweights (22) and pin (21).18. Install shaft (23) in the flyweight assembly.end by: a) connection of governor to fuel injection pump housingb) Make adjustment of fuel system setting (See Fuel System Setting in Testing and Adjusting.)