Fuel injectors
  1. Home
  2. denso
  3. #19010-01130

19010-01130 BODY ASSY, INJECTI Denso Cross


 

Information body assy, injecti

19010-01130 BODY ASSY, INJECTI
Rating:
24
Buy BODY ASSY, INJECTI 19010-01130 genuine, new aftermarket engine parts with delivery

KIT List:

Body assy, injecti 1904400320
Body assy, injecti 1904400320

Scheme ###:

BODY ASSY, INJECTI
000. [01] 19010-01130 BODY ASSY, INJECTI ME743078
001. [01] 19011-05170 HOUSING KIT, INJEC ME736229
001-001. [03] 94904-30010 BOLT, STUD ME702091
003. [04] 09013-10330 HOLDER, DELIVERY V MM501668
004. [04] 09013-30030 STOPPER, DELIVERY ME022082
005. [04] 09013-61180 SPRING, DELIVERY V ME736260
006. [04] 09013-70100 GASKET, DELIVERY V ME702053
007. [04] 09014-00660 VALVE SUB-ASSY, IN MM500343
008. [04] 09015-03360 ELEMENT SUB-ASSY, ME736951
009. [04] 09015-60010 PINION, PLUNGER CO ME702058
010. [04] 09015-70010 SCREW, PLUNGER CON ME702059
011. [04] 09016-10330 SLEEVE, PLUNGER CO ME702060
012. [04] 09016-30191 SEAT, SPRING, UPR ME736080
013. [04] 09016-40090 SPRING, PUMP PLUNG ME702554
014. [04] 09016-50160 SEAT, SPRING, LWR MM514055
015. [04] 09017-00070 TAPPET SUB-ASSY,IN ME702556
016. [04] 09018-90090 PLUG, INJECTION PU ME703276
017. [01] 09019-11610 CAMSHAFT, INJECTIO ME736674
018. [01] 09019-30020 RING, CAMSHAFT ADJ ME702074
019. [3C] 09019-40400 PLATE, CAMSHAFT SH ME728352
019. [3C] 09019-40290 PLATE, CAMSHAFT SH ME703274
019. [3C] 09019-40150 PLATE, CAMSHAFT SH ME703273
019. [3C] 09019-40140 PLATE, CAMSHAFT SH ME703272
019. [3C] 09019-40110 PLATE, CAMSHAFT SH ME703583
019. [3C] 09019-40060 PLATE, CAMSHAFT SH ME022103
019. [3C] 09019-40050 PLATE, CAMSHAFT SH ME022102
019. [3C] 09019-40040 PLATE, CAMSHAFT SH ME022101
019. [3C] 09019-40030 PLATE, CAMSHAFT SH ME022100
019. [3C] 09019-40020 PLATE, CAMSHAFT SH ME022099
019. [3C] 09019-40010 PLATE, CAMSHAFT SH ME702075
020. [01] 09020-10351 COVER, BEARING ME703059
021. [01] 09020-60150 GASKET, BEARING CO ME728350
022. [01] 09021-20020 RACK, CONTROL MM500699
023. [01] 09021-50060 SCREW, RACK GUIDE ME728163
024. [06] 09022-20070 WASHER, FUEL PIPE ME702217
025. [02] 09023-00050 PLATE SET, VALVE H ME702558
026. [04] 94914-02570 O-RING ME702098
027. [02] 09025-10010 WASHER, INJECTION ME702595
028. [01] 09027-01460 COVER SUB-ASSY, IN ME736539
028-001. [02] 09024-30030 PACKING, AIR BLEED ME702057
028-002. [01] 09027-20210 GASKET, INJECTION ME703052
028-003. [01] 09027-50182 PROCESSING DRAWING ME703051
028-004. [02] 09027-60030 SCREW ME703028
029. [4C] 09031-10100 PLATE, TAPPET ADJU MM500308
029. [4C] 09031-10110 PLATE, TAPPET ADJU MM500309
029. [4C] 09031-10120 PLATE, TAPPET ADJU MM500310
029. [4C] 09031-10130 PLATE, TAPPET ADJU MM500311
029. [4C] 09031-10140 PLATE, TAPPET ADJU MM500312
029. [4C] 09031-10150 PLATE, TAPPET ADJU MM500313
029. [4C] 09031-10290 PLATE, TAPPET ADJU ME728060
029. [4C] 09031-10090 PLATE, TAPPET ADJU MM500307
029. [4C] 09031-10080 PLATE, TAPPET ADJU MM500306
029. [4C] 09031-10010 PLATE, TAPPET ADJU ME702559
029. [4C] 09031-10020 PLATE, TAPPET ADJU MM500300
029. [4C] 09031-10030 PLATE, TAPPET ADJU MM500301
029. [4C] 09031-10040 PLATE, TAPPET ADJU MM500302
029. [4C] 09031-10050 PLATE, TAPPET ADJU MM500303
029. [4C] 09031-10060 PLATE, TAPPET ADJU MM500304
029. [4C] 09031-10070 PLATE, TAPPET ADJU MM500305
030. [03] 90160-06051 NUT, HEXAGON ME702588
031. [03] 90258-06001 WASHER, SPRING ME702596
032. [04] 91418-06201 BOLT, W/WASHER ME702041
033. [01] 94910-10120 BEARING, ROLLER ME702096
034. [01] 09031-00110 VALVE ASSY, OVERFL ME702087
035. [01] 94914-00380 O-RING ME702097
036. [01] 94918-00060 SCREW, HOLLOW ME702598
037. [01] 94918-00310 SCREW, HOLLOW ME702236
043. [01] 94910-10071 BEARING, ROLLER ME702562
044. [01] 09019-30050 RING, CAMSHAFT ADJ ME702073
046. [3C] 09019-40410 PLATE, CAMSHAFT SH ME728353
046. [3C] 09019-40360 PLATE, CAMSHAFT SH ME703469
046. [3C] 09019-40350 PLATE, CAMSHAFT SH ME703468
046. [3C] 09019-40340 PLATE, CAMSHAFT SH ME703467
046. [3C] 09019-40170 PLATE, CAMSHAFT SH ME703271
046. [3C] 09019-40160 PLATE, CAMSHAFT SH ME703270
046. [3C] 09019-40100 PLATE, CAMSHAFT SH MM500694
046. [3C] 09019-40090 PLATE, CAMSHAFT SH MM500693
046. [3C] 09019-40080 PLATE, CAMSHAFT SH MM500692
046. [3C] 09019-40070 PLATE, CAMSHAFT SH ME702076
047. [01] 09031-00420 VALVE ASSY, OVERFL ME736179
048. [01] 94918-10160 NIPPLE, SWIVELING ME728845

