Information injector assy
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
6 PCS 095000-5990 0950005990 Fuel Injector Fits for Hino Engine J05D Truck 500 Series
CNCJNXW ★Part Name★:6 PCS Fuel Injector || ★Part Number★:095000-5990 0950005990 || ★Application★:Fits for Hino Engine J05D Truck 500 Series || NOTE Please check the part number before purchase, do not only look at the appearance of the purchase, check the part number is the best way to reduce the error rate. If you are not clear, please contact us, we are very happy to serve you! || Worth Choice Our product quality is reliable, after-sales guarantee! If you have any questions, please contact us in time, communication is the best way to solve the problem!
CNCJNXW ★Part Name★:6 PCS Fuel Injector || ★Part Number★:095000-5990 0950005990 || ★Application★:Fits for Hino Engine J05D Truck 500 Series || NOTE Please check the part number before purchase, do not only look at the appearance of the purchase, check the part number is the best way to reduce the error rate. If you are not clear, please contact us, we are very happy to serve you! || Worth Choice Our product quality is reliable, after-sales guarantee! If you have any questions, please contact us in time, communication is the best way to solve the problem!
XYo 095000-5990 0950005990 Fuel Injector Fits for Denso Hino Engine J05D Truck 500 Series (Pack of 1)
XYohykai ◆Part Name◆:Fuel Injector || ◆Part Number◆:095000-5990 0950005990 || ◆Application◆:Fits for Denso Hino Engine J05D Truck 500 Series || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || ◆Worth Choice◆-This product has stable performance high reliability easy installation and fast response.
XYohykai ◆Part Name◆:Fuel Injector || ◆Part Number◆:095000-5990 0950005990 || ◆Application◆:Fits for Denso Hino Engine J05D Truck 500 Series || ◆Notice◆-Application information provided is for reference only. Please confirm the part number and compare old parts before purchase. If you have any question,pls feel free to ask us. || ◆Worth Choice◆-This product has stable performance high reliability easy installation and fast response.
1PCS Fuel Injector fits 095000-5990 for Denso Hino Engine J05D Truck 500 Series
TUWODE Part Number: 095000-5990 || Item Type: Fuel Injector || Applicable Models: for Denso Hino Engine J05D Truck 500 Series || Well-functioning fuel injectors ensure the correct air-fuel ratio, which is essential for minimizing harmful emissions. || Fuel is broken into fine droplets for optimal air mixing and enhanced combustion efficiency.
TUWODE Part Number: 095000-5990 || Item Type: Fuel Injector || Applicable Models: for Denso Hino Engine J05D Truck 500 Series || Well-functioning fuel injectors ensure the correct air-fuel ratio, which is essential for minimizing harmful emissions. || Fuel is broken into fine droplets for optimal air mixing and enhanced combustion efficiency.
You can express buy:
USD 161.31
30-04-2025
30-04-2025
095000-5990 23670-E0310 23670-E0311 SINOCMP 1PCS Fuel Injector For Hino Excavator J05D Truck 500 Engine New
USD 260
15-07-2022
15-07-2022
Common Rail Injector Assembly 095000-5990 095000-6353 For Denso
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 09500-05990 | 23910-1410 | INJECTOR ASSY | |
| 23910-1410 | HINO | INJECTOR ASSY | |
| 23670-E0311 | HINO | INJECTOR ASSY | |
| 23670-E0310 | HINO | INJECTOR ASSY | |
| 16650Z504A | UD TRUCKS | INJECTOR ASSY | |
| 16650Z501E | UD TRUCKS | INJECTOR ASSY |
Information:
Introduction
This Special Instruction provides information in order to prolong the life of the cutting bits on the PM-465 rotor. An additional spray nozzle was added to the left side of the chamber.Rework Procedure
Table 1
Required Parts
Quantity Part Number Description
1 211-8607 Tube
1 211-8604 Plate
1 1G-6699 Adapter
1 1G-8270 Nozzle Body
2 5D-1026 Hose Clamp
1000 mm (39 inch) 5P-1690 Hose
1 081-2963 Cap
1 081-2965 Seal
1 115-9969 Male Connector
1 115-9970 Male Connector
1 212-0911 Nozzle
Illustration 1 g00853436
(A) 573 mm (22.56 inches) (B) 102.5 mm (4 inches) (C) 150 mm (5.91 inches)
Remove 142-7461 Plate (1) from the chamber.
Relocate the 142-7461 Plate (1) .
