Information injector assy
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Injector 8-97603415-2 8-97603415-4 8-97603415-8 095000-5515 095000-5511 095000-5512 for Isuzu N-Series 4HK1 4JJ1
MGHOME Part Number: 8-97603415-2 8-97603415-4 8-97603415-8 095000-5515 095000-5511 095000-5512 || Applicable models: Fit for Isuzu N-Series 4HK1 4JJ1 || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
MGHOME Part Number: 8-97603415-2 8-97603415-4 8-97603415-8 095000-5515 095000-5511 095000-5512 || Applicable models: Fit for Isuzu N-Series 4HK1 4JJ1 || Safety: 100% Tested Before Shipping to Ensure Product Safety, Stability and Durability. || Function: High-quality material for long-lasting durability. Perfect match for the original car and easy to install || TIPS: Please be sure to compare carefully with photos and check part number before buying items, If you are not sure this part is suitable, please feel free to contact us, we'll reply you as soon as possible.
Fuel Injector 095000-5510 095000-5512 095000-5514 Compatible with Hitachi ZX450 Excavator Isuzu 6UZ1 6WF1 6WG1 Engine
TuneCrumph Part Number: 095000-5510 095000-5512 095000-5514 || Engine Model: for Isuzu Heavy Duty E-Series 6UZ1 6WF1 6WG1 Engine || Application: for Isuzu GIGA 6UZ1 Heavy Duty C/E-Series; for Isuzu 6WF1 Heavy Duty C/E-Series; for Hitachi ZX450 Excavator || Note: If you are unsure if the product is suitable.In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please check the product image and part number to ensure it is the product you want.Thank you for your support and understanding! || Tip: Please contact us - we are a professional sales team and we have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
TuneCrumph Part Number: 095000-5510 095000-5512 095000-5514 || Engine Model: for Isuzu Heavy Duty E-Series 6UZ1 6WF1 6WG1 Engine || Application: for Isuzu GIGA 6UZ1 Heavy Duty C/E-Series; for Isuzu 6WF1 Heavy Duty C/E-Series; for Hitachi ZX450 Excavator || Note: If you are unsure if the product is suitable.In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please check the product image and part number to ensure it is the product you want.Thank you for your support and understanding! || Tip: Please contact us - we are a professional sales team and we have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here.
YRGGHUI Fuel Injector 095000-5516 095000-5515 095000-5514 095000-5513 095000-5512 095000-5511 095000-5510 095000-5504 095000-5480
YRGGHUI OEM NO. :095000-5516 || Performance optimization: By adjusting and optimizing the fuel injectors, the performance and fuel economy of the engine can be improved. || Maintenance: Regular inspection and cleaning of fuel injectors are important measures to maintain engine performance, improve fuel efficiency, and optimize engine performance. || If you have any questions, please feel free to contact us and we will reply within 24 hours. Please inform us of the model year, model number, and code after placing the order. thank you! || Working principle: The electronic fuel injector controls the injection of fuel through a solenoid valve, which is controlled by the engine control unit (ECU). Fuel injectors are divided into two types: mechanical and electronic. Modern cars often use electronic fuel injectors.
YRGGHUI OEM NO. :095000-5516 || Performance optimization: By adjusting and optimizing the fuel injectors, the performance and fuel economy of the engine can be improved. || Maintenance: Regular inspection and cleaning of fuel injectors are important measures to maintain engine performance, improve fuel efficiency, and optimize engine performance. || If you have any questions, please feel free to contact us and we will reply within 24 hours. Please inform us of the model year, model number, and code after placing the order. thank you! || Working principle: The electronic fuel injector controls the injection of fuel through a solenoid valve, which is controlled by the engine control unit (ECU). Fuel injectors are divided into two types: mechanical and electronic. Modern cars often use electronic fuel injectors.
