Information injector assy
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Seapple 6pcs Fuel injector 095000-0404 0950000404 Compatible with Hino Engine P11C
Seapple Part Name: Fuel injector || Part Number: 095000-0404 0950000404 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: P11C || Applicable: Compatible with Hino Engine P11C || Package included: 6pcs Fuel injector 095000-0404 0950000404
Seapple Part Name: Fuel injector || Part Number: 095000-0404 0950000404 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: P11C || Applicable: Compatible with Hino Engine P11C || Package included: 6pcs Fuel injector 095000-0404 0950000404
Seapple 1X Fuel injector 095000-0404 0950000404 For Hino Engine P11C
Seapple Part Name: Fuel injector || Part Number: 095000-0404 0950000404 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: P11C || Applicable: For Hino Engine P11C || Package included: 1X Fuel injector 095000-0404 0950000404
Seapple Part Name: Fuel injector || Part Number: 095000-0404 0950000404 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: P11C || Applicable: For Hino Engine P11C || Package included: 1X Fuel injector 095000-0404 0950000404
Seapple 1pcs Fuel injector 095000-0404 0950000404 Compatible with Hino Engine P11C
Seapple Part Name: Fuel injector || Part Number: 095000-0404 0950000404 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: P11C || Applicable: Compatible with Hino Engine P11C || Package included: 1pcs Fuel injector 095000-0404 0950000404
Seapple Part Name: Fuel injector || Part Number: 095000-0404 0950000404 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: P11C || Applicable: Compatible with Hino Engine P11C || Package included: 1pcs Fuel injector 095000-0404 0950000404
You can express buy:
USD 14
28-04-2025
28-04-2025
High quality diesel common rail fuel injector nozzle DLLA145P748 is for electric fuel injector 095000-0404 /23910-1163
USD 19.99
27-04-2025
27-04-2025
Diesel Nozzle DLLA145P748 Common Rail Injector Sprayer DLLA 145 P 748 Fuel Auto Parts DLLA 145P748 for Denso 095000-0404
USD 300.2
02-04-2023
02-04-2023
Common rail fuel injector 23910-1163 095000-0404 for Hino P11C
Images:
USD 329.9
[08-Mar-2023]
USD 13.29
[13-Nov-2022]
USD 20.66
[10-Nov-2022]
USD 26.46
[10-Nov-2022]
Include in #3:
Cross reference number
| Part num | Firm num | Firm | Name |
| 09500-00404 | S2391-0116 | INJECTOR ASSY |
Information:
1. Make a mark on compressor housing (1), cartridge assembly (3) and the turbine housing (4) for correct installation. 2. Loosen clamp assembly (2). Remove compressor housing (1) and cartridge assembly (3) from the turbine housing.3. Remove bolts (6) and plates (5) that hold cartridge assembly in the compressor housing. Remove cartridge assembly (3). 4. Remove O-ring seal (7) from the cartridge assembly. 5. Put cartridge assembly (3) in position in tooling (A) and loosen nut on the compressor wheel with tooling (C).6. Remove nut (8) and the compressor wheel (9). 7. Remove shaft and wheel assembly (10) from the cartridge assembly. 8. Remove shroud (11) from the cartridge assembly. 9. Remove four bolts (12) and then remove backplate (13) from the cartridge assembly.10. Remove spacer (14) from the backplate. 11. Remove two seal rings (15) from the spacer. 12. Remove snap ring (16) from cartridge housing with tool (B). 13. Remove bearing (17) and rings from the cartridge housing.14. Remove snap ring (18) from cartridge housing with tool (B). 15. Turn the cartridge housing over and then remove screws (20), plate (21) and collar (19). 16. Remove bearing (22) from the cartridge housing. 17. Remove snap ring (23) from the cartridge housing with tool (B).Assemble Turbocharger
Make sure all of the oil passages in the turbocharger cartridge housing are clean and free of dirt and foreign material. Put clean engine oil on all parts of the cartridge assembly. 1. Install snap ring (1) in the cartridge housing with tool (A). Make sure the oil hole in plate (5) is open and clean to prevent a bearing failure.2. Install bearing (2), collars (3), plate (5) and screws (4). Tighten the screws to a torque of 2.5 N m (22 lb.in.). Install the rings that hold bearings in position with the round edges of the rings toward the bearings. 3. Turn the cartridge housing over. Install snap ring (6) in the cartridge housing with tool (A). Install bearing (7), ring (8) and ring (9) in the housing. Install snap ring (10) with tool (A). Put 6V2055 High Vacuum Grease in the grooves for seal rings (11) at assembly to one half or more of the depth of the groove all the way around the grooves. 4. Install seal rings (11) on spacer (12). 5. Install spacer (12) in the backplate.6. Put the backplate (13) in position on the cartridge housing and install the bolts that hold it. Tighten the bolts to a torque of 9.5 N m (84 lb.in.). 7. Put the shroud (14) in position on the cartridge housing. 8. Install shaft and wheel assembly (15) in the cartridge housing. 9. Put the cartridge assembly in position in tooling (B).10. Put a small amount of oil on the wheel face that will be under the nut.11. Put compressor wheel (17) in position on the shaft.
Do not put a side force on the shaft when the nut is tightened.
12. Install nut (16) and tighten it to a torque of 4
Make sure all of the oil passages in the turbocharger cartridge housing are clean and free of dirt and foreign material. Put clean engine oil on all parts of the cartridge assembly. 1. Install snap ring (1) in the cartridge housing with tool (A). Make sure the oil hole in plate (5) is open and clean to prevent a bearing failure.2. Install bearing (2), collars (3), plate (5) and screws (4). Tighten the screws to a torque of 2.5 N m (22 lb.in.). Install the rings that hold bearings in position with the round edges of the rings toward the bearings. 3. Turn the cartridge housing over. Install snap ring (6) in the cartridge housing with tool (A). Install bearing (7), ring (8) and ring (9) in the housing. Install snap ring (10) with tool (A). Put 6V2055 High Vacuum Grease in the grooves for seal rings (11) at assembly to one half or more of the depth of the groove all the way around the grooves. 4. Install seal rings (11) on spacer (12). 5. Install spacer (12) in the backplate.6. Put the backplate (13) in position on the cartridge housing and install the bolts that hold it. Tighten the bolts to a torque of 9.5 N m (84 lb.in.). 7. Put the shroud (14) in position on the cartridge housing. 8. Install shaft and wheel assembly (15) in the cartridge housing. 9. Put the cartridge assembly in position in tooling (B).10. Put a small amount of oil on the wheel face that will be under the nut.11. Put compressor wheel (17) in position on the shaft.
Do not put a side force on the shaft when the nut is tightened.
12. Install nut (16) and tighten it to a torque of 4