Information pump assy, injecti
Nozzle:
0935000830
Rating:
KIT List:
| Body assy, injecti | 1904400360 |
| Governor assy, mec | 1908900170 |
| Pump assy, fuel fe | 1922900060 |
Components :
| 001. | PUMP ASSY, INJECTI | 19000-06890 |
| 002. | BODY ASSY, INJECTI | 09010-04861 |
| 003. | GOVERNOR ASSY, MEC | 09080-07930 |
| 004. | PUMP ASSY, FUEL FE | 09210-01540 |
Scheme ###:
| 000. | [01] | 19000-06890 | PUMP ASSY, INJECTI | ME008330 |
| 006. | [01] | 09010-04861 | BODY ASSY, INJECTI | ME703936 |
| 007. | [01] | 09080-07930 | GOVERNOR ASSY, MEC | |
| 008. | [01] | 94905-02450 | NUT, HEXAGON | ME008351 |
| 009. | [01] | 94901-50500 | WASHER, SPRING | ME008373 |
| 010. | [01] | 94913-00190 | KEY, WOODRUFF | ME703361 |
| 012. | [01] | 09210-01540 | PUMP ASSY, FUEL FE | ME703397 |
| 015. | [01] | 91518-08221 | BOLT, W/WASHER | MM500963 |
| 016. | [05] | 91418-06161 | BOLT, W/WASHER | ME702149 |
| 017. | [01] | 91518-06121 | BOLT, W/WASHER | ME703399 |
| 018. | [01] | 09001-80081 | COVER, CONTROL RAC | ME702034 |
| 019. | [01] | 09006-00140 | COVER SUB-ASSY, TI | ME006130 |
| 020. | [04] | 94901-15020 | WASHER, STEEL PLAT | MH005068 |
| 021. | [04] | 90258-10001 | WASHER, SPRING | MC327716 |
| 022. | [04] | 91266-10081 | NUT, HEXAGON | MF430122 |
| 023. | [01] | 94914-03990 | O-RING | MH035501 |
Include in #3:
19000-06890
as PUMP ASSY, INJECTI
Cross reference number
| Part num | Firm num | Firm | Name |
| 19000-06890 | ME008330 | PUMP ASSY, INJECTI | |
| ME008330 | MITSUBISHI | PUMP ASSY, INJECTI |
Information:
Start By:a. remove valve coversb. remove fuel injection lines 1. Use tool (A) and a 5P328 crowfoot wrench (7/8") to loosen the fuel injection line nut at the nozzle end.
Do not let the tops of the fuel nozzles turn when the fuel lines are loosened. The nozzles will be damaged if the top of the nozzles turn in the body.
2. Use tool (B) to loosen the nut at the fuel injection line adapter end. Remove inner fuel injection lines (1). Install plugs in the fuel injection nozzles. 3. Remove the nut that holds the adapters to the cylinder head assembly. Remove fuel injection line adapters (2).Install Fuel Injection Line Adapters
1. Check the condition of O-ring seal (1) on fuel injection line adapter (2) for damage. Make a replacement if necessary.2. Lubricate O-ring seal (1) with clean engine oil. Install fuel injection line adapter (2). Tighten the retaining nut to a torque of 13.6 2.7 N m (10 2 lb ft). 3. Check the condition of the O-ring seal on inner fuel line (3) for damage, and make a replacement if necessary. Install inner fuel line (3).
Do not let the tops of the fuel nozzles turn when the fuel lines are tightened. The nozzles will be damaged if the top of the nozzles turn in the body.
4. Use tooling (A) to tighten the inner fuel line nuts to a torque of 42 6.8 N m (32 5 lb ft).End By:a. install fuel injection linesb. install valve covers
Do not let the tops of the fuel nozzles turn when the fuel lines are loosened. The nozzles will be damaged if the top of the nozzles turn in the body.
2. Use tool (B) to loosen the nut at the fuel injection line adapter end. Remove inner fuel injection lines (1). Install plugs in the fuel injection nozzles. 3. Remove the nut that holds the adapters to the cylinder head assembly. Remove fuel injection line adapters (2).Install Fuel Injection Line Adapters
1. Check the condition of O-ring seal (1) on fuel injection line adapter (2) for damage. Make a replacement if necessary.2. Lubricate O-ring seal (1) with clean engine oil. Install fuel injection line adapter (2). Tighten the retaining nut to a torque of 13.6 2.7 N m (10 2 lb ft). 3. Check the condition of the O-ring seal on inner fuel line (3) for damage, and make a replacement if necessary. Install inner fuel line (3).
Do not let the tops of the fuel nozzles turn when the fuel lines are tightened. The nozzles will be damaged if the top of the nozzles turn in the body.
4. Use tooling (A) to tighten the inner fuel line nuts to a torque of 42 6.8 N m (32 5 lb ft).End By:a. install fuel injection linesb. install valve covers