Information pump assy, injecti
Nozzle:
0935006520

Rating:
KIT List:
Pump assy, injecti | 0960100541 |
Components :
001. | PUMP ASSY, INJECTI | 19600-01380 |
001. | PUMP ASSY, INJECTI | 19600-01380 |
002. | RING SUB-ASSY, ROL | 09618-00050 |
003. | COVER SUB-ASSY, TI | 09621-01060 |
004. | GOVERNOR ASSY, TOR | 09627-01460 |
005. | SHIM, PLUNGER ADJU | 09640-60020 |
006. | COVER SUB-ASSY, GO | 09644-01670 |
Scheme ###:
000. | [01] | 19600-01383 | PUMP ASSY, INJECTI | |
001. | [01] | 09611-00472 | HOUSING SUB-ASSY, | |
002. | [01] | 09640-01710 | HEAD SUB-ASSY, DIS | |
003. | [01] | 09644-01670 | COVER SUB-ASSY, GO | |
004. | [01] | 09612-10150 | SHAFT, DRIVE | |
005. | [01] | 09618-00050 | RING SUB-ASSY, ROL | |
006. | [01] | 09614-00030 | PUMP SUB-ASSY, FUE | |
007. | [01] | 09627-01460 | GOVERNOR ASSY, TOR | |
008. | [01] | 09646-01770 | SHAFT SUB-ASSY, SP | |
008. | [01] | 09646-01920 | SHAFT SUB-ASSY, SP | |
009. | [01] | 09603-00520 | SOLENOID ASSY, FUE | |
009. | [01] | 09603-00160 | SOLENOID ASSY, FUE | |
009-001. | [01] | 09604-90350 | O-RING | |
010. | [01] | 09626-00050 | HOLDER SUB-ASSY, F | |
011. | [04] | 09626-30030 | FLYWEIGHT, DISTRIB | |
012. | [1C] | 09625-21260 | SLEEVE, GOVERNOR | |
012. | [1C] | 09625-21250 | SLEEVE, GOVERNOR | |
012. | [1C] | 09625-20790 | SLEEVE, GOVERNOR | |
012. | [1C] | 09625-20680 | SLEEVE, GOVERNOR | |
013. | [01] | 09626-50030 | WASHER, FLYWEIGHT | |
015. | [01] | 09626-50020 | WASHER, FLYWEIGHT | |
016. | [01] | 09625-40050 | NUT, GOVERNOR SHAF | |
017. | [01] | 09625-00030 | SHAFT SUB-ASSY, GO | |
018. | [01] | 94914-02930 | O-RING | |
019. | [04] | 09644-90110 | BOLT, SOCKET | |
020. | [01] | 09625-50020 | RING, GOVERNOR SLE | |
021. | [04] | 09643-00180 | VALVE SUB-ASSY, SN | |
022. | [04] | 09642-00510 | VALVE SUB-ASSY, DI | |
023. | [04] | 09642-70010 | SPRING, DELIVERY V | |
024. | [04] | 09642-60070 | GASKET, DELIVERY V | |
026. | [01] | 09623-00250 | CAMPLATE SUB-ASSY, | |
028. | [01] | 09624-50020 | PLATE, PLUNGER, LW | |
029. | [01] | 09624-40040 | PLATE, PLUNGER, UP | |
030. | [01] | 09622-40040 | SPRING, COUPLING | |
031. | [01] | 09622-20020 | COUPLING | |
032. | [01] | 09612-40030 | GEAR, GOVERNOR DRI | |
033. | [02] | 09612-60020 | JOINT, RUBBER | |
034. | [01] | 09612-50010 | WASHER, DRIVE SHAF | |
035. | [01] | 09614-70052 | COVER, FEED PUMP | |
036. | [01] | 94913-00260 | KEY, WOODRUFF | |
037. | [01] | 94913-00300 | KEY, WOODRUFF | |
040. | [01] | 09603-90040 | SEAL, 0IL | |
041. | [01] | 09620-11030 | PISTON, TIMER | |
041. | [01] | 09620-11440 | PISTON, TIMER | |
042. | [01] | 09621-30020 | SUB-PISTON, TIMER | |
043. | [01] | 09620-50020 | PIN, TIMER SLIDE | |
044. | [01] | 09621-60120 | STOPPER, TIMER SLI | |
045. | [01] | 09621-10080 | CLIP, TIMER | |
046. | [01] | 09621-80210 | COVER, TIMER | |
047. | [01] | 09621-80270 | COVER, TIMER | |
048. | [1C] | 09620-82150 | SPRING, TIMER, OUT | |
048. | [1C] | 09620-82140 | SPRING, TIMER, OUT | |
048. | [1C] | 09620-82130 | SPRING, TIMER, OUT | |
048. | [1C] | 09620-81870 | SPRING, TIMER, OUT | |
049. | [01] | 09644-90260 | BOLT, SOCKET | |
050. | [03] | 09604-90400 | O-RING | |
051. | [01] | 09641-70040 | PLUG, DISTRIBUTIVE | |
052. | [01] | 09641-80020 | BOLT, DISTRIBUTIVE | |
053. | [03] | 09642-60030 | GASKET, DELIVERY V | |
053. | [01] | 09642-60030 | GASKET, DELIVERY V | |
054. | [01] | 94914-02970 | O-RING | |
054. | [01] | 09604-90510 | O-RING | |
055. | [01] | 09624-70010 | SHEET, PLUNGER SPR | |
056. | [02] | 09623-70010 | GUIDE SUB-ASSY, PL | |
057. | [02] | 09623-60040 | SPRING, PLUNGER | |
058. | [02] | 09624-60010 | SHEET, PLUNGER SPR | |
060. | [01] | 94914-02980 | O-RING | |
062. | [02] | 09627-90010 | SPRING, LEVER SUPP | |
063. | [01] | 09648-00010 | SMOKE SET SUB-ASSY | |
063-001. | [01] | 94914-02900 | O-RING | |
063-001. | [01] | 09604-90470 | O-RING | |
064. | [01] | 90166-06051 | NUT, HEXAGON | |
067. | [04] | 09644-90020 | BOLT, SOCKET | |
068. | [01] | 09644-50140 | GUIDE, RETURN SPRI | |
070. | [01] | 09602-00030 | SCREW SUB-ASSY, OV | |
071. | [05] | 09024-10010 | WASHER, AIR BLEEDE | |
073. | [02] | 94900-20420 | SCREW, COUNTERSUNK | |
075. | [01] | 09604-90300 | O-RING | |
078. | [01] | 09644-41450 | SPRING, RETURN | |
079. | [01] | 09644-41290 | SPRING, RETURN | |
080. | [1C] | 09643-55510 | LEVER SUB-ASSY, AD | |
080. | [1C] | 09643-56440 | LEVER SUB-ASSY, AD | |
080. | [1C] | 09643-55530 | LEVER SUB-ASSY, AD | |
080. | [1C] | 09643-56430 | LEVER SUB-ASSY, AD | |
080. | [1C] | 09643-55520 | LEVER SUB-ASSY, AD | |
080. | [1C] | 09643-56420 | LEVER SUB-ASSY, AD | |
