Information pump assy, injecti
Nozzle:
0935003840

Rating:
Components :
001. | PUMP ASSY, INJECTI | 09450-07290 |
Scheme ###:
000. | [01] | 09450-07290 | PUMP ASSY, INJECTI | 31A6503060 |
005. | [01] | 09011-05070 | HOUSING SUB-ASSY, | 47X0104200 |
006. | [04] | 09013-10520 | HOLDER, DELIVERY V | |
007. | [04] | 09013-60540 | SPRING, DELIVERY V | |
008. | [04] | 09013-70130 | GASKET, DELIVERY V | |
009. | [04] | 09014-02610 | VALVE SUB-ASSY, IN | 47X0107700 |
010. | [04] | 09015-05550 | ELEMENT SUB-ASSY, | 47X0105400 |
011. | [04] | 09016-10210 | SLEEVE, PLUNGER CO | |
012. | [04] | 09016-30082 | SEAT, SPRING, UPR | MM501098 |
013. | [04] | 09016-40170 | SPRING, PUMP PLUNG | |
014. | [04] | 09017-00170 | TAPPET SUB-ASSY,IN | EZ01775027 |
014-001. | [04] | 09017-10022 | TAPPET, INJECTION | |
014-002. | [04] | 09217-60010 | ROLLER, FEED PUMP | 09217-60010 |
014-003. | [04] | 09017-60020 | PIN, INJECTION PUM | |
015. | [04] | 09018-30050 | PIN, INJECTION PUM | |
016. | [01] | 09021-00440 | RACK ASSY, CONTROL | |
017. | [04] | 09030-10060 | SEAT, SPRING, LWR | EZ0177514 |
018. | [02] | 09046-70030 | PLATE | |
019. | [4C] | 09031-10010 | PLATE, TAPPET ADJU | 09031-10010 |
019. | [4C] | 09031-10310 | PLATE, TAPPET ADJU | |
019. | [4C] | 09031-10300 | PLATE, TAPPET ADJU | |
019. | [4C] | 09031-10280 | PLATE, TAPPET ADJU | |
019. | [4C] | 09031-10170 | PLATE, TAPPET ADJU | FR51530028 |
019. | [4C] | 09031-10160 | PLATE, TAPPET ADJU | FR51530027 |
019. | [4C] | 09031-10140 | PLATE, TAPPET ADJU | 09031-10140 |
019. | [4C] | 09031-10130 | PLATE, TAPPET ADJU | 09031-10130 |
019. | [4C] | 09031-10120 | PLATE, TAPPET ADJU | 09031-10120 |
019. | [4C] | 09031-10110 | PLATE, TAPPET ADJU | 09031-10110 |
020. | [01] | 94901-81020 | WASHER, COPPER PLA | 94901-81020 |
021. | [01] | 09024-40180 | SCREW, AIR BLEEDER | |
022. | [01] | 94918-00310 | SCREW, HOLLOW | 85265-00078 |
023. | [03] | 09006-80020 | PLATE, ADJUSTING | |
024. | [03] | 94904-80800 | BOLT, WASHER HEAD | MM514195 |
025. | [04] | 90802-20150 | O-RING | |
025. | [04] | 09013-90410 | O-RING | 47X0122700 |
Include in #3:
09450-07290
as PUMP ASSY, INJECTI
Cross reference number
Part num | Firm num | Firm | Name |
09450-07290 | 31A6503060 | PUMP ASSY, INJECTI | |
31A6503060 | MITSUBISHI | PUMP ASSY, INJECTI |
Information:
Engine Crankshaft Will Not Turn Recommended Procedure1. Low or No Battery Voltage ... Check battery voltage. If battery voltage is less than 8 volts for a 12 volt system, or 16 volts for a 24 volt system, put a charge to the battery. If battery will not hold a charge, load test the battery as shown in the ELECTRICAL SYSTEM of the Testing and Adjusting section of this Service Manual.2. Bad Switch, Bad Wiring or Connection in Switch Circuit ... With ignition switch in START position, check voltage at switch connection on starter solenoid. If there is no voltage, or if the voltage is low at this connection, check wiring, connections, ignition switch, and magnetic switch (if used).3. Bad Cable or Connection; Battery to Starter... With ignition switch in the START position, check voltage at connection of battery cable to starter. If there is no voltage, or if the voltage is low at