Information head sub-assy, dis
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
VE Pump Head Rotor 4/9R 096400-0242 Fit Intended For Engine 2C
Generic spare parts || autoparts || machinery parts || engine parts
Generic spare parts || autoparts || machinery parts || engine parts
$79.93
01 Feb 2024
CN: Diesel Injection Par
Diesel Engine Pump Parts 096400-0242 0242 VE Head Rotor 0964000242 4/9R 9mm Right
Generic Manufacturer Part Number:096400-0242 ,0964000242 ，Stamping No.0242 . || More Detail:VE Head Rotor 096400-0242,4 cylinders, 4/9R 9mm Right. || Premium quality: Our Head Rotor Diesel Fuel Injection Pump Parts are made of high-quality materials, ensuring durability and longevity. || Upgrade your diesel engine's performance with the Head Rotor. This high-quality head rotor is the key to unlocking maximum power and efficiency for your vehicle.Whether you're looking for improved fuel efficiency, smoother operation, or enhanced acceleration, this pump rotor head will deliver superior results. || Application: Fits for TOYOTA 2C Engine.
Generic Manufacturer Part Number:096400-0242 ,0964000242 ，Stamping No.0242 . || More Detail:VE Head Rotor 096400-0242,4 cylinders, 4/9R 9mm Right. || Premium quality: Our Head Rotor Diesel Fuel Injection Pump Parts are made of high-quality materials, ensuring durability and longevity. || Upgrade your diesel engine's performance with the Head Rotor. This high-quality head rotor is the key to unlocking maximum power and efficiency for your vehicle.Whether you're looking for improved fuel efficiency, smoother operation, or enhanced acceleration, this pump rotor head will deliver superior results. || Application: Fits for TOYOTA 2C Engine.
$245.39
24 Jul 2024
KR: Adabus
Diesel Injection Rotor Head Or Pump Head Rotor 096400-0242
Generic Origin: Mainland China || Oem no.: 096400-0242
Generic Origin: Mainland China || Oem no.: 096400-0242
You can express buy:
USD 46.5
13-05-2025
13-05-2025
Pump head, rotor head 096400-0242, VE head rotor, 4 cylinders / 9mm right, without spring, for injection oil pump, fuel engine
USD 45
13-05-2025
13-05-2025
Diesel High Pressure Fuel Pump VE4 Rotor Head 0964000242 0964001060 0964000232 0964001330 096400-1210 4 Cylinder VE Head Rotor
USD 45
13-05-2025
13-05-2025
VLONG High Quality New Diesel Engine Fuel Pump VE Head Rotor VE4/9R 4/9R 9MM Right 4 Cyl Rotor Head 0964000242 096400-0242
Images:
USD 46.5
[13-May-2025]
USD 55.69
[03-Nov-2018]
USD 55.69
[01-Jul-2019]
USD 55.69
[03-Nov-2018]
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 09640-00242 | 22140-6440 | HEAD SUB-ASSY, DIS |
Information:
1. Disconnect water supply hose from water pump inlet.2. Remove connector pipe (1), remove two bolts (2) and remove oil fill pipe (3). 3. Remove bolts (4) and (5) then remove the water pump. The following steps are for the installation of the water pump.4. Position the water pump and install two bolts (5) and (6). Tighten the two bolts evenly.5. Position connector pipe (1) and gaskets then install the bolts.6. Install oil fill pipe (3). Be sure the gasket is in position between the regulator and pipe and install bolts (2).End By:a. Install alternator (if removed)b. Fill the cooling system to the specified level. See the Maintenance Manual.Disassemble And Assemble Water Pump
Start By:a. remove water pump 1. Remove three bolts (1) and remove cover (2). 2. Use an M12 X 1.75 bolt to force impeller (3) from shaft (4). Install forcing bolt in impeller as indicated by arrow. Hold impeller and screw bolt in until impeller comes off shaft. 3. Remove bolt (5), washer (6), bearing (7) and gear (8). 4. Remove three bolts (9) and remove cover (10) with bearing (11). 5. Press shaft (4) out of seal (12).
Do not allow shaft (4) to fall to the floor, damage may occur to the shaft.
6. Remove seal (12) and seal (13) from water pump housing. The following steps are for the assembly of the water pump. 7. Using driver group, install seal (13). Refer to illustration to see direction of seal lip. Lubricate shaft seal area with engine oil.8. Assemble shaft (4), bearing (11) and cover (10). Position assembly into seal and housing then install bolts (9). 9. Position the housing and shaft assembly in a press. Position seal (12) on shaft (4). 10. Position tool (A) and press seal into place. 11. Position the water pump in a press, position impeller (3) and press it into place. Dimension X is 1.5 0.5 mm (.059 .020 in.).12. Position seal and cover (2), then install bolts (1).End By:a. install water pump
Start By:a. remove water pump 1. Remove three bolts (1) and remove cover (2). 2. Use an M12 X 1.75 bolt to force impeller (3) from shaft (4). Install forcing bolt in impeller as indicated by arrow. Hold impeller and screw bolt in until impeller comes off shaft. 3. Remove bolt (5), washer (6), bearing (7) and gear (8). 4. Remove three bolts (9) and remove cover (10) with bearing (11). 5. Press shaft (4) out of seal (12).
Do not allow shaft (4) to fall to the floor, damage may occur to the shaft.
6. Remove seal (12) and seal (13) from water pump housing. The following steps are for the assembly of the water pump. 7. Using driver group, install seal (13). Refer to illustration to see direction of seal lip. Lubricate shaft seal area with engine oil.8. Assemble shaft (4), bearing (11) and cover (10). Position assembly into seal and housing then install bolts (9). 9. Position the housing and shaft assembly in a press. Position seal (12) on shaft (4). 10. Position tool (A) and press seal into place. 11. Position the water pump in a press, position impeller (3) and press it into place. Dimension X is 1.5 0.5 mm (.059 .020 in.).12. Position seal and cover (2), then install bolts (1).End By:a. install water pump