081. | [01] | 09644-60100 | GASKET, GOVERNOR C | |
082. | [01] | 09616-00280 | VALVE SUB-ASSY, RE | |
082-001. | [01] | 09604-90180 | O-RING | |
082-002. | [01] | 09604-90500 | O-RING | |
082-002. | [01] | 94914-02920 | O-RING | |
084. | [01] | 09634-20010 | NUT, LOCK | |
085. | [01] | 94918-00770 | SCREW, HOLLOW | |
086. | [02] | 09626-90020 | BOLT, GOVERNOR LIN | |
087. | [01] | 94905-50300 | NUT, CAP | |
088. | [04] | 09644-90070 | BOLT, SOCKET | |
091. | [01] | 09627-30140 | WASHER, GOVERNOR T | |
092. | [2C] | 09624-80220 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80110 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80100 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80090 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80080 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80070 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80060 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80050 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80040 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80030 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80020 | SHIM, PLUNGER SPRI | |
092. | [2C] | 09624-80010 | SHIM, PLUNGER SPRI | |
093. | [1C] | 09626-60280 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60290 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60300 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60310 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60320 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60330 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60340 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60270 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60180 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60170 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60100 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60110 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60120 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60130 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60140 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60150 | WASHER, GOVERNOR G | |
093. | [1C] | 09626-60160 | WASHER, GOVERNOR G | |
094. | [1C] | 09625-60600 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60590 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60580 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60570 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60560 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60550 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60540 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60530 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60520 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60510 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60500 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60490 | PLUG, GOVERNOR SLE | |
094. | [1C] | 09625-60480 | PLUG, GOVERNOR SLE | |
095. | [2C] | 09621-40110 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40120 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40130 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40140 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40150 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40200 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40100 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40090 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40030 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40040 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40050 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40060 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40070 | WASHER, TIMER SENS | |
095. | [2C] | 09621-40080 | WASHER, TIMER SENS | |
096. | [01] | 09644-80111 | COLLAR, SMOKE SET | |
097. | [1C] | 09640-60520 | SHIM, PLUNGER ADJU | |
097. | [1C] | 09640-60420 | SHIM, PLUNGER ADJU | |
097. | [1C] | 09640-60270 | SHIM, PLUNGER ADJU | |
097. | [1C] | 09640-60170 | SHIM, PLUNGER ADJU | |
097. | [1C] | 09640-60020 | SHIM, PLUNGER ADJU | |
104. | [01] | 94904-50180 | BOLT, HEXAGON, W/ | |
105. | [01] | 94904-50190 | BOLT, HEXAGON, W/ | |
108. | [01] | 09604-51040 | WIRE SUB-ASSY | |
109. | [01] | 09621-01060 | COVER SUB-ASSY, TI | |
110. | [01] | 09643-83370 | BRACKET, IDLE UP | |
111. | [07] | 09644-90130 | BOLT, SOCKET | |
112. | [01] | 09643-82870 | BRACKET, IDLE UP | |
114. | [05] | 09644-90100 | BOLT, SOCKET | |
116. | [01] | 09643-83350 | BRACKET, IDLE UP | |
121. | [01] | 09647-10942 | BRACKET SUB-ASSY, | |
122. | [01] | 09653-00071 | FILTER, SUB-ASSY | |
