Information injector assy
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
SINOCMP 095000-0145 095000-0144 Common Rail Fuel Injector 8-94392160-2 8-94362261-4 for Isuzu 6HK1 7.8L Engine T6500 T8500 T7500 Trucks(4 Pcs)
SINOCMP ⭐ Part Number:095000-0145 095000-0144 || ⭐ Provide accurate flow rate and original spray pattern to achieve the best performance in all driving conditions. || ⭐ Constructed from high quality high-alloy steel and plastic covering, manufactured with precision to meet OE standards. Easy to install, fast response, close to original effect. || ⭐ Accumulation are prevented by stainless steel slider and spring assembly, thus prolonging the service life of fuel injection system. || ⭐ Fuel-saving injector have efficient fuel injection and high impedance coil can start quickly in cold environment, with low fuel consumption. || ⭐ Replacing the injector can promote the smooth operation of the engine and the best gas efficiency. || ⭐ When installing a new diesel fuel injectors, please be sure to do the following: firstly clean the fuel line, sceondly replace the diesel filter with a new one. This will prevent the engine from operating improperly due to stuck injectors.
SINOCMP ⭐ Part Number:095000-0145 095000-0144 || ⭐ Provide accurate flow rate and original spray pattern to achieve the best performance in all driving conditions. || ⭐ Constructed from high quality high-alloy steel and plastic covering, manufactured with precision to meet OE standards. Easy to install, fast response, close to original effect. || ⭐ Accumulation are prevented by stainless steel slider and spring assembly, thus prolonging the service life of fuel injection system. || ⭐ Fuel-saving injector have efficient fuel injection and high impedance coil can start quickly in cold environment, with low fuel consumption. || ⭐ Replacing the injector can promote the smooth operation of the engine and the best gas efficiency. || ⭐ When installing a new diesel fuel injectors, please be sure to do the following: firstly clean the fuel line, sceondly replace the diesel filter with a new one. This will prevent the engine from operating improperly due to stuck injectors.
6X-Common Rail Injector 095000-0145 095000-0145 Compatible for Isuzu 6HK1 Engine
Fikowjs TIP: Please purchase according to the old part number, appearance is not able to judge the accuracy of the product. || Product Name:Common Rail Injector || Product Number:095000-0145 095000-0145 || Application: Compatible for Isuzu 6HK1 Engine || NOTE: There are many kinds of products in Fikowjs parts, if you can't find the part number you need, please consult us, we will reply soon!
Fikowjs TIP: Please purchase according to the old part number, appearance is not able to judge the accuracy of the product. || Product Name:Common Rail Injector || Product Number:095000-0145 095000-0145 || Application: Compatible for Isuzu 6HK1 Engine || NOTE: There are many kinds of products in Fikowjs parts, if you can't find the part number you need, please consult us, we will reply soon!
4PCS Fuel Injector 095000-0145 Applicable For Isuzu 6HK1 7.8L Engine
ZLPSFCSM Product Name:Fuel Injector || Product Number:095000-0145 || Application: Applicable For Isuzu 6HK1 7.8L Engine || Strict quality inspection: The product undergoes multiple strict quality inspections from raw materials to finished products, ensuring reliable quality and stable performance. || Friendly Reminder: To save time and avoid unnecessary returns, please confirm the product images, part number, and vehicle compatibility meet your needs before purchasing. If unsure, contact us—we're here to help!
ZLPSFCSM Product Name:Fuel Injector || Product Number:095000-0145 || Application: Applicable For Isuzu 6HK1 7.8L Engine || Strict quality inspection: The product undergoes multiple strict quality inspections from raw materials to finished products, ensuring reliable quality and stable performance. || Friendly Reminder: To save time and avoid unnecessary returns, please confirm the product images, part number, and vehicle compatibility meet your needs before purchasing. If unsure, contact us—we're here to help!
You can express buy:
USD 287.88
13-05-2025
13-05-2025
Original New Diesel Fuel Injector 8-94392261-4 8-94392261-3 095000-0145 095000-0190 095000-0191 Fit For ISUZU 6HK1 Engine
USD 171.72
13-05-2025
13-05-2025
China Made Diesel Injector 095000-0141 095000-0142 095000-0190 095000-0145 8-94392261-4 Fit For ISUZU Engine 8-94392261-3
USD 287.88
13-05-2025
13-05-2025
Genuine New Common Injector 8-94392261-4 , 8-94392261-3 , 095000-0145, 095000-0190, 095000-0191 FOR ISUZU 6HK1 ENGINE
Images:
USD 276.66
[13-May-2025]
USD 295
[10-Nov-2022]
Components :
| 001. | INJECTOR ASSY | 09500-00145 |
| 001. | INJECTOR ASSY | 09500-00145 |
Scheme ###:
| 000. | [01] | 09500-00144 | INJECTOR ASSY | 8-94392160-2 |
| 000. | [01] | 09500-00145 | INJECTOR ASSY | 8-94392160-3 |
Include in #3:
09500-00145
as INJECTOR ASSY
Cross reference number
| Part num | Firm num | Firm | Name |
| 09500-00145 | 8-94392160 | INJECTOR ASSY |
Information:
Introduction
Reference Special Instruction, REHS5606, "Installation Guide for Particulate Trap Exhaust Filters"Reference Special Instruction, REHS1841, "General Welding Procedures" Reference Special Instruction, REHS5606, "Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications"This special instruction provides information for the installation of the Caterpillar Diesel Particulate Filter (DPF) on the machines that are listed.Before performing this procedure, you must read and thoroughly understand the guidelines in Special Instruction, REHS5606, "Installation Guide for Particulate Trap Exhaust Filters" for important installation, general maintenance, testing, and cleaning information that is not included in this publication. Understanding the alarm operation and the maintenance requirements by the owner and the operator is important.The Caterpillar Diesel Particulate Filter includes the following: a particulate exhaust filter, an exhaust monitor, a thermocouple and parts needed for the installation. The Diesel Particulate Filter replaces the muffler. The Diesel Particulate Filter requires additional brackets and modifications for the installation.The Caterpillar Diesel Particulate Filter is used to reduce particulate matter, carbon monoxide, and hydrocarbons from diesel engine exhaust through catalytic oxidation and filtration. These filters are self-regenerating, so the filters do not need to be replaced. The filters will periodically burn off the accumulated soot. For this application, the following requirements must be met. Refer to Special Instruction, REHS5606, "Installation Guide for Particulate Trap Exhaust Filters" for important installation, general maintenance, testing, and cleaning information that is not included in this publication.