You can express buy:
USD 239.85
02-02-2023
02-02-2023
Denso diesel engine injector pump 095000-5512 fuel injector assembly 095000 5515 truck injection 095000551#
USD 239.85
31-01-2023
31-01-2023
095000-5516 inyector denso 095000 5511 denso common rail injector parts 0950005512
USD 125.9
13-11-2022
13-11-2022
ORLTL 095000-5512 (8976034152) CRDI Injector Assy Nozzle 0950005512 Common Rail Sprayer Injector 5512 For Isuzu 6WF1-TC
Images:
USD 13.29
[13-Nov-2022]
USD 125.9
[13-Nov-2022]
USD 42.99
[10-Nov-2022]
USD 17.9
[10-Nov-2022]
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 09500-05512 | 8-97603415 | INJECTOR ASSY |
Information:
Start By:a. remove fuel injection lines
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove bolts (1) and fan guard (2). 2. Loosen bolts (7), (9) and (10). Remove belts (8).3. Remove bolt (4) to clip. Remove grease line (3).4. Remove nuts (6). Remove cover (5) and the gasket. 5. Loosen bolt (12) enough to leave a gap of 3.18 mm (.125 in) between washers (11) and the fuel pump drive gear.6. Install tool (A) as shown. Tighten the stud to pull the fuel pump drive gear loose from the taper on the fuel injection pump camshaft.7. Remove tool (A), bolt (12), and washer (11). 8. Identify and disconnect wires (13).9. Remove tube assemblies (15) and (18).10. Remove two bolts (14), fuel transfer pump (17), and the O-ring seal.11. Remove bolts (16), the filter base, the gasket, and filter (19). 12. Fasten the fuel injection pump housing and governor to a hoist.13. Remove two bolts (22), three nuts (21), and the fuel injection pump housing and governor. The weight of the fuel injection pump housing and governor is 29 kg (64 lb.).14. Remove the two O-ring seals from the bottom of the fuel injection pump housing and governor. 15. Loosen screw (25). Remove two screws (26), control assembly (23) and spacers (24).Install Fuel Injection Pump Housing And Governor
Start By:a. remove fuel injection linesb. remove valve cover Number 1 piston must be set at top dead center (TDC) to perform all timing procedures. The engine is seen from the flywheel end when direction of crankshaft rotation is given. 1. Remove the starter.2. Install tool (B) on flywheel housing as shown.3. To find TDC for No. 1 piston;a. Turn the flywheel clockwise (opposite the direction of engine rotation) approximately 30 degrees. This removes all play from the timing gears. If you go past the bolt hole, you must repeat Step (a).b. Turn the flywheel counterclockwise until a 3/8" - 16 x 2 1/4" NC bolt (27) can be installed in the flywheel through the hole in the flywheel housing. The No. 1 and No. 6 pistons are now at top center position. The No. 1 piston is on the compression stroke when the valves of the No. 1 cylinder are closed. The rocker must be free to move up and down.4. If No. 1 piston is not on the compression stroke, remove the 3/8" - 16 x 2 1/4" NC bolt (27) and turn the flywheel 360° counterclockwise. Install the 3/8" bolt as before. The No. 1 piston is now at TDC.
Typical Example5. Install tooling (C) in the fuel injection pump housing as shown. Push on tooling (C) and turn injection pump camshaft (32). When tooling (C) engages the groove (slot) in the camshaft, the fuel injection pump is in the No. 1 piston TDC position.6. Be sure O-ring seals (28), (29), (30) and (31) are in position on the fuel injection pump housing and governor. Put clean engine oil
Keep all parts clean from contaminants. Contaminants put into the system may cause rapid wear and shortened component life.
1. Remove bolts (1) and fan guard (2). 2. Loosen bolts (7), (9) and (10). Remove belts (8).3. Remove bolt (4) to clip. Remove grease line (3).4. Remove nuts (6). Remove cover (5) and the gasket. 5. Loosen bolt (12) enough to leave a gap of 3.18 mm (.125 in) between washers (11) and the fuel pump drive gear.6. Install tool (A) as shown. Tighten the stud to pull the fuel pump drive gear loose from the taper on the fuel injection pump camshaft.7. Remove tool (A), bolt (12), and washer (11). 8. Identify and disconnect wires (13).9. Remove tube assemblies (15) and (18).10. Remove two bolts (14), fuel transfer pump (17), and the O-ring seal.11. Remove bolts (16), the filter base, the gasket, and filter (19). 12. Fasten the fuel injection pump housing and governor to a hoist.13. Remove two bolts (22), three nuts (21), and the fuel injection pump housing and governor. The weight of the fuel injection pump housing and governor is 29 kg (64 lb.).14. Remove the two O-ring seals from the bottom of the fuel injection pump housing and governor. 15. Loosen screw (25). Remove two screws (26), control assembly (23) and spacers (24).Install Fuel Injection Pump Housing And Governor
Start By:a. remove fuel injection linesb. remove valve cover Number 1 piston must be set at top dead center (TDC) to perform all timing procedures. The engine is seen from the flywheel end when direction of crankshaft rotation is given. 1. Remove the starter.2. Install tool (B) on flywheel housing as shown.3. To find TDC for No. 1 piston;a. Turn the flywheel clockwise (opposite the direction of engine rotation) approximately 30 degrees. This removes all play from the timing gears. If you go past the bolt hole, you must repeat Step (a).b. Turn the flywheel counterclockwise until a 3/8" - 16 x 2 1/4" NC bolt (27) can be installed in the flywheel through the hole in the flywheel housing. The No. 1 and No. 6 pistons are now at top center position. The No. 1 piston is on the compression stroke when the valves of the No. 1 cylinder are closed. The rocker must be free to move up and down.4. If No. 1 piston is not on the compression stroke, remove the 3/8" - 16 x 2 1/4" NC bolt (27) and turn the flywheel 360° counterclockwise. Install the 3/8" bolt as before. The No. 1 piston is now at TDC.
Typical Example5. Install tooling (C) in the fuel injection pump housing as shown. Push on tooling (C) and turn injection pump camshaft (32). When tooling (C) engages the groove (slot) in the camshaft, the fuel injection pump is in the No. 1 piston TDC position.6. Be sure O-ring seals (28), (29), (30) and (31) are in position on the fuel injection pump housing and governor. Put clean engine oil