The new location of the 142-7461 Plate (1) should measure 150 mm (5.91 inches) (C) from the top of the chamber. The center of the 142-7461 Plate should remain at 573 mm (22.56 inches) (A) .
Cut a slot in the left side of the chamber that is 40 mm (1.57 inch) by 85 mm (3.35 inch). The center of the slot should measure 102.5 mm (4 inches) from the top (B) of the chamber and 573 mm (22.56 inches) from the front (A) of the chamber. Refer to Illustration 1.
Illustration 2 g00853889
Weld the 211-8604 Plate (2) in the slot. The plate should be flush with the inside of the chamber. Face the open end of the plate downward in the slot.
Illustration 3 g00853468
Illustration 4 g00853890
(D) 20 mm (0.79 inch) (E) 8.5 mm (0.33 inch)
Weld a 211-8607 Tube (3) onto the side of the chamber. Position the bottom of the tube 20 mm (0.79 inch) (D) from the bottom of the slot and 8.5 mm (0.33 inch) (E) to the right of the slot. Refer to Illustration 4.
Illustration 5 g00853470
Remove hose assembly (4) from the nozzle (5) that is located near the left side of the chamber.
Replace connector (6) with 115-9970 Male Connector .
Illustration 6 g00863254
Use the following parts in order to assemble a new nozzle: 115-9969 Male Connector (7), 1G-6699 Adapter (8), 1G-8270 Nozzle Body (9), 212-0911 Nozzle (10), 081-2965 Seal (11) and 081-2963 Cap (12) .
Illustration 7 g00853509
Place the new nozzle assembly in tube (13) that is located on the side of the chamber.Note: The flat spray pattern of the nozzle should be parallel to the slot.
Connect the two nozzles with a 5P-1690 Hose . Use two 5D-1026 Hose Clamps in order to secure the hose to the nozzles.
This Special Instruction provides information in order to prolong the life of the cutting bits on the PM-465 rotor. An additional spray nozzle was added to the left side of the chamber.Rework Procedure
Table 1
Required Parts
Quantity Part Number Description
1 211-8607 Tube
1 211-8604 Plate
1 1G-6699 Adapter
1 1G-8270 Nozzle Body
2 5D-1026 Hose Clamp
1000 mm (39 inch) 5P-1690 Hose
1 081-2963 Cap
1 081-2965 Seal
1 115-9969 Male Connector
1 115-9970 Male Connector
1 212-0911 Nozzle
Illustration 1 g00853436
(A) 573 mm (22.56 inches) (B) 102.5 mm (4 inches) (C) 150 mm (5.91 inches)
Remove 142-7461 Plate (1) from the chamber.
Relocate the 142-7461 Plate (1) .
The new location of the 142-7461 Plate (1) should measure 150 mm (5.91 inches) (C) from the top of the chamber. The center of the 142-7461 Plate should remain at 573 mm (22.56 inches) (A) .
Cut a slot in the left side of the chamber that is 40 mm (1.57 inch) by 85 mm (3.35 inch). The center of the slot should measure 102.5 mm (4 inches) from the top (B) of the chamber and 573 mm (22.56 inches) from the front (A) of the chamber. Refer to Illustration 1.
Illustration 2 g00853889
Weld the 211-8604 Plate (2) in the slot. The plate should be flush with the inside of the chamber. Face the open end of the plate downward in the slot.
Illustration 3 g00853468
Illustration 4 g00853890
(D) 20 mm (0.79 inch) (E) 8.5 mm (0.33 inch)
Weld a 211-8607 Tube (3) onto the side of the chamber. Position the bottom of the tube 20 mm (0.79 inch) (D) from the bottom of the slot and 8.5 mm (0.33 inch) (E) to the right of the slot. Refer to Illustration 4.
Illustration 5 g00853470
Remove hose assembly (4) from the nozzle (5) that is located near the left side of the chamber.
Replace connector (6) with 115-9970 Male Connector .
Illustration 6 g00863254
Use the following parts in order to assemble a new nozzle: 115-9969 Male Connector (7), 1G-6699 Adapter (8), 1G-8270 Nozzle Body (9), 212-0911 Nozzle (10), 081-2965 Seal (11) and 081-2963 Cap (12) .
Illustration 7 g00853509
Place the new nozzle assembly in tube (13) that is located on the side of the chamber.Note: The flat spray pattern of the nozzle should be parallel to the slot.
Connect the two nozzles with a 5P-1690 Hose . Use two 5D-1026 Hose Clamps in order to secure the hose to the nozzles.