Information injector assy
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
6pcs/lot Solenoid Valve 23670-0L050,23670-0L090,23670-0R020(0L020),095000-5223(5471),095000-5550,095000-8100(095000-5223(5471))
Huayong EASY TO INSTALL: Direct replacement, suitable and easy to install || Powerful: made of high quality materials and 100% tested before shipment to ensure product safety || TIP: Please check your part number before purchasing
Huayong EASY TO INSTALL: Direct replacement, suitable and easy to install || Powerful: made of high quality materials and 100% tested before shipment to ensure product safety || TIP: Please check your part number before purchasing
Fuel Injector 095000-5223 095000-5224 095000-5225 095000-5226 23910-1240 23670-E0340 23670-E0341，Compatible For Hino TRUCKE13C Engines
QEDADXD Part Number:095000-5223/095000-5224/095000-5225/095000-5226/23910-1240/23670-E0340/23670-E0341 || Precise Fuel Delivery: Ensures accurate fuel injection for improved engine efficiency. || Enhanced Combustion: Optimizes combustion for better power output and lower emissions. || Durable Construction: Built to withstand the demands of heavy-duty diesel engines. || Fuel Efficiency: Helps reduce fuel consumption, lowering overall operating costs.
QEDADXD Part Number:095000-5223/095000-5224/095000-5225/095000-5226/23910-1240/23670-E0340/23670-E0341 || Precise Fuel Delivery: Ensures accurate fuel injection for improved engine efficiency. || Enhanced Combustion: Optimizes combustion for better power output and lower emissions. || Durable Construction: Built to withstand the demands of heavy-duty diesel engines. || Fuel Efficiency: Helps reduce fuel consumption, lowering overall operating costs.
6pcs/lot Solenoid Valve 23670-0L050,23670-0L090,23670-0R020(0L020),095000-5223(5471),095000-5550,095000-8100(095000-5550)
Huayong EASY TO INSTALL: Direct replacement, suitable and easy to install || Powerful: made of high quality materials and 100% tested before shipment to ensure product safety || TIP: Please check your part number before purchasing
Huayong EASY TO INSTALL: Direct replacement, suitable and easy to install || Powerful: made of high quality materials and 100% tested before shipment to ensure product safety || TIP: Please check your part number before purchasing
You can express buy:
USD 42.99
14-06-2025
14-06-2025
ERIKC 095000-5226 Diesel Injector Repair Kits DLLA158P834 Valve For HINO/FIAT 095000-5220 095000-5223 095000-5224 095000-5225
USD 17.99
14-06-2025
14-06-2025
ORLTL 1465A041 Diesel Injector Valve Plate 02# Orifice Fuel for Mitsubishi 095000-5600 HINO 095000-5220 095000-5223 095000-5212
USD 118
14-06-2025
14-06-2025
6pcs/lot Solenoid Valve 23670-0L050,23670-0L090,23670-0R020(0L020),095000-5223(5471),095000-5550,095000-8100 for Denso Injector
Images:
USD 42.99
[14-Jun-2025]
USD 169
[13-May-2025]
USD 78.96
[13-May-2025]
USD 40.99
[13-May-2025]
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 09500-05223 | 23910-1240 | INJECTOR ASSY |
Information:
1. Loosen two bolts (2) and two nuts (3). Remove bolt (1), and remove fan drive belts (4). 2. Remove the nuts and bolts that hold the fan drive in place. Remove fan drive (5).Install Fan Drive
1. Put fan drive (1) in position on the timing gear cover. 2. Install bolts (3) and the nuts loosely. Make a replacement of the belts as a set only.3. Install fan belts (4). Install bolt (2). Make an adjustment to the belt tension with tool (A). Measure the belt farthest away from the engine. Tighten new belts to a gauge indication of 120 5. After the engine is operated at high idle for a minimum of 30 minutes, make another adjustment to the belt tension. The correct tension for used belts is a gauge indication of 90 10.3. Tighten bolts (3) and the nuts that hold the fan drive in place.Disassemble Fan Drive
START BY:a. remove fan drive This is a typical later model fan drive. 1. Remove two bolts (2) that hold the fan adapter to the pulley.2. Remove fan adapter (1) from the pulley. 3. Remove bolts (3) and washer (4). Remove seal (5). 4. Remove pulley (8) from bracket (6).5. Remove bearing (10) and spacer (9) from the pulley. Remove spacer (7), seal (11) and bearing (12) from the pulley.Assemble Fan Drive
1. Install bearing (2) in the rear of pulley (3). 2. Install lip-type seal (1) with tooling (A). The lip of the seal must be away from the bearing. Put 5P960 Multipurpose Type Grease on the lip of the seal.3. Install spacer (5) so the end with the taper is toward the inside of pulley (3).4. Install spacer (6) and bearing (4) in the front of the pulley. 5. Put seal (7) on the front of the pulley. Install the pulley on bracket (8). 6. Install washer (10) and bolts (9) that hold the pulley in position.7. Install the fan drive adapter on the pulley.8. Fill the fan drive with 5P960 Multipurpose Type Grease.
1. Put fan drive (1) in position on the timing gear cover. 2. Install bolts (3) and the nuts loosely. Make a replacement of the belts as a set only.3. Install fan belts (4). Install bolt (2). Make an adjustment to the belt tension with tool (A). Measure the belt farthest away from the engine. Tighten new belts to a gauge indication of 120 5. After the engine is operated at high idle for a minimum of 30 minutes, make another adjustment to the belt tension. The correct tension for used belts is a gauge indication of 90 10.3. Tighten bolts (3) and the nuts that hold the fan drive in place.Disassemble Fan Drive
START BY:a. remove fan drive This is a typical later model fan drive. 1. Remove two bolts (2) that hold the fan adapter to the pulley.2. Remove fan adapter (1) from the pulley. 3. Remove bolts (3) and washer (4). Remove seal (5). 4. Remove pulley (8) from bracket (6).5. Remove bearing (10) and spacer (9) from the pulley. Remove spacer (7), seal (11) and bearing (12) from the pulley.Assemble Fan Drive
1. Install bearing (2) in the rear of pulley (3). 2. Install lip-type seal (1) with tooling (A). The lip of the seal must be away from the bearing. Put 5P960 Multipurpose Type Grease on the lip of the seal.3. Install spacer (5) so the end with the taper is toward the inside of pulley (3).4. Install spacer (6) and bearing (4) in the front of the pulley. 5. Put seal (7) on the front of the pulley. Install the pulley on bracket (8). 6. Install washer (10) and bolts (9) that hold the pulley in position.7. Install the fan drive adapter on the pulley.8. Fill the fan drive with 5P960 Multipurpose Type Grease.