Information pump assy, injecti
Nozzle:
0935002890
Rating:
KIT List:
| Body assy, injecti | 1904400320 |
| Governor assy, mec | 1908900271 |
| Pump assy, fuel fe | 1922900060 |
Components :
| 001. | PUMP ASSY, INJECTI | 19100-00090 |
| 002. | BODY ASSY, INJECTI | 09010-05690 |
| 003. | GOVERNOR ASSY, MEC | 09130-00780 |
| 004. | COVER ASSY, GOVERN | 09145-00232 |
| 005. | PUMP ASSY, FUEL FE | 09210-01700 |
Scheme ###:
| 000. | [01] | 19100-00090 | PUMP ASSY, INJECTI | 22100-58250 |
| 001. | [01] | 09010-05690 | BODY ASSY, INJECTI | 22120-58230 |
| 002. | [01] | 09130-00780 | GOVERNOR ASSY, MEC | 22410-58230 |
| 003. | [01] | 09210-01700 | PUMP ASSY, FUEL FE | |
| 008. | [01] | 09001-80090 | COVER, CONTROL RAC | 22116-56230 |
| 009. | [01] | 09257-50170 | SHAFT, SPLINE | 22174-58201 |
| 010. | [01] | 09001-20190 | NUT, TIMER ROUND | 22611-58200 |
| 011. | [01] | 94901-50590 | WASHER, SPRING | 90099-01449 |
| 012. | [01] | 94913-00210 | KEY, WOODRUFF | 90099-13023 |
| 013. | [01] | 09048-10030 | CLAMP, HOSE | 90929-01132 |
| 016. | [01] | 91418-06201 | BOLT, W/WASHER | 90091-20608 |
| 017. | [04] | 94904-72690 | BOLT, W/WASHER | 90099-04319 |
| 018. | [01] | 94904-74850 | BOLT, W/WASHER | 90099-04415 |
| 019. | [01] | 94904-73910 | BOLT, W/WASHER | 90099-04346 |
Include in #3:
19100-00090
as PUMP ASSY, INJECTI
Cross reference number
| Part num | Firm num | Firm | Name |
| 19100-00090 | 22100-5825 | PUMP ASSY, INJECTI | |
| 22100-58250 | TOYOTA | PUMP ASSY, INJECTI |
Information:
Required Parts
Table 1
Required Parts
Part Number Part Name Quantity
227-1200 Injector Sleeve 6
310-7255 O-Ring Seal 6
310-7257 O-Ring Seal 6 Required Tools
Table 2
Required Tools
Part Number Part Name Quantity
221-9777 Sleeve Installer 1
4C-5552 Large Bore Brush 1
4C-9507 Retaining Compound 1 Cleaning the Injector Sleeves and Installing O-Ring Seal
Note: Thoroughly clean the injector sleeves with the 4C-5552 Large Bore Brush .Note: Thoroughly clean the bore in the cylinder head for the injector sleeves with the 4C-5552 Large Bore Brush .Note: Do not apply any lubricant to the O-ring seals.
Illustration 1 g01379557
(1) 310-7255 O-Ring Seal (2) 310-7257 O-Ring Seal (3) 227-1200 Injector Sleeve
Install the upper O-Ring (1) on the injector sleeve (3) .Note: The upper O-Ring is dark blue.
Install the lower O-Ring (2) on the injector sleeve (3) .Note: The lower O-Ring (2) is turquoise.
Position the injector sleeve on the 221-9777 Sleeve Installer .
Apply a thin coat of 4C-9507 Retaining Compound around the outer circumference of area (A). Ensure that the retaining compound does not make contact with the O-Ring seal at any time.
Position the injector sleeve (3) in the cylinder head by using the 221-9777 Sleeve Installer .
Slowly push the injector sleeve into the cylinder head by gently tapping with a hammer.Note: Allow the 4C-9507 Retaining Compound to cure for two hours at 21 °C (70 °F) before filling the engine with coolant. Longer curing time is required for lower temperatures.
Install the unit injectors. Refer to Disassembly and Assembly, "Unit Injector-Install" to install the unit injectors.
Table 1
Required Parts
Part Number Part Name Quantity
227-1200 Injector Sleeve 6
310-7255 O-Ring Seal 6
310-7257 O-Ring Seal 6 Required Tools
Table 2
Required Tools
Part Number Part Name Quantity
221-9777 Sleeve Installer 1
4C-5552 Large Bore Brush 1
4C-9507 Retaining Compound 1 Cleaning the Injector Sleeves and Installing O-Ring Seal
Note: Thoroughly clean the injector sleeves with the 4C-5552 Large Bore Brush .Note: Thoroughly clean the bore in the cylinder head for the injector sleeves with the 4C-5552 Large Bore Brush .Note: Do not apply any lubricant to the O-ring seals.
Illustration 1 g01379557
(1) 310-7255 O-Ring Seal (2) 310-7257 O-Ring Seal (3) 227-1200 Injector Sleeve
Install the upper O-Ring (1) on the injector sleeve (3) .Note: The upper O-Ring is dark blue.
Install the lower O-Ring (2) on the injector sleeve (3) .Note: The lower O-Ring (2) is turquoise.
Position the injector sleeve on the 221-9777 Sleeve Installer .
Apply a thin coat of 4C-9507 Retaining Compound around the outer circumference of area (A). Ensure that the retaining compound does not make contact with the O-Ring seal at any time.
Position the injector sleeve (3) in the cylinder head by using the 221-9777 Sleeve Installer .
Slowly push the injector sleeve into the cylinder head by gently tapping with a hammer.Note: Allow the 4C-9507 Retaining Compound to cure for two hours at 21 °C (70 °F) before filling the engine with coolant. Longer curing time is required for lower temperatures.
Install the unit injectors. Refer to Disassembly and Assembly, "Unit Injector-Install" to install the unit injectors.