Include in #3:

09300-05651 as BODY ASSY, INJECTI
19010-01130

Cross reference number



Part num Firm num Firm Name
19010-01130  ME743078  BODY ASSY, INJECTI
ME743078    MITSUBISHI BODY ASSY, INJECTI




Information:

2. Loosen bolts (3) from the belt tightener bracket. Remove belts (2) from the fan drive.3. Disconnect the fan drive lubrication tube from the support block.4. Remove nuts (1) from the fan drive bracket. Remove the fan drive from the pump drive cover studs.Install Fan Drive
1. Put fan drive (1) in position on pump drive cover studs (4). Install the nuts that hold the fan drive.2. Connect lubrication line (2) to support block (3).3. Install the belts on the fan drive, crankshaft pulley and belt tightener bracket. Tighten the belts to have an adjustment of belt deflection (movement) to 7/8" (22.2 mm) under 25 lb. (110 N) force half way between pulleys.4. Tighten the 5/8" diameter bolt on the belt tightener bracket to a torque of 75 10 lb.ft. (100 14 N m). Tighten the 1/2" diameter bolt to a torque of 40 5 lb.ft. (55 7 N m).5. Install the belts on the alternator and the fan drive. Check the belt deflection (movement) again as in Step 3.end by:a) install fan assemblyDisassemble Fan Drive
start by:a) remove fan drive 1. Remove lubrication tube (1) from the fan drive.2. Remove bolts (3) from fan drive adapter (2). Remove the adapter. 3. Remove bolts (4) and washer (5). Remove seal (6). 4. Remove pulley (9) from bracket (7).5. Remove bearing (11) and spacer (10) from the pulley. Remove spacer (8), seal (12) and bearing (13) from the pulley.Assemble Fan Drive
1. Install bearing (2) in the rear of pulley (3). 2. Put 5P960 Multipurpose Grease on the lip of the seal. Install the lip type seal (1) with tooling (A). The lip of the seal must be away from the bearing.3. Install spacer (5) so the end with the taper is toward the lip type seal.4. Install spacer (6) and bearing (4) in the front of the pulley. 5. Put seal (7) on front of the pulley. Install the pulley on bracket (8).6. Put the washer in position on the bracket shaft and install the bolts that hold the pulley in position on bracket.7. Install the lubrication tube and fill with 5P960 Multipurpose Grease.end by:a) install fan drive

Have questions with 19010-01130?





19010-02020 BODY ASSY, INJECTI 19010-02010 19010-02000 19010-01980 19010-01970
04203-00033 BODY ASSY, INJECTI 04203-20112 04203-30000 09010-01010 0901001180

Group cross 19010-01130

Back to top