Fuel injectors
  1. Home
  2. denso
  3. #09450-07691

09450-07691 PUMP ASSY, INJECTI Denso Cross


 

Information pump assy, injecti

09450-07691 PUMP ASSY, INJECTI
Rating:
15
Buy PUMP ASSY, INJECTI 09450-07691 genuine, new aftermarket engine parts with delivery

Components :

001. PUMP ASSY, INJECTI 09450-07691

Scheme ###:

PUMP ASSY, INJECTI
000. [01] 09450-07691 PUMP ASSY, INJECTI 31A6505011
005. [01] 09011-05070 HOUSING SUB-ASSY, 47X0104200
006. [04] 09013-10520 HOLDER, DELIVERY V
007. [04] 09013-60640 SPRING, DELIVERY V
008. [04] 09013-70130 GASKET, DELIVERY V
009. [04] 09014-02500 VALVE SUB-ASSY, IN 47X0104300
010. [04] 09015-05450 ELEMENT SUB-ASSY, 47X0104400
011. [04] 09016-10210 SLEEVE, PLUNGER CO
012. [04] 09016-30082 SEAT, SPRING, UPR MM501098
013. [04] 09016-40170 SPRING, PUMP PLUNG
014. [04] 09017-00170 TAPPET SUB-ASSY,IN EZ01775027
014-001. [04] 09017-10022 TAPPET, INJECTION
014-002. [04] 09217-60010 ROLLER, FEED PUMP 09217-60010
014-003. [04] 09017-60020 PIN, INJECTION PUM
015. [04] 09018-30050 PIN, INJECTION PUM
016. [01] 09021-00440 RACK ASSY, CONTROL
017. [04] 09030-10060 SEAT, SPRING, LWR EZ0177514
018. [02] 09046-70030 PLATE
019. [4C] 09031-10010 PLATE, TAPPET ADJU 09031-10010
019. [4C] 09031-10310 PLATE, TAPPET ADJU
019. [4C] 09031-10300 PLATE, TAPPET ADJU
019. [4C] 09031-10280 PLATE, TAPPET ADJU
019. [4C] 09031-10170 PLATE, TAPPET ADJU FR51530028
019. [4C] 09031-10160 PLATE, TAPPET ADJU FR51530027
019. [4C] 09031-10140 PLATE, TAPPET ADJU 09031-10140
019. [4C] 09031-10130 PLATE, TAPPET ADJU 09031-10130
019. [4C] 09031-10120 PLATE, TAPPET ADJU 09031-10120
019. [4C] 09031-10110 PLATE, TAPPET ADJU 09031-10110
020. [01] 94901-81020 WASHER, COPPER PLA 94901-81020
021. [01] 09024-40180 SCREW, AIR BLEEDER
022. [01] 94918-00310 SCREW, HOLLOW 85265-00078
023. [03] 09006-80020 PLATE, ADJUSTING
024. [03] 94904-80800 BOLT, WASHER HEAD MM514195
025. [04] 90802-20150 O-RING
025. [04] 09013-90410 O-RING 47X0122700

Include in #3:

09450-07691 as PUMP ASSY, INJECTI

Cross reference number



Part num Firm num Firm Name
09450-07691  31A6505011  PUMP ASSY, INJECTI




Information:

1. Remove all of bolts (1) and bolts (2) and (3).2. Use two 3/8"-16 NC forcing screws and remove stator (4) from the flywheel housing. 3. If necessary remove the lip type seal from stator (4) with a hammer and punch. 4. Remove the six O-ring seals (6) from the flywheel housing.5. Remove rotor (5) from the crankshaft. 6. Remove the seal ring from carrier (8).7. If necessary remove carrier (8) and sleeve (7) from rotor (5). The carrier and sleeve will have damage after removal. Use new parts for replacement.Install BrakeSaver
1. If the carrier and sleeve were removed from the rotor, heat the new parts to a maximum temperature of 300° F (149° C). 2. Install carrier (2) on rotor (3).3. Put 7M7260 Liquid Gasket Material on the outside diameter (4) of rotor (3) and let it dry. Install sleeve (1) on rotor (3) as shown. 4. Install seal ring (5) in the carrier. 5. Install two 3/4"-16 NF guide bolts (6) a minimum of 5 in. long in the crankshaft.6. Make sure the O-ring seal is on rear face of the crankshaft seal carrier and install rotor (3) on the guide bolts with the marked bolt hole of the rotor in alignment with the marked hole of the crankshaft. 7. Use tool (A) and a press to install the seal in stator (7) as shown. 8. Install O-ring seal in position on stator (7). Install O-ring seals (8) in the flywheel housing.9. Put stator (7) in position on the flywheel housing. 10. Put 9S3263 Thread Lock on the threads of the bolts that hold the stator and install them. Tighten all of bolts (9) evenly to a torque of 40 5 lb. ft. (55 7 N m). Tighten bolts (10) and (11) to a torque of 90 10 lb. ft. (120 14 N m).end by: a) install flywheel

Have questions with 09450-07691?





09450-07680 PUMP ASSY, INJECTI 09450-07670 09450-07660 09450-07640 09450-07631
01700061 PUMP ASSY, FUEL FE 01705213 PUMP ASSY, INJECTI 01705223 01705242 01705252

Group cross 09450-07691

Back to top