Fuel injectors
  1. Home
  2. denso
  3. #09450-08290

09450-08290 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

Nozzle: 0935005070
09450-08290 PUMP ASSY, INJECTI
Rating:
42
Buy PUMP ASSY, INJECTI 09450-08290 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-08290

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-08290 PUMP ASSY, INJECTI 1G735-51011
001. [01] 09011-12490 HOUSING, PUMP
002. [03] 09013-00450 HOLDER SUB-ASSY, D 16415-51221
003. [03] 09013-61100 SPRING, DELIVERY V 16454-51231
004. [03] 09013-70130 GASKET, DELIVERY V 11420-51241
005. [03] 09014-02310 VALVE SUB-ASSY, IN 16454-51031
006. [03] 09015-05150 ELEMENT SUB-ASSY,
008. [03] 09016-30082 SEAT, SPRING, UPR 15221-51271
009. [03] 09016-40170 SPRING, PUMP PLUNG 15221-51281
010. [03] 09016-10210 SLEEVE, PLUNGER CO 15221-51382
011. [03] 09017-00170 TAPPET SUB-ASSY,IN 15221-51071
011-001. [03] 09017-10022 TAPPET, INJECTION 15021-51990
011-002. [03] 09217-60010 ROLLER, FEED PUMP 15109-52931
011-003. [03] 09017-60020 PIN, INJECTION PUM 15021-51970
012. [01] 09021-00220 RACK ASSY, CONTROL 15321-51061
015. [01] 09024-50160 SCREW, HOLLOW 15521-51321
016. [02] 09024-10010 WASHER, AIR BLEEDE 15221-96651
017. [03] 09018-30050 PIN, INJECTION PUM 14611-51251
018. [03] 09030-10060 SEAT, SPRING, LWR 15021-51291
019. [01] 09046-70040 PLATE 19484-51461
020. [03] 90802-20150 O-RING 14611-51201
020. [03] 09013-90410 O-RING
022. [3C] 09031-10530 PLATE, TAPPET ADJU
022. [3C] 09031-10520 PLATE, TAPPET ADJU
022. [3C] 09031-10510 PLATE, TAPPET ADJU
022. [3C] 09031-10500 PLATE, TAPPET ADJU
022. [3C] 09031-10490 PLATE, TAPPET ADJU
022. [3C] 09031-10060 PLATE, TAPPET ADJU
022. [3C] 09031-10050 PLATE, TAPPET ADJU
022. [3C] 09031-10040 PLATE, TAPPET ADJU
022. [3C] 09031-10030 PLATE, TAPPET ADJU
022. [3C] 09031-10020 PLATE, TAPPET ADJU
023. [01] 09023-10070 PLATE, DELIVERY VA
024. [01] 09023-20070 PLATE, DELIVERY VA
026. [02] 94904-44330 BOLT
050. [01] 09023-00080 PLATE SET, VALVE H 16415-51611

Include in #3:

09450-08290 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-08290  1G735-5101  PUMP ASSY, INJECTI
1G735-51011    KUBOTA PUMP ASSY, INJECTI




Information:

2. Remove two short bolts (1) and two longer bolts (3) from manifold (2) and BrakeSaver housing. Remove manifold (2). Remove the O-ring seals from the manifold. 3. Remove oil temperature sensing unit (4) from the BrakeSaver control valve.4. Disconnect air line (5) and hose assembly (6) from the BrakeSaver control valve. 5. Remove bolt (7) and retainer (8) that hold the oil lines in the BrakeSaver control valve. 6. Disconnect oil lines (9) and (10) from the oil cooler. Remove oil lines (9) and (10) from the BrakeSaver control valve. 7. Remove bolts (12) and BrakeSaver control valve (11) from under the oil pan. The weight is 48 lb. (22 kg).8. Remove elbow (13) from the BrakeSaver control valve. Remove the O-ring seals.Install Brakesaver Control Valve
1. Inspect the O-ring seals for damage and make replacements if needed. Put clean oil on the O-ring seals. 2. Install the O-ring seals and elbow (3) on the BrakeSaver control valve.3. Make sure the O-ring seals are in position on the face of the BrakeSaver control valve. Put BrakeSaver control valve (1) in position under the oil pan. Install bolts (2) that hold the BrakeSaver control valve to the oil pan. 4. Install oil temperature sensing unit (4) in the BrakeSaver control valve.5. Connect air line (5) and hose assembly (6) to the BrakeSaver control valve. 6. Install O-ring seals (7) and (8) on manifold (9). Install manifold (9) in the BrakeSaver control valve. Install the four bolts that hold the manifold to the BrakeSaver housing. 7. Make sure the O-ring seals are in place on the oil lines and install oil lines (10) and (11). 8. Install retainer (12) to hold the oil lines in the BrakeSaver control valve. If the bottom plug in the oil pan was removed, put the split (seam) of the gasket for the plug against the oil pan. If either plug on the side of the oil pan was removed, put 5P3413 Pipe Sealant on the threads and tighten the plug to a torque of 60 8 lb. ft. (80 11 N m).9. Fill the engine with oil. See LUBRICATION AND MAINTENANCE GUIDE.Disassemble Brakesaver Control Valve
start by:a) remove BrakeSaver control valve 1. Remove O-ring seals (1) from the valve body.
Spring force is behind the cover at removal.
2. Remove four bolts (2) slowly and evenly from cover (4). Remove the cover.3. Remove cover (3) and the seal from the opposite end of the valve body. 4. Remove spool (8) as an assembly.5. Remove spring (7), stop (10), spring (6) and slug (9).6. Remove the O-ring seals and sleeve (5). 7. Remove bolt (11), plate (13) and diaphragm (12) from the spool. Make an inspection of the pin on the spool, and make a replacement of the pin if there is damage or wear.Assemble Brakesaver Control Valve
1. Install diaphragm (4) and plate (8) on valve spool (3). Make alignment of the hole in the plate valve with the pin on the spool. Install the bolt

Have questions with 09450-08290?





09450-08280 PUMP ASSY, INJECTI 09450-08270 09450-08260 09450-08250 09450-08240
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-08290

Back to top