Information injector assy
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Common Rail Injector 095000-785X 095000-7772 095000-6952 095000-6951 095000-6811 Diesel Nozzle Reman - (Style: A, Color: 095000-6811)
Generic Color: 095000-6811
Generic Color: 095000-6811
Geofrey 1 Pcs Fuel Injector 095000-6593 095000-6590 095000-6951 Compatible with Hino 500 Ranger Kobelco J08E SK200-8 SK220-8 SK330-8 SK350-8
Geofrey Item Name: Fuel Injector || Part Number: 095000-6593 095000-6590 095000-6951 || Condition: New || Compatible with Hino 500 Ranger Kobelco J08E SK200-8 SK220-8 SK330-8 SK350-8 || Manufacturer Warranty: 6 Months
Geofrey Item Name: Fuel Injector || Part Number: 095000-6593 095000-6590 095000-6951 || Condition: New || Compatible with Hino 500 Ranger Kobelco J08E SK200-8 SK220-8 SK330-8 SK350-8 || Manufacturer Warranty: 6 Months
Geofrey 4 Pcs Fuel Injector 095000-6590 095000-6951 095000-6593 Compatible with Kobelco J08E SK200-8 SK220-8 SK330-8 SK350-8 Hino 500 Ranger
Geofrey Item Name: Fuel Injector || Part Number: 095000-6590 095000-6951 095000-6593 || Condition: New || Compatible with Kobelco J08E SK200-8 SK220-8 SK330-8 SK350-8 Hino 500 Ranger || Manufacturer Warranty: 6 Months
Geofrey Item Name: Fuel Injector || Part Number: 095000-6590 095000-6951 095000-6593 || Condition: New || Compatible with Kobelco J08E SK200-8 SK220-8 SK330-8 SK350-8 Hino 500 Ranger || Manufacturer Warranty: 6 Months
You can express buy:
USD 510
20-10-2022
20-10-2022
Remanufactured fuel injector 095000-6952 095000-6951 095000-6950 23670-E0330
Components :
| 001. | INJECTOR ASSY | 09500-06951 |
Scheme ###:
| 000. | [01] | 09500-06951 | INJECTOR ASSY | 23670-E0330 |
Include in #3:
09500-06951
as INJECTOR ASSY
Cross reference number
| Part num | Firm num | Firm | Name |
| 09500-06951 | 23670-E033 | INJECTOR ASSY |
Information:
Start By:a. remove governor **See Disassemble Governor story
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove the bolts and the plate from the side of the fuel injection pump housing. 2. Install tool (A) in the fuel injection pump housing. Move the rack until tool (A) can be installed to hold the rack in the center position to remove the fuel injection pumps.3. Use tool (B) to remove bushing (1).4. Remove the O-ring seal from the fuel injection pump housing. 5. Install tool (C) on the bonnet and remove the fuel injection pump. 6. Remove spacer (2). Keep the spacers (2) from the fuel injection pumps together with identification as to their location in the pump housing.7. Perform steps 3 through 6 to remove the other fuel injection pumps. The following steps are to install the fuel injection pumps.8. Install spacer (2).9. Install tool (A). Move the rack until tool (A) can be installed to hold the rack in the center position. The rack must be in the center position to install the fuel injection pumps.10. Turn camshaft until the lobe of the camshaft is down for the pump to be installed.11. Install tool (C) on the bonnet on the fuel injection pump.12. Install the fuel injection pump in the pump housing with saw cut slot in the gear in alignment with the small pin and groove in the barrel in alignment with dowel in the pump housing.13. Put clean oil on O-ring seal and install it in the fuel injection pump housing.14. Install the bushing by hand until the bushing is even with the top of the housing. If the bushing can not be installed this far by hand, remove it. Remove the fuel injection pump ad put the pump in alignment again and install the bushing again.15. Install tool (B) on the bushing and tighten the bushing to a torque of 190 14 N m (140 10 lb ft).16. Install tooling (D) to measure total rack travel. Correct rack travel is 15.7 mm (.618 in). A smaller measurement is an indication of improper fuel injection pump installation.17. Perform Steps 1 through 9 to install the other fuel pumps18. Install the cover and gasket on the fuel injection pump housing.End By:a. install governor **See Assemble Governor storyDisassemble And Assemble Fuel Injection Pumps
Start By:a. remove fuel injection pumps
When the injection pumps are disassembled, handle the parts carefully. Do not damage the surfaces of the plungers, barrels and bonnets. Any scratches will cause leakage inside the fuel injection pump. The plunger and barrel for each pump are made as a set. Do not intermix the plunger of one pump in the barrel with another pump. If one part is worn, install a complete new pump assembly. Be careful when placing the plunger into the bore of the barrel.
1. Pull plunger (1) and washer (5) out of barrel (3) and spring (2).
Do not remove the gear from
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove the bolts and the plate from the side of the fuel injection pump housing. 2. Install tool (A) in the fuel injection pump housing. Move the rack until tool (A) can be installed to hold the rack in the center position to remove the fuel injection pumps.3. Use tool (B) to remove bushing (1).4. Remove the O-ring seal from the fuel injection pump housing. 5. Install tool (C) on the bonnet and remove the fuel injection pump. 6. Remove spacer (2). Keep the spacers (2) from the fuel injection pumps together with identification as to their location in the pump housing.7. Perform steps 3 through 6 to remove the other fuel injection pumps. The following steps are to install the fuel injection pumps.8. Install spacer (2).9. Install tool (A). Move the rack until tool (A) can be installed to hold the rack in the center position. The rack must be in the center position to install the fuel injection pumps.10. Turn camshaft until the lobe of the camshaft is down for the pump to be installed.11. Install tool (C) on the bonnet on the fuel injection pump.12. Install the fuel injection pump in the pump housing with saw cut slot in the gear in alignment with the small pin and groove in the barrel in alignment with dowel in the pump housing.13. Put clean oil on O-ring seal and install it in the fuel injection pump housing.14. Install the bushing by hand until the bushing is even with the top of the housing. If the bushing can not be installed this far by hand, remove it. Remove the fuel injection pump ad put the pump in alignment again and install the bushing again.15. Install tool (B) on the bushing and tighten the bushing to a torque of 190 14 N m (140 10 lb ft).16. Install tooling (D) to measure total rack travel. Correct rack travel is 15.7 mm (.618 in). A smaller measurement is an indication of improper fuel injection pump installation.17. Perform Steps 1 through 9 to install the other fuel pumps18. Install the cover and gasket on the fuel injection pump housing.End By:a. install governor **See Assemble Governor storyDisassemble And Assemble Fuel Injection Pumps
Start By:a. remove fuel injection pumps
When the injection pumps are disassembled, handle the parts carefully. Do not damage the surfaces of the plungers, barrels and bonnets. Any scratches will cause leakage inside the fuel injection pump. The plunger and barrel for each pump are made as a set. Do not intermix the plunger of one pump in the barrel with another pump. If one part is worn, install a complete new pump assembly. Be careful when placing the plunger into the bore of the barrel.
1. Pull plunger (1) and washer (5) out of barrel (3) and spring (2).
Do not remove the gear from