Ultra-Low Sulfur Diesel Fuel must be used. Ultra-Low Sulfur Diesel Fuel must have an average sulfur content of 15 ppm. The maximum sulfur content of the fuel must not exceed 30 parts per million (ppm).
The Exhaust Temperature of the engine must be greater than 240 °C (464 °F) for at least 40% of the time.
The ratio of emissions of Oxides of Nitrogen (NOx) to Particulate Matter must be a minimum of 20. This ratio should be higher for applications that involve a lower temperature. This technology is currently applicable to 1996 and newer engines.
The engine should be well maintained and the engine should not be consuming oil at an excessive rate (a rate that is greater than the engine specification).Engine oil with a high API category rating is the best engine oil. Acceptable oil grades for the Diesel Particulate Filter are CH-4, CI-4, and CJ-4. Diesel Particulate Filter CI-4 oil is superior to CH-4 oil. CJ-4 oil is superior to CI-4 oil. CJ-4 oil is highly recommended due to a low ash specification that results in better Diesel Particulate Filter performance.
Illustration 1 g01035610
Typical Operating Range for a DPFRefer to Illustration 1 for the typical operating range of a DPF.Note: You must read and thoroughly understand all of the instructions within this special instruction before you attempt any part of the procedure. Refer to Special Instruction, REHS5606, "Installation Guide for Particulate Trap Exhaust Filters" for important installation, general maintenance, testing, and cleaning information that is not included in this publication.Safety
Diesel Particulate Filters (DPF) are not applicable to all engines. A Diesel Particulate Filter should typically not
Reference Special Instruction, REHS5606, "Installation Guide for Particulate Trap Exhaust Filters"Reference Special Instruction, REHS1841, "General Welding Procedures" Reference Special Instruction, REHS5606, "Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications"This special instruction provides information for the installation of the Caterpillar Diesel Particulate Filter (DPF) on the machines that are listed.Before performing this procedure, you must read and thoroughly understand the guidelines in Special Instruction, REHS5606, "Installation Guide for Particulate Trap Exhaust Filters" for important installation, general maintenance, testing, and cleaning information that is not included in this publication. Understanding the alarm operation and the maintenance requirements by the owner and the operator is important.The Caterpillar Diesel Particulate Filter includes the following: a particulate exhaust filter, an exhaust monitor, a thermocouple and parts needed for the installation. The Diesel Particulate Filter replaces the muffler. The Diesel Particulate Filter requires additional brackets and modifications for the installation.The Caterpillar Diesel Particulate Filter is used to reduce particulate matter, carbon monoxide, and hydrocarbons from diesel engine exhaust through catalytic oxidation and filtration. These filters are self-regenerating, so the filters do not need to be replaced. The filters will periodically burn off the accumulated soot. For this application, the following requirements must be met. Refer to Special Instruction, REHS5606, "Installation Guide for Particulate Trap Exhaust Filters" for important installation, general maintenance, testing, and cleaning information that is not included in this publication.
Ultra-Low Sulfur Diesel Fuel must be used. Ultra-Low Sulfur Diesel Fuel must have an average sulfur content of 15 ppm. The maximum sulfur content of the fuel must not exceed 30 parts per million (ppm).
The Exhaust Temperature of the engine must be greater than 240 °C (464 °F) for at least 40% of the time.
The ratio of emissions of Oxides of Nitrogen (NOx) to Particulate Matter must be a minimum of 20. This ratio should be higher for applications that involve a lower temperature. This technology is currently applicable to 1996 and newer engines.
The engine should be well maintained and the engine should not be consuming oil at an excessive rate (a rate that is greater than the engine specification).Engine oil with a high API category rating is the best engine oil. Acceptable oil grades for the Diesel Particulate Filter are CH-4, CI-4, and CJ-4. Diesel Particulate Filter CI-4 oil is superior to CH-4 oil. CJ-4 oil is superior to CI-4 oil. CJ-4 oil is highly recommended due to a low ash specification that results in better Diesel Particulate Filter performance.
Illustration 1 g01035610
Typical Operating Range for a DPFRefer to Illustration 1 for the typical operating range of a DPF.Note: You must read and thoroughly understand all of the instructions within this special instruction before you attempt any part of the procedure. Refer to Special Instruction, REHS5606, "Installation Guide for Particulate Trap Exhaust Filters" for important installation, general maintenance, testing, and cleaning information that is not included in this publication.Safety
Diesel Particulate Filters (DPF) are not applicable to all engines. A Diesel Particulate Filter should typically not