Information injector assy
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Denso Fuel Injector 095000-0214 ME302570 for Mitsubishi Engine 6M60T
DIGERTECH Part number:ME302570 || Application:for Mitsubishi Engine 6M60T
DIGERTECH Part number:ME302570 || Application:for Mitsubishi Engine 6M60T
Seapple 6X Fuel Injector 095000-0214 ME302570 For Mitsubishi Engine 6M60 6M60T 6M60-T1
Seapple Part Name: Fuel Injector || Part Number: 095000-0214 ME302570 0950000214 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: 6M60T || Applicable: For Mitsubishi Diesel Engine 6M60 6M60T 6M60-T1 || Package included: 6X Fuel Injector 095000-0214 ME302570 0950000214
Seapple Part Name: Fuel Injector || Part Number: 095000-0214 ME302570 0950000214 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need. || Engine Model: 6M60T || Applicable: For Mitsubishi Diesel Engine 6M60 6M60T 6M60-T1 || Package included: 6X Fuel Injector 095000-0214 ME302570 0950000214
SPAKYGIE 6Pcs 095000-0214 ME302570 Fuel Injectors fit for Mitsubishi Engine 6M60T
SPAKYGIE ✨Including:6*Fuel Injectors || ✨Part Number:095000-0214, 0950000214, ME302570 || ✨Fits for Mitsubishi Engine 6M60T || ✨These parts are manufactured directly from high quality companies. This is a quality set that will last. || ✨Please contact us freely if you have any questions.
SPAKYGIE ✨Including:6*Fuel Injectors || ✨Part Number:095000-0214, 0950000214, ME302570 || ✨Fits for Mitsubishi Engine 6M60T || ✨These parts are manufactured directly from high quality companies. This is a quality set that will last. || ✨Please contact us freely if you have any questions.
You can express buy:
USD 288
10-11-2022
10-11-2022
Components :
| 001. | INJECTOR ASSY | 09500-00214 |
| 001. | INJECTOR ASSY | 09500-00214 |
Scheme ###:
| 000. | [01] | 09500-00213 | INJECTOR ASSY | ME132615 |
| 000. | [01] | 09500-00214 | INJECTOR ASSY | ME302570 |
Include in #3:
09500-00214
as INJECTOR ASSY
Cross reference number
| Part num | Firm num | Firm | Name |
| 09500-00214 | ME302570 | INJECTOR ASSY |
Information:
1. Remove the seat retaining ring (1) and pin (2). 2. Remove the seat (3), bolt (4), washers (5) and spring (6).3. Remove the sleeve and bearing assembly from the cylinder and weight assemblies. 4. Remove the retaining ring (7) from sleeve (8).5. Remove bearing (9) and races (10) from sleeve (8). 6. Remove the valve (11) from piston (12).7. Remove the cylinder-to-weight assembly retaining ring (13).8. Remove the weight assembly (14).9. Remove piston (12) and sleeve (15) from the cylinder (16).10. Remove the O-ring seal from the sleeve (15). 11. Remove the speed limiter plug (17), spring (18), and plunger (19) from the governor housing.12. Remove the high idle screw (21) and low idle screw (20). 13. Remove the lever assembly-to-shaft assembly retaining bolt (23) and lock.14. Remove the shaft assembly (22) and lever assembly (24) from governor housing.15. Remove the seal from governor housing. 16. Remove two retaining bolts (25) and lock. Remove the lever (26) and shaft (27) from idle screw housing.17. Remove two seals and bearing from idle screw housing.Assemble Governor
1. Using tool (A) install the inner seal in idle screw housing with spring side of seal facing the driver. Install bearing and outer seal with lip of the seal toward the inside of the housing. Lubricate lip of seal with clean SAE 30 engine oil.2. Position the shaft and lever in the idle screw housing. Install the retaining bolts and lock. 3. Using tool (A), install the seal in the governor housing with spring side of seal toward inside of governor housing. Lubricate lip of seal with clean SAE 30 engine oil.4. Position the lever assembly and shaft in the governor housing. Install the retaining bolt and lock.5. Install the high and low idle screws in the governor housing.6. Install the speed limiter plug, spring, and plunger in the governor housing. 7. Install the O-ring seal (3) on sleeve (4).8. Install piston (2) and sleeve (4) in the cylinder (1). 9. Position the weight assembly (6) on cylinder (7), and install retaining ring (5). 10. Install the valve (9) in piston (10).11. Install the bearing and races in sleeve. Install retaining ring. Install the sleeve and bearing assembly (8) on valve (9). 12. Position the seat (12), bolt (11), washers and spring on the valve (9). Install the retaining pin (14) and retaining ring (13).concluding step: a) connect governor to fuel injection pump housing
1. Using tool (A) install the inner seal in idle screw housing with spring side of seal facing the driver. Install bearing and outer seal with lip of the seal toward the inside of the housing. Lubricate lip of seal with clean SAE 30 engine oil.2. Position the shaft and lever in the idle screw housing. Install the retaining bolts and lock. 3. Using tool (A), install the seal in the governor housing with spring side of seal toward inside of governor housing. Lubricate lip of seal with clean SAE 30 engine oil.4. Position the lever assembly and shaft in the governor housing. Install the retaining bolt and lock.5. Install the high and low idle screws in the governor housing.6. Install the speed limiter plug, spring, and plunger in the governor housing. 7. Install the O-ring seal (3) on sleeve (4).8. Install piston (2) and sleeve (4) in the cylinder (1). 9. Position the weight assembly (6) on cylinder (7), and install retaining ring (5). 10. Install the valve (9) in piston (10).11. Install the bearing and races in sleeve. Install retaining ring. Install the sleeve and bearing assembly (8) on valve (9). 12. Position the seat (12), bolt (11), washers and spring on the valve (9). Install the retaining pin (14) and retaining ring (13).concluding step: a) connect governor to fuel injection pump housing