Information pump assy, injecti
Rating:
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 09600-03524 | 22100-5506 | PUMP ASSY, INJECTI |
Information:
Piston Pin Bearing Removal And Installation (Connecting rods that have a taper on the piston pin end).
The 5P8639 Press Group and the 5P9705 Tool Group are used to remove and install the piston pin bearings in the connecting rods. Use the procedure that follows to remove and install the piston pin bearing from the connecting rod.Remove the crankshaft bearing from the large end of the connecting rod and install the cap on the rod.Put the connecting rod in an oven and get the temperature of the rod to 400°F (204°C).Put the 5P9704 Spacer in the counterbore of the base plate. Be sure the spacer is in the bore straight and is against the bottom of the counterbore. Put the connecting rod, with the Part Number up, on the base plate so that the post assembly is in the center of the piston pin bearing.Install the pin for the large end of the connecting rod in the center of the bearing bore. Put the 5P8653 Adapter over the post assembly and into the piston pin bearing. Make sure the alignment
The 5P8639 Press Group and the 5P9705 Tool Group are used to remove and install the piston pin bearings in the connecting rods. Use the procedure that follows to remove and install the piston pin bearing from the connecting rod.Remove the crankshaft bearing from the large end of the connecting rod and install the cap on the rod.Put the connecting rod in an oven and get the temperature of the rod to 400°F (204°C).Put the 5P9704 Spacer in the counterbore of the base plate. Be sure the spacer is in the bore straight and is against the bottom of the counterbore. Put the connecting rod, with the Part Number up, on the base plate so that the post assembly is in the center of the piston pin bearing.Install the pin for the large end of the connecting rod in the center of the bearing bore. Put the 5P8653 Adapter over the post assembly and into the piston pin bearing. Make sure the alignment