Information pump assy, injecti
Rating:
Components :
| 001. | PUMP ASSY, INJECTI | 19100-01021 |
| 002. | SWITCH KIT, CONTRO | 09009-90280 |
| 003. | BODY ASSY, INJECTI | 09010-06410 |
| 004. | GOVERNOR ASSY, MEC | 09130-01030 |
| 004. | GOVERNOR ASSY, MEC | 09130-01030 |
| 005. | TIMER ASSY, AUTOMA | 09180-01781 |
| 005. | TIMER ASSY, AUTOMA | 09180-01781 |
| 006. | PUMP ASSY, FUEL FE | 09210-01900 |
| 007. | COUPLING ASSY | 09250-00420 |
| 008. | COUPLING ASSY | 09250-00631 |
Scheme ###:
| 000. | [01] | 19100-01021 | PUMP ASSY, INJECTI | 22010-4261 |
| 001. | [01] | 09010-06410 | BODY ASSY, INJECTI | 22110-2110A |
| 002. | [01] | 09130-01030 | GOVERNOR ASSY, MEC | 22310-2921A |
| 002. | [01] | 09130-01031 | GOVERNOR ASSY, MEC | 22310-2921A |
| 003. | [01] | 09180-01781 | TIMER ASSY, AUTOMA | 22510-1620A |
| 004. | [01] | 09210-01900 | PUMP ASSY, FUEL FE | 22570-1330A |
| 005. | [01] | 09250-00631 | COUPLING ASSY | 22610-1470A |
| 005. | [01] | 09250-00420 | COUPLING ASSY | 22610-1320A |
| 006. | [01] | 09009-90280 | SWITCH KIT, CONTRO | 22690-1170A |
| 011. | [01] | 94901-80710 | WASHER, COPPER PLA | 22863-1300A |
| 012. | [01] | 09001-80152 | COVER, CONTROL RAC | 22372-1100A |
| 013. | [01] | 09001-20230 | NUT, TIMER ROUND | 22825-1110A |
| 014. | [01] | 94901-40070 | WASHER, COUNTERSUN | 22877-1580A |
| 015. | [01] | 90458-05750 | KEY, WOODRUFF | 22891-1070A |
| 016. | [01] | 90801-40280 | O-RING | 22817-1050A |
| 017. | [01] | 09003-20040 | CAP | 22342-1110A |
| 018. | [02] | 94901-80350 | WASHER, COPPER PLA | 22847-1950A |
| 020. | [01] | 94805-30100 | NUT, HEXAGON, W/HO | 22885-3830A |
| 021. | [01] | 09002-60050 | SCREW, ADJUSTING | 22396-1140A |
| 024. | [02] | 09001-60060 | SEAL, LEAD | 22323-1200A |
| 025. | [01] | 09039-10050 | CLIP, CORD | 22323-1250A |
| 026. | [01] | 09039-10060 | CLIP, CORD | 22323-1240A |
| 027. | [01] | 09031-00260 | VALVE ASSY, OVERFL | 22107-1380A |
| 028. | [03] | 94901-02490 | WASHER | 22877-1100A |
Include in #3:
19100-01021
as PUMP ASSY, INJECTI
Cross reference number
| Part num | Firm num | Firm | Name |
| 19100-01021 | 22010-4261 | PUMP ASSY, INJECTI |
Information:
Personal injury or death can result from machine articulation or movement. Machine frames can move and a person can be crushed. Connect the steering frame lock between the front and rear frames before working on the machine.Before operating the machine, place the steering frame lock in the stored position.Failure to place the steering frame lock into the stored position before operating can result in loss of steering.
Reference: Disassembly and Assembly, M0084637, "R1700 Load Haul Dump Machine Systems"Reference: Disassembly and Assembly, M0100022, "R2900 Load Haul Dump Machine Systems"Required Parts
Table 1
Required Parts
Qty Part Number Description
1 389-9442 Insulation
1 434-1304 Insulation
1 434-1305 Insulation
7 290-1993 Cable Strap Machine Preparation
Note: Cleanliness is an important factor. Before the removal procedure, clean the exterior of the component thoroughly. Cleaning the exterior will help to prevent dirt from entering the internal mechanism.
Move the machine to a hard level surface away from operating machines and away from personnel.
Engage the parking brake. Place wheel blocks in front of the wheels and behind the wheels.
Stop the engine.
Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Install".
Turn the key start switch and the battery disconnect switch to the OFF position. If there is no battery disconnect switch, remove the negative battery cable at the battery.
Release system pressure. Refer to Operation and Maintenance Manual, "System Pressure - Release".Procedure
Illustration 1 g06525155
Typical example
(1) Cover As
(2) Cover As
Remove cover assembly (1) and cover assembly (2).
Illustration 2 g06525163
Typical example
(3) Hose As
Locate DEF supply hose assembly (3).
Illustration 3 g06526653
DEF supply hose on the R1700 machine
(4) 290-1993 Cable Strap
(5) 389-9442 Insulation
(6) 434-1305 Insulation
(7) 434-1304 Insulation
Illustration 4 g06526655
DEF supply hose on the R2900 machine
(4) 290-1993 Cable Strap
(5) 389-9442 Insulation
(6) 434-1305 Insulation
(7) 434-1304 Insulation
Install Item (5) through Item (7), securing with 290-1993 Cable Straps as required.Note: On the R1700 machine, 434-1305 Insulation (6) is installed over the top of 389-9442 Insulation (5).Note: On the R2900 machine, 434-1305 Insulation (6) slightly overlaps 389-9442 Insulation (5).
Install cover assembly (1) and cover assembly (2). Refer to Illustration 1.