Information compensator sub-as
Rating:
Scheme ###:
| 000. | [01] | 19260-00420 | COMPENSATOR SUB-AS | |
| 001. | [01] | 19261-10030 | HOUSING, BOOST COM | |
| 002. | [01] | 19262-00050 | COVER SUB-ASSY | |
| 003. | [01] | 19263-30010 | WASHER, THRUST | 19263-30010 |
| 004. | [01] | 19263-20010 | SEAT, SPRING, UPR | 19263-20010 |
| 005. | [01] | 19262-70020 | ROD, PUSH | 19262-70020 |
| 006. | [01] | 19263-50010 | BUSHING, GUIDE | 19263-50010 |
| 008. | [01] | 19262-80010 | SCREW | |
| 009. | [01] | 19263-40030 | SPRING, BOOST COMP | 19263-40030 |
| 010. | [01] | 19263-10010 | DIAPHRAGM | 19263-10010 |
| 011. | [02] | 90160-06051 | NUT, HEXAGON | 90160-06051 |
| 012. | [01] | 94901-70490 | WASHER, WAVE | 94901-70490 |
| 013. | [02] | 94901-81020 | WASHER, COPPER PLA | 94901-81020 |
| 014. | [01] | 09103-10020 | NUT, CAP | 09103-10020 |
| 015. | [01] | 09116-60080 | SCREW, STOP | 09116-60080 |
| 015. | [01] | 09116-60110 | SCREW, STOP | |
| 016. | [01] | 94805-30130 | NUT, HEXAGON, W/HO | 94805-30130 |
| 019. | [01] | 09052-40041 | PLUG, SCREW | 09052-40041 |
| 020. | [01] | 94901-81040 | WASHER, COPPER PLA | 94901-81040 |
| 021. | [03] | 90107-06121 | BOLT, HEXAGON | 90107-06121 |
| 022. | [01] | 94904-50120 | BOLT, HEXAGON, W/ | 94904-50120 |
Include in #3:
19080-02892
as COMPENSATOR SUB-AS
19260-00420
Cross reference number
| Part num | Firm num | Firm | Name |
| 19260-00420 | COMPENSATOR SUB-AS |
Information:
Introduction
This Special Instruction contains the strap torquing procedure for the straps on the DEF tank.Read the entire Special Instruction. Understand the information before you perform any procedures. Strap Torquing Procedure
Illustration 1 g03354750
(1) Strap (2) Nut
Install strap (1) and torque nut (2) .Torque for nut (2) ... 11 1 N m (97 9 lb in)Note: If the strap has a hook or other non-adjustable fastener on one end, only the adjustment end is torqued during installation.Note: If both ends of the strap have adjustable fasteners, both ends should be torqued only once. Do not go back and forth when applying assembly torque. Torque the first side to specification, then ensure that the torque on the second side is at specifications. Do not go back and retorque the first side.
This Special Instruction contains the strap torquing procedure for the straps on the DEF tank.Read the entire Special Instruction. Understand the information before you perform any procedures. Strap Torquing Procedure
Illustration 1 g03354750
(1) Strap (2) Nut
Install strap (1) and torque nut (2) .Torque for nut (2) ... 11 1 N m (97 9 lb in)Note: If the strap has a hook or other non-adjustable fastener on one end, only the adjustment end is torqued during installation.Note: If both ends of the strap have adjustable fasteners, both ends should be torqued only once. Do not go back and forth when applying assembly torque. Torque the first side to specification, then ensure that the torque on the second side is at specifications. Do not go back and retorque the first side.