123. | [01] | 09221-80220 | NIPPLE SUB-ASSY, S | |
124. | [01] | 09221-80510 | NIPPLE SUB-ASSY, S | |
126. | [01] | 09606-40110 | WASHER | |
135. | [02] | 09644-90151 | BOLT, SOCKET | |
140. | [01] | 09647-00520 | IDLE UP SUB-ASSY | |
147. | [01] | 90577-02000 | E-RING | |
148. | [01] | 94910-02860 | BEARING, BALL | |
151. | [01] | 94905-61680 | NUT | |
152. | [01] | 09602-90630 | CLIP, CONNECTOR SU | |
200. | [02] | 09642-60130 | GASKET, DELIVERY V |
Cross reference number
Part num | Firm num | Firm | Name |
19600-01380 | PUMP ASSY, INJECTI | ||
R2L3 13 800C | MAZDA | PUMP ASSY, INJECTI |
Information:
start by:a) remove oil pump1. Check the identification on the connecting rods and caps as to their location in the engine. The caps must be installed in original positions in the engine.2. Turn the crankshaft until two of the pistons are at bottom center. 3. Remove connecting rod caps (1) from the connecting rods. Remove the lower half of the bearings from the caps.
Be careful not to damage the crankshaft journals. Do not turn the crankshaft while any of the connecting rod caps are removed.
4. Push the connecting rod away from the crankshaft and remove the upper half of the bearings from the connecting rods.5. Make sure the surface of the connecting rod where the bearings make contact is clean and free of dirt.
Make sure the tabs on the bearings are in alignment with the notches in the connecting rods and caps.
6. Install the upper half of new bearings in the connecting rods.7. Pull the connecting rod down slowly on the crankshaft.
Make sure the surfaces where the bearings make contact in the caps are clean and free of dirt.
8. Install new bearings (2) in the caps. Make sure the tabs on the bearings are in alignment with the notches in the caps.9. Put clean engine oil on the threads of the bolts in the connecting rods.10. Check the bearing clearance with Plastigage (A) as follows: a) Make sure the numbers on the caps and connecting rods are the same and are on the same respective side. If new connecting rods are installed, put the cylinder number on the rods and caps.b) Put the caps and plastigage (A) in the correct position on the connecting rods. Install the nuts that hold them.c) Tighten the two nuts evenly to a torque of 60 6 lb.ft. (81.3 8.1 N m). Put a mark on each nut and tighten the nuts 120° more from the marks. d) Remove the caps from the connecting rods and Plastigage (A). Measure the thickness of the Plastigage. The connecting rod bearing clearance must be .0028 to .0066 in. (0.071 to 0.168 mm) for new bearings.e) Put clean engine oil in the bearing caps and install them again. Follow the tightening procedure in Step 10.f) Do Steps 1 through 10 for the other connecting rod bearings.end by:a) install oil pump
Be careful not to damage the crankshaft journals. Do not turn the crankshaft while any of the connecting rod caps are removed.
4. Push the connecting rod away from the crankshaft and remove the upper half of the bearings from the connecting rods.5. Make sure the surface of the connecting rod where the bearings make contact is clean and free of dirt.
Make sure the tabs on the bearings are in alignment with the notches in the connecting rods and caps.
6. Install the upper half of new bearings in the connecting rods.7. Pull the connecting rod down slowly on the crankshaft.
Make sure the surfaces where the bearings make contact in the caps are clean and free of dirt.
8. Install new bearings (2) in the caps. Make sure the tabs on the bearings are in alignment with the notches in the caps.9. Put clean engine oil on the threads of the bolts in the connecting rods.10. Check the bearing clearance with Plastigage (A) as follows: a) Make sure the numbers on the caps and connecting rods are the same and are on the same respective side. If new connecting rods are installed, put the cylinder number on the rods and caps.b) Put the caps and plastigage (A) in the correct position on the connecting rods. Install the nuts that hold them.c) Tighten the two nuts evenly to a torque of 60 6 lb.ft. (81.3 8.1 N m). Put a mark on each nut and tighten the nuts 120° more from the marks. d) Remove the caps from the connecting rods and Plastigage (A). Measure the thickness of the Plastigage. The connecting rod bearing clearance must be .0028 to .0066 in. (0.071 to 0.168 mm) for new bearings.e) Put clean engine oil in the bearing caps and install them again. Follow the tightening procedure in Step 10.f) Do Steps 1 through 10 for the other connecting rod bearings.end by:a) install oil pump