19080-05031 GOVERNOR ASSY, MEC Denso Cross


 

Information governor assy, mec

19080-05031 GOVERNOR ASSY, MEC
Rating:
26
Buy GOVERNOR ASSY, MEC 19080-05031 genuine, new aftermarket engine parts with delivery

Scheme ###:

000. [01] 19080-05031 GOVERNOR ASSY, MEC
001. [01] 09081-00470 HOUSING SUB-ASSY,
002. [01] 09087-80030 PLATE 22132-73600-71
003. [01] 09102-40031 SCREW, ADJUSTING
004. [01] 09101-11670 COVER, GOVERNOR
005. [01] 09101-40090 PIN, STOP
007. [01] 09102-40150 SCREW, ADJUSTING
009. [01] 09103-10151 NUT, CAP 22223-73600-71
010. [01] 09100-60150 SCREW, STROKE ADJU 22136-73600-71
011. [01] 09094-40310 BUSHING 22224-73600-71
012. [01] 09090-10150 LEVER, TENSION 22138-73600-71
015. [01] 09093-00790 LEVER ASSY, CONTRO
016. [01] 09098-90010 SHAFT, LEVER SUPPO 22142-73600-71
017. [02] 09099-10010 PLUG, SCREW
019. [01] 90400-02101 PIN, SPLIT 22144-73600-71
021. [02] 94805-30051 NUT, HEXAGON, W/HO 22441-31625-71
024. [01] 09056-00150 CAPSULE, FULL STOP
025. [01] 09092-30060 NUT, ADAPTER LOCK
026. [01] 09097-00170 SHACKLE ASSY 22154-73600-71
029. [01] 94910-00010 BEARING, BALL
030. [01] 94913-00050 KEY, WOODRUFF
031. [01] 09084-00550 FLYWEIGHT ASSY
032. [01] 94901-50500 WASHER, SPRING
033. [01] 09084-40010 NUT, ROUND
034. [01] 09086-10010 SLEEVE, GOVERNOR
035. [4C] 94901-34100 WASHER, PLATE, SK
035. [4C] 94901-34090 WASHER, PLATE, SK
035. [4C] 94901-34080 WASHER, PLATE, SK
035. [4C] 94901-34070 WASHER, PLATE, SK
035. [4C] 94901-34060 WASHER, PLATE, SK
037. [01] 09088-00110 LEVER ASSY, SWIEVE 22171-73600-71
038. [02] 09089-20080 BUSHING, LEVER 22468-78202-71
039. [02] 94914-03400 O-RING
040. [02] 94907-10090 WASHER, SNAP
041. [01] 09099-20410 SPRING, SPEED CONT
042. [01] 09099-30250 SPRING, START
043. [01] 09091-00531 ADAPTER ASSY
043-001. [01] 09091-10010 SCREW, ADPTER
043-002. [01] 09091-80950 SPRING, MECHANICAL
043-003. [01] 09091-90010 ADAPTER
043-004. [01] 09092-10010 WASHER
043-005. [01] 09089-40010 E-RING
043-006. [2C] 94901-33880 WASHER, PLATE, SK
043-006. [2C] 94901-34020 WASHER, PLATE, SK
043-006. [2C] 94901-34030 WASHER, PLATE, SK
043-006. [2C] 94901-34040 WASHER, PLATE, SK
043-006. [2C] 94901-37880 WASHER, PLATE, SK
044. [01] 09092-30011 NUT, ADAPTER LOCK
045. [04] 94904-71760 BOLT, W/WASHER
046. [02] 94904-71750 BOLT, W/WASHER
047. [01] 94915-01030 SEAL, OIL
049. [01] 09107-15510 LEVER, ADJUSTING
051. [01] 94904-71190 BOLT, W/WASHER
052. [01] 09109-40060 CAP, LEVER 22183-73600-71
053. [01] 09109-01581 LEVER SUB-ASSY, ST
055. [02] 91418-06201 BOLT, W/WASHER
056. [01] 09105-10930 PLATE, COVER
057. [02] 94904-72700 BOLT, W/WASHER
058. [01] 91418-06141 BOLT, W/WASHER
059. [01] 09116-70050 PLUG, SCREW
060. [02] 09024-10010 WASHER, AIR BLEEDE 22191-73600-71
061. [01] 09103-10030 NUT, CAP
062. [01] 94901-81550 WASHER, COPPER PLA
063. [01] 94906-21350 PACKING, RUBBER PL
064. [01] 09103-80040 SPRING, B 22194-73600-71
065. [01] 94914-01640 O-RING
066. [01] 09101-60020 BUSHING, BEARING
066. [01] 09101-60360 BUSHING, BEARING
067. [01] 09104-30010 COVER, SPRING 22721-78601-71
068. [01] 09103-80050 SPRING, B 22198-73600-71
069. [01] 09103-50240 SHAFT, MECHANICAL 22199-73600-71
070. [01] 09103-60010 CUP, SPRING 22211-73600-71
071. [01] 09103-40161 LEVER, SUPPORT
072. [01] 09104-20010 SPRING, RETURN
073. [01] 09103-30030 PLATE, CAP 22214-73600-71
074. [01] 09103-80030 SPRING, B 22215-73600-71
075. [01] 94913-00030 KEY, WOODRUFF
076. [01] 09082-30460 GASKET
077. [01] 09082-30420 GASKET
088. [01] 94905-03390 NUT, HEXAGON
089. [02] 94901-81020 WASHER, COPPER PLA 90201-08106
090. [01] 94914-03390 O-RING

Include in #3:

09200-01911 as GOVERNOR ASSY, MEC
19080-05031

Cross reference number



Part num Firm num Firm Name
19080-05031    GOVERNOR ASSY, MEC




Information:

Oil seals
When driving oil seals into place, follow the instructions below: Driving Seals into Housing:(a) Place the seal lip correctly. Make sure it is not damaged.(b) Before driving a seal into place, apply a light coat of grease to the periphery of the seal that fits into the housing.(c) Use a driving tool like the one shown in the illustration that is specifically designed for the purpose. The tool can properly guide the lip and hold evenly the top of the seal when it is tapped, so it allows the seal to be driven straight down. Do not use hammers on bare seals as seal will be damaged.
Oil seal driving tool Driving Seals onto Shaft:(a) Coat the seal lip with grease.(b) Use seal guide like the one shown in the illustration when the shaft has steps, splines, threads or keyways.
Oil seal guideO-Rings
Use a guide when it is necessary to move O-rings over steps, splines, threads or keyways to install them. Apply a light coat of grease to O-rings before fitting them.
O-ring guideBearings
(1) When driving bearing into place, be sure to tap the race that is being fitted. (If the inner race is being fitted, tap the inner race. Likewise, if it is the outer race that is being fitted, tap the outer race.)Use fitting tools like the ones in the illustration that are appropriate for inner or outer races.
Bearing fitting tool(2) Bearings are best fitted using a press as shock loads and errors can be minimized.
Fitting bearing using a pressLock Plates
Always bend lock plates properly. The illustration on the right show some of typical lock plates being bent properly and improperly.
Typical lock plates with good and bad bendsSplit Pins and Spring Pins
As a rule, all split pins must be replaced with new ones after each removal. It is also important to bend split pins properly. Spring pins must be driven into place completely.

Have questions with 19080-05031?





Group cross 19080-05031